给出了滤波多音调制系统的原型滤波器优化设计方法。
An optimal design method for the prototype filter design of the filtered multitone modulation system is proposed.
根据本文提出的优化设计算法，作者详细研究了FIR线性相位带通滤波器优化设计实例。
Author studies in detail the optimal design examples about the FIR band pass filters with a linear phase according to the optimal design algorithm presented in the paper.
针对伯恩斯坦多项式中参数的不确定性，提出了一种基于遗传算法的具有EBFB特征的小波滤波器优化设计方法。
Due to the uncertainty of parameters of the Bernstein polynomial, a design method for optimizing wavelet filter while maintaining the property of EBFB based on genetic algorithms is presented.
本文讨论了全数字接收机中插值滤波器的优化设计问题。
In this paper, the problem of optimal design of interpolation filter for all digital receiver is discussed.
给出了一种二维fir数字滤波器的优化设计方法。
An optimized method for the design of two-dimensional FIR digital filters is proposed.
而建模分析和优化综合是叠层ltcc滤波器设计的关键。
Modeling and analysis, optimization, and synthesis are the issues in design of LTCC filters.
为进一步提高无限冲击响应(IIR)数字滤波器的性能，提出了一种基于搜寻者优化算法(SOA)的IIR数字滤波器设计方法。
To further improve the performances of infinite impulse response (IIR) digital filters, a new approach based on the seeker optimization algorithm (SOA) was proposed for IIR digital filter design.
本文提出了一种设计等波纹线性相位FIR陷波滤波器的优化算法。
This paper presents an optimal algorithm for designing linear phase equiripple FIR notch filters.
该文基于半无穷维二次优化(SIQO)技术给出一个设计FIR数字滤波器的新方法。
This paper proposes a new method for the design of FIR filter by using semi infinite quadratic optimization (SIQO) techniques.
由此，抗混叠滤波器的设计能得到优化。
As a result, the design of anti-aliasing filters can be optimized.
层叠滤波器的优化设计是层叠滤波理论研究中最为关键的问题。
Optimizing stack filters is the most pivotal issue of the study of stack filters theory.
提出一种基于窗函数法设计FIR数字滤波器的优化算法。
A novel iterative algorithm for optimization design of non-frequency-selective FIR digital filters is proposed based on the windowing method.
本文提出并详细说明了用最优化方法设计线性相位数字滤波器的原理和方法。
The Principle and design methods for linear phase digital filter with optimization design were presented in this paper.
然后针对每个传感器，根据其各频率波束形成加权向量，采用约束优化方法，设计出具有要求幅度和相位响应的FIR滤波器。
Then, the BCBB is implemented by a set of FIR filters corresponding to the input channels, which provides the frequency response derived from BCBB weights for each sensor.
本文提出一种利用ZAK变换及优化的升余弦滚降滤波器设计的OFDM/OQAM系统时频局域优化脉冲成形滤波器。
The discrete ZAK transform and Raised cosine FIR filter are used to design time-frequency well-localized pulse shaping filters for OFDM/OQAM systems.
本文包括(1)伪互补滤波器的分析；(2)最优化设计方法；(3)计算结果举例。
This paper consists of (1) analysis of pseudo-Complementary filter, (2) optimization design method and (3) a design example.
本文介绍一种恒时延滤波器的最优化设计方法。
This paper introduces an optimal design method of constant-delay filter.
通过建立混合电力滤波器的容量优化模型，对其整体容量进行优化设计。
The whole capacity of the hybrid power filter is optimized by building up the optimization model of it.
为了获得电容最佳值，提出了一种简单的最优化方法；并采用寄生电阻预畸变与SC负电阻相结合的办法，设计的SC滤波器对寄生电容不灵敏，且电路简单。
The SC filter is insensitive to parasitic capacitance implemented by a simple circuit in the way of combining advance mutation of parasitic resistance and SC negative resistance.
介绍了平方根升余弦滚降数字滤波器的设计和优化方法，并提出了用FPGA实现其硬件电路的方案。
This paper introduces design, optimization and implementation with FPGA of square-root raised cosine roll-off digital filter.
基于峰值约束最小平方优化标准，提出了一种用于设计线性相位定点系数FIR数字滤波器的新方法。
A new method for designing linear phase FIR digital filter with fixed-point coefficients based on the peak-constrained least-squares criterion is proposed in this paper.
本文尝试将一种新的优化算法一人工鱼群算法(AFSA)用于IIR数字滤波器设计，建立了相应的优化模型，给出了简化的人工鱼群算法及其实现步骤。
Artificial fish swarm algorithm (AFSA) is a novel optimization algorithm proposed lately. A new method based on this optimization is proposed to design the IIR digital filters.
首先根据滤波器的低通原型设计、计算了滤波器的参数，并使用微波cad软件对设计的尺寸进行了优化、仿真。
First, the filter parameter is calculated with low pass prototype, then the parameter of the filter is optimized and simulated with microwave CAD software.
首先根据滤波器的低通原型设计、计算了滤波器的参数，并使用微波cad软件对设计的尺寸进行了优化、仿真。
First, the filter parameter is calculated with low pass prototype, then the parameter of the filter is optimized and simulated with microwave CAD software.
应用推荐