提高热变型温度和低温度冲击强度；
Raise heat distortion temperature and Raise anti-impact strength from low temperature.
在剧烈的环境温度冲击下，探测器也能正常工作。
The detectors can be operated properly even under strong impact of ambient temperature.
温度冲击试验；
抗恶劣环境计算机是否能够承受温度冲击直接影响着产品的可靠性。
Whether a severe environment computer can endure temperature shock affects directly the reliability of products.
对管接头进行了气密、爆破、低温、高温、温度冲击和振动试验。
The couplings have undergone extensive qualification tests, such as proof pressure and burst pressure at different temperature, thermal shock and vibration.
试验箱执行《温度冲击实验》(GJB150.5- 86)技术标准，可以满足温度冲击试验的需求。
The chamber obey "thermal shock test" (GJB150.5-86) technic standard, the thermal shock chamber can satisfy countryside exigent requirement.
红外瞄准镜环境温度冲击和不合理的温度变化将会诱发一系列的控制电路问题，如呈现局部过热，引起芯片结区烧毁；
Infrared Sight and unreasonable impact on the ambient temperature the temperature change will induce a series of control circuits such as rendering local overheating causing chip junction area burned;
环境数据，比如温度、湿度、冲击和震动。
Condition data, such as temperature, humidity, shock and vibration.
这个方法的中心思想就是，通过提高温度，向你的细胞提供热冲击，使他们变得对化学疗法和辐射更敏感。
The idea is that as you raise temperature, you induce a heat shock in cells, and that this makes them more susceptible to the damage caused by chemotherapy and radiation.
ArmorC12 convertible笔记本电脑具有印模压铸的镁合金外壳，已经通过了跌落冲击、潮湿、极端温度与防尘和抗振动测试。
Armor C12 convertible notebook has a die-cast magnesium alloy case, and has been tested for drop-shock, moisture, temperature extremes, and resistance to dust and vibration.
这种情况对飞行员来说很糟，因为螺旋桨的尖部接近声速(在海拔较低的温度下大约1200kph)，冲击波造成强烈震动。
And to make matters worse for the pilot, as the tips of the rotor blades approach the speed of sound (around 1,200kph at lower altitude temperatures), shock waves produce huge vibrations.
归纳解析器被认为比在恶劣工作涉及极端温度(220C)，高冲击，振动或肮脏的环境条件下的使用旋转编码器坚固。
Inductive resolvers are considered more rugged than rotary encoders for use in adverse operating conditions involving extreme temperature (up to 220 c), high shock, vibration or dirty environments.
提高热变型温度和代温冲击强度。
Impact heat distortion temperature and low; temperature impact strength.
下表列出了每个管道的最小设计温度，超过它的冲击测试不需要。
The following table lists the minimum design temperatures for each pipe size, above which charpy tests are not required.
计算结果表明：活塞在热冲击期间表现的温度及热应力的动力学效应是必须加以考虑的。
It was shown that the dynamic effect of the temperature and thermal stress of piston must be considered during thermal shock.
用冲击法测定塑料薄板的脆化温度的试验方法08。
Test Method for Brittleness Temperature of Plastic Sheeting by Impact 08.
冲击温度测量是物态方程及高压相变测量中的一项至关重要的课题。
Shock temperature measurement is a crucial subject in equation-of-state and high-pressure phase transition investigations.
研究了温度对聚氯乙烯PVC缺口冲击强度、断口形貌特征及断面粗糙度的影响。
The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.
阐述了试样尺寸，温度、湿度、缺口以及缺口加工方式等因素对塑料冲击强度测试结果的影响。
It expatiated the effects of the factors, such as sample size, temperature, humidity, notch and etc, on the result of the plastic impact strength test.
文中介绍了冲击温度的多波长光谱辐射测量方法。
The method of multiwavelength optical radiation measurements for shock temperatures is described.
提高热变型温度和低温冲击强度。
Improved heat distortion temperature and low temperature impact strength.
研究结果表明：高温热压后的板材吸湿性降低，尺寸稳定性好，但热压温度过高会产生木材热分解，冲击强度略有降低。
The results showed moisture adsorption of the platen dried veneer was lower and its dimensional stability was better, but its impact strength dropped when pressing temperature was too high.
研究了正火处理对FAS390Q桥壳钢显微组织、强度、冲击韧性和韧脆转变温度的影响。
The effect of normalizing on microstructure, strength, impact toughness and ductile-brittle transition temperature of FAS390Q axle housing steel was studied.
结果表明，随着时效温度的升高，冲击韧性呈下降趋势。
The results indicate that impact toughness of alloy will descend with ageing Treatment temperature increasing.
结果表明，美式落锤冲击试验受很多因素(如温度、试样尺寸和试样的成型工艺)影响。
The results showed that many factors influenced the American drop weight impact test, such as temperature, sample size and the moulding process of samples.
研究了温度对微孔发泡pp材料冲击性能的影响。
The effect of temperature on the impact property of cellular PP was studied.
而晃荡产生的冲击载荷压力使温度上升，会产生危险。
But the pressure from impacting loads caused by sloshing makes the liquid temperature rise and induces danger.
板材的玻璃化温度、拉伸强度、冲击强度和溶液黏度均随摩尔质量的增大而增大。
The glass transition temperature (T_g), tensile and impact strengths, and the solution viscosity of the PMMA plate increased with the increase of M_w.
本文研究了刚性粒子PS添加量、基体韧性、加工温度对PVC冲击强度的影响。
The study was made on the effects of the contents of rigid PS particles, the toughness of PVC and processing temperature on PVC impact strength.
本文研究了刚性粒子PS添加量、基体韧性、加工温度对PVC冲击强度的影响。
The study was made on the effects of the contents of rigid PS particles, the toughness of PVC and processing temperature on PVC impact strength.
应用推荐