介绍了提升工业废热温位的吸收式热变换器的工作原理，工质的热力循环过程。
The principle and thermodynamic cycle of the absorption heat transformer used for upgrading low grade industrial waste heat are introduced.
由此可以得出结论，在回收废热方面，从热力学角度来看，高低型二级热变换器具有很好的应用价值，并联型相对一般，而低高型根本不具有实际应用价值。
From the view of thermodynamics, conclusions can be drawn that the high-low cycle is good to be used to recover waste heat, the parallel cycle is not relatively, and the low-high cycle is not at all.
为了从红外热图像中识别和跟踪目标，提出了一种采用数学形态学和小波变换相结合的红外图像处理新方法。
In the purpose of recognizing and tracking targets from infrared thermal images, an infrared image processing algorithm based on mathematical morphology and wavelet transform was presented.
利用热弹体运动方程和热传导方程耦合问题的变换域解，求解其极点留数的解析表达式。
For the transformed solution of the thermoelastic and heat conduction equations coupled problem, the analytical representation of the pole residues is obtained.
通过积分变换方法，求解热传导和热弹性力学方程组，由此得到激光辐照引起的温度场和热应力场的瞬态分布。
The equations of heat conduction and thermoelastic dynamics are solved through integral-transform method. Transient distribution of temperature field and thermal stress field is described.
空穴的存在增大了热阻，从而影响相变换热过程。
The void enlarges heat resistance, and then affects the phase change heat transfer process.
通过傅立叶变换的红外光谱（FTIR）、热重分析仪（TGA）证实疏水单体对凝胶进行了疏水改性。
The hydrophobic modification of gel with hydrophobic monomers was proved by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA).
本文介绍了一种新型管壳式换热器及其在化肥厂合成氨变换式段作为气一气换热设备的使用情况。
This paper introduces a new and high effect Shell-Tube heat exchanger and its an application to chemical fertilizer plants.
经过适当的输入变换和动态解耦，结合轧辊的热传输特性，最后获得了简单、实用的轧辊局部冷却控制模型。
By proper transforming of the system input and dynamic decoupling, a simple and useful model for partial cooling control has been obtained on the basis of the thermal transfer characteristic of rolls.
对汽液两相的流动工况也可以用边缘检测小波变换去进行分析，并实现对汽液两相流动的热工数值检测。
It is also possible to analyze a gas liquid two phase flow condition through an edge detection of wavelet transformation and detect thermodynamic data in a gas liquid two phase flow.
为了提高红外跟踪系统的图像识别精度，本文针对红外探测器生成的空中目标图像，提出用基于小波变换的遗传算法对红外热图像进行处理。
In order to improve the image discernment precision of infrared tracking system, the genetic algorithms based on wavelet transform is used in the processing of aerial target thermal image.
本文主要针对碟式太阳能热动力发电系统中的跟踪控制系统、热电转换装置、电力变换装置和交流稳压装置做了一些相应的研究和应用工作。
This thesis does some corresponding researches and application works for the Tracking-Control System, the Thermoelectric Converter, the Electric Power Transducer and the AC Stabilizer of the system.
方法：运用傅立叶变换红外光谱、拉曼光谱、热分析和粉末x -射线衍射法研究马来酸替加色罗的晶型。
Methods: FTIR, Raman spectroscopy, thermal analysis and powder X-ray diffraction were applied to study the crystal forms of tegaserod maleate.
介绍了利用傅里叶变换红外光谱（ FT-IR）和差示扫描量热法（ DSC）对FEVE与PVDF系建筑装饰用氟碳涂层进行定性鉴定的方法，并用实例加以说明。
The qualitative test method using FT-IR and DSC for architectural decoration fluorocarbon coatings such as FEVE and PVDF has been introduced. Some examples were used for better explanation.
CO变换反应催化剂床层排热多采用变换炉段间换热方式。
The CO shift reaction uses heat transfer technique by the sections of shift converter to remove heat.
利用夹点技术对全低变换热网络进行优化设计，得到的新网络流程不需要外供蒸汽。
By the use of the pinch point technique the all LTS heat exchange network is optimized in design, and the new network process obtained does not need external supply of steam.
基于能量平衡方程建立了热烟气层轰燃模型，经量纲归一化和微分同胚变换，得到属于燕尾突变的势函数。
A catastrophe potential function, which has the same form of swallowtail catastrophe, was obtained by dimensional normalization and diffeomorphism.
几章涉及浪费的各种各样的方法处理，包括热解，氢化，把制成堆肥，以及对一层粉薄层的变换。
Several chapters deal with various methods of waste processing, including pyrolysis, hydrogenation, composting, and conversion to a powder coating.
本文以大功率电子组件DC/DC电源变换器为例，提出了基于通用的大型有限元分析软件ANSYS进行热模拟分析方法，并利用实验结果对模拟结果进行了验证。
In the paper, a thermal simulation method has been described using ANSYS software based DC/DC power module. Experiment has been done to verify the result of the thermal simulation.
检测发动机冷却液温度，判断发动机的热状态，并将温度信号变换为电信号传送给电脑ecu。
To test the temperature of the cooling fluid in the engine, and judge the heat condition of the engine, and then change the temperature signal into electrical signal to pass to computer ECU.
在圆柱坐标系中利用积分变换法，求解热传导和热弹性力学方程组。
The equations of heat conduction and thermoelastic dynamics are solved through integral-transform method in circular cylindrical coordinates.
用傅立叶变换红外光谱（FT-IR）方法表征了珠状共聚物的结构，并用热分析仪考察了共聚物的热性能。
The structure and thermal capability of bead like copolymer are characterized by FT-IR and thermogravimetry.
通过改变换热翅片之间的距离也就是换热翅片在换热管上的排列密度，使回风畅通。
The return air is unblocked by changing the distances among heat exchange fins, i. e. the arrangement density of the heat exchange fins on a heat exchange pipe.
本文通过扫描电镜、等离子体光谱分析、热重分析、13c核磁共振波谱分析、傅立叶红外变换光谱分析，对它进行物质结构的鉴定和元素含量分析。
The structure identification and the element content analysis were investigated with scanning electron microscope, plasma spectral analysis, TG analysis, 13c NMR and FTIR spectral analysis.
只要变换电源极性就能致冷或者致热。
The utility model can refrigerate or heat as long as transforming the polarity of a power source.
只要变换电源极性就能致冷或者致热。
The utility model can refrigerate or heat as long as transforming the polarity of a power source.
应用推荐