冶炼周期缩短，每天可多炼一炉钢；
The converter can increase smelting a stove steel daily throng shorten melting period.
这大大缩短了一炉钢的冶炼时间。
This resulted in greatly reducing the time of a single heat.
提高转炉供氧强度可以有效地缩短每炉钢的吹氧时间。
The time of blowing oxygen can be shorten efficaciously by increasing supplying oxygen intensity in converter.
建立了以温度跟踪为目的的全氢罩式炉钢卷退火过程在线数学模型。
A on-line mathematical model for tracing coil temperature of the bell-type furnace is established based on the two-dimensional, axisymmetric, transient heat conduction equation.
在宝钢炼钢厂投入运行以来，共控制冶炼812炉钢（钢种60多个），获经济效益近百万元。
Since bring into service, the system has controlled more than 812 heats and steel varieties over 60, and got economical benefit near 1000000 yuan.
转炉补炉后第一炉钢，由于加入了大量的补炉料，补炉第一炉后成渣过程和转炉渣的成分发生变化，造成转炉终点磷偏高。
The phosphorus content of the end point in the first heat of converter steelmaking after fettling was higher than normal operation, because of the fettling material in the converter.
茧状挂炉可以360度旋转，它由碳素钢或不锈钢制成，可根据您的天花板来调节挂炉高度。
Coocon Fireplace can rotate 360 degrees and it comes in black or stainless steel with varying pole heights to accommodate your ceiling.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。
The effects of baking temperature, baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and BH sheet steel produced by batch annealing were studied.
喂丝机是炉外精炼设备之一，它对提高钢的质量具有十分重要的意义。
Metal thread feeding machine is one of the refining equipment outside the steel-making furnace, which is quite important to improve steel-making quality.
本文介绍了锡兴钢铁公司，为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。
This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.
真空炉高温除气工艺可以大大降低不锈钢出气率。
The stainless steel out \ | gassing rates can be reduced greatly by high temperature degassing technology in a vacuum furnace.
因此，围绕着竖炉法直接冶炼不锈钢母液的实践和理论研究这一主线，开展了卓有成效的研究工作。
Therefore, fruitful research have been carried out according to the main line of practice and theory of directly producing master alloys by a shaft furnace.
简要分析了石钢大方坯步进梁式加热炉的主要技术参数、工作原理、技术特点，介绍了该加热炉在石钢的应用情况。
The main technical parameters, work theory, technical features of walking-beam heating furnace for big square billet are analyzed simply, its utilization in Shi Steel introduced.
工作室的尺寸范围从362- 747平方英尺，每个工作室都有一个小厨房配有微波炉、冰箱、不锈钢台面、大理石浴室和高档厨房配件。
Studios range in size from 362-747 sq ft. Each studio has a kitchenette with microwave, mini-refrigerator, stainless steel countertops, marble bath and upscale kitchen accessories.
中频感应炉将不锈钢生产中产生的烟尘冶炼镍铬铁，技术上可行，社会效果和经济效益显著。
The technology makes it feasible that nickel-chromium ferroalloys can be produced with the stainless steel fume in medium frequency induction furnace.
分析了影响轧制过程中轧件板形的主要因素，介绍了安钢炉卷轧机生产线上采用的板形控制设备和轧制策略。
This paper analyzes the main reasons of influencing plate shape in rolling process, and introduces the plate shape control equipment and rolling strategy in Angang steckel mill production line.
讨论了正常熔化时间即断电前炉内状态对断电后钢液凝固和炉内温度变化的影响。
The effect of the initial state on the solidification process of liquid steel and the temperature changing inside furnace were discussed, respectively.
阐述中厚板推钢式加热炉施工中的重点、难点问题以及解决方法。
This paper introduces emphases, difficulty and countermeasure in the construction of pusher type continuous reheating furnace.
设计的初炼炉出钢成分及其出钢温度，为GH1040母材在VOD精炼过程中提供了所需要的热能。
The appropriate tapping temperature and composition, designed for primary melting GH1040 base metal in arc furnace, provide necessary energy for VOD refining.
与普碳钢或低合金钢厂电弧炉烟尘比较，不锈钢电弧炉烟尘含有更多的合金元素，但锌含量较低。
Comparison with EAF dust at carbon and low alloy steel works, the EAF dust at stainless steel works contains more alloy elements but zinc content is lower.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
每次推钢后通过计算机多次模拟钢坯在加热段和均热段内的加热过程，采用遗传算法选出最优的加热炉炉温和推钢时间。
The heating process inside the furnaces of the billets can be simulated multiply times by computes and best control parameters of the furnaces can be determined.
通过对比工艺流程和成本指标，指出在生产超低硫钢时，钢水炉外精炼深脱硫的必要性。
By comparisons of steelmaking processes and the cost indexes, it is concluded that deep desulphurization in steel refining is necessary for making ultra low sulfur steel.
对水平钢化炉内传动辊的温度场进行了数值模拟。
The temperature distribution of conveying roller in horizontal tempering furnace was simulated numerically.
一个炉号的钢水的其中一部分轧制为轧制结构钢产品，同炉号的其余部分钢水轧制为钢卷，每个部分分别进行试验。
Where part of a heat is rolled into an as-rolled structural product and the balance of the heat is rolled into coil, each part shall be tested separately.
将传统的炉喉钢砖改造为水冷炉喉钢砖，在高炉上应用后，避免了传统炉喉钢砖的弱点，取得了较好的效果。
The application of water-cooling throat steel-brick instead of traditional one can not only avoid the initial weakness but also obtain remarkable result.
将传统的炉喉钢砖改造为水冷炉喉钢砖，在高炉上应用后，避免了传统炉喉钢砖的弱点，取得了较好的效果。
The application of water-cooling throat steel-brick instead of traditional one can not only avoid the initial weakness but also obtain remarkable result.
应用推荐