介绍应用计算机技术，实现机床主轴热变形试验各侧点的温度、热变形的在线检测和数据处理。
This paper deals with application of computer technology to accomplish the temperature and hot, deformed on-line measurement and data process in the main shaft hot deformed experiment of machine tool.
本文通过车辙试验讨论了衡量沥青砼热稳性的两个指标：动稳定度和相对变形。
This paper discusses the two indexes, dynamic stability and relative deformation, that evaluate the high temperature stability of the asphalt mixture by rutting test.
利用单轴加载系统和红外热成像技术，对山西水峪矿的煤岩变形过程中的红外辐射变化进行了探测试验研究。
With the single axial loading system and the infrared hot image technology, a probing test research on infrared radiation changes of the coal and rock deformation in Shanxi Shuiyu Mine was conducted.
通过镦粗工艺试验，确定了该材料的热变形工艺参数，并对其进行了等温模锻工艺研究。
The technological parameter of heat deformation was confirmed by the test of Upsetting technology, and the isothermal stamping was studied.
在试验基础上就一般强度船板钢热变形时奥氏体再结晶百分数及晶粒尺寸与工艺参数的关系进行了研究。
According to the experiment, the effects of rolling parameters on the extent of austenite recrystallization and grain size show a varying way in different temperature area.
提出了通过显示奥氏体实际晶粒度、裂纹形貌和扩展方式来分析热锻模具型腔表层塑性变形行为的试验方法。
This paper advanced a study method that can observe plastic deformation behavior of surface layer of die cavity by showing austenite grain, size, crack morphology and propagation mode.
以WF6和H2为原料，粉末冶金钨板为基体，采用热丝开管气流化学气相沉积试验装置，成功地制备出可变形钨锭。
Using WF6 and H2 as raw materials, tungsten plate formed by powder metallurgy as substrate, the deformable tungsten ingots were prepared successfully by a hot-wire CVD experimental facility.
热连轧；热模拟试验；变形抗力；本构方程；数据库。
Hot continuous rolling; Thermal simulation experiment; Deformation resistance; Constitutive equation; Database.
公司主要产品有：电子拉力、电子万能试验机系列；热变形。
Our main products are: E-Rally, electronic universal testing machine series; hot deformation.
应用变形速率连续可变式热裂纹试验方法(VDR法)研究了碳、钼和稀土元素对奥氏体不锈钢焊缝热裂敏感性的影响。
The effect of carbon, molybdenum and rare earths on hot cracking susceptibility of austenitic stainless steel welds was studied with continuously variable deformation rate cracking test (VDR) method.
提出了采用热扭转试验来模拟金属材料热变形时塑性变形程度与晶粒大小相互关系的方法。
The method of relationship between plastic deformation degree and grain size was put forward, when the thermos-deformation of metal was simulated by the thermos-torsion test.
本文从引入虚元的热弹性板元有限元计算和试验测定两方面分析研究了平板堆焊时平面外变形的形态及产生机制。
In present paper, the form and mechanism of formation of out-of-plane distortion during bead-on-plate welding was studied by thermal clastic analysis with introduction of dummy element and experiment.
采用单道次压缩试验，研究了变形温度和变形速率对SS400钢热变形行为的影响。
Effects of SS400 steel's deformation temperature and strain rates on its deformation behavior was studied using single pass compressing test.
采用等温热压缩试验对一种自行研制的高强度易切削锌基合金进行热变形行为的研究。
The hot deformation behavior of a self-developed zinc based alloy was investigated by isothermal compression test.
试验结果发现，三者对圆锯片的热变形均有较大的影响：当开5个径向槽时圆锯片的热变形最小；
Results found that under the same condition, a circular sawblade with 5 slots showed the best thermal stability.
用热扭转试验机，实现了热变形模拟轴承钢控制轧制工艺。
The simulation of controlled hot rolling process of bearing steel (GCr15) has been realized by use of hot torsion test equipment.
结果表明：试验用钢只发生珠光体转变和马氏体转变；热变形明显地促进珠光体、马氏体转变；
The results show that the pearlite and martensite transformation occur at different cooling rates;
结果表明：试验用钢只发生珠光体转变和马氏体转变；热变形明显地促进珠光体、马氏体转变；
The results show that the pearlite and martensite transformation occur at different cooling rates;
应用推荐