讨论了几种因素对涂膜性能的影响。
The effects of these factors on the performance of moisture cured polyurethane were discussed.
讨论了主要组分的配比与涂膜性能的关系。
The relation between proportion of main components and film properties has been discussed.
介绍了成膜机理、涂膜性能、施工工艺及应用实例。
Film-forming mechanism, film performance, construction process and application are described.
讨论了工艺条件对醇酸树脂性质及涂膜性能的影响。
The influence of preparation technology on the properties of alkyd resin and coatings film is discussed.
研究了不同分散剂对PVDF分散性及涂膜性能的影响。
The influences of various dispersants on the dispersibility of PVDF have been studied .
粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。
The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating.
讨论了浸涂工艺施工参数、管理方式、涂膜性能及改进方向。
The application parameters, management, paint film performance and further improvement were also dis-cussed.
检测结果表明，涂膜性能较好，尤其是附着力得到很大改善。
Testing results show excellent performance, especially in adhesion of the coating.
乳胶色漆的颜色准确性和涂膜性能与基础乳胶漆的组成关系密切。
The color and film performance of emulsion paint are closely related with the composition of base paint.
为提高PUD涂膜性能，采用氮丙啶和聚碳化二亚胺对其进行交联改性。
In order to improve the performances of PUD film, the PUDs were crosslinked by aziridine derivatives and polycarbodiimide, respectively.
研究了涂料中颜基比、固化剂与环氧树脂的当量比等对涂膜性能的影响。
The influence of pigment to varnish base ratio and the ratio of epoxy resin to curing agent on film's performance were studied.
对涂料耐热机理作了初步探讨，着重介绍耐热粉末涂料配制和涂膜性能。
Based on the high - temperature resistance mechanism of powder coatings, the article is about the preparation and the properties of the powder coating with high - temperature resistance.
然后由该树脂配制了水性紫外光固化涂料，研究了固化工艺和涂膜性能。
The cured film of succinic anhydride modified epoxy acrylates resins has shining and excellent flexibility, and has wide application in future.
研究了镁合金的前处理、防腐涂装以及装饰性涂装工艺条件及其涂膜性能。
The process conditions of pretreatment, corrosion prevention coating, decorative coating and film's performance were studied.
探讨了单体配比、乳化剂配比、引发剂等对聚合反应以及涂膜性能的影响。
This article has discussed the influence of ratio of monomers, emulsifier mixing ratio and initiators on the polymerization reaction and the film properties.
本文合成了阳离子型丙烯酸树脂，研究了影响树脂水溶性和涂膜性能的因素。
This article has reported the preparation of a cationic acrylic resin and the factors that influence the water solubility of resin and coatings film performance.
有机硅组分的引入可以改善和提高粉末涂料涂膜性能，特别是耐候性及耐热性能。
The introduction of silicone composition to the powder coatings improves some properties and performance of the cured film especially in the thermal stability and weather resistance.
讨论了环氧树脂、固化剂、颜填料、溶剂、助剂、涂膜厚度等对涂膜性能的影响。
The influence of the epoxy resin, curing agent, pigments and fillers, solvents, additives, thickness of the coating film and et al on the performances thereof is discussed.
研究了玻璃微珠乳胶涂料成膜物的合成，叙述了各种因素对聚合物涂膜性能的影响。
Study was made of synthesis of film forming material for glass microballoon emulsion coating and influence of various factors on polymer film performance is described.
在制备亲水涂料的基础上，研究苯乙烯-二乙烯基苯树脂微粒对亲水涂膜性能的影响。
Starting from preparation of hydrophilic coating, a study was devoted to the effect of the fine grains of styrene divinylbenzene resin on the performance of hydrophilic film.
采用FTIR、SEM、TG和涂膜性能实验等对复合涂料的结构和性能进行了研究。
The structure and properties of the hybrid coatings were studied by FTIR spectroscopy, SEM, TG and test experiment of film performance.
介绍了干粉涂料的组成、分散和施工工艺，并比较了其与传统高pvc涂料的涂膜性能。
Components, dispersing process and applications of dry powder architectural paint are introduced, which is compared with the conventional high-PVC coatings on the film performances.
研究了树脂反应的酸值与反应条件的关系，并研究了不同光引发剂体系对涂膜性能的影响。
The relation between acid value and reaction time had been discussed. The influence of photoinitiator on properties of coating were discussed too.
通过改变HDI齐聚物合成反应的条件，探讨了齐聚物的组成和分子量对涂膜性能的影响。
The effects of the composition and molecular weight of the HDI oligomer on the properties of coating film were studied.
反应性微凝胶具有良好的施工性能、涂膜性能及耐久性能，主要用于涂料或对涂料进行改性。
Because of their excellent workability, outstanding durability and mechanical properties, reactive polymer microgels are extensively used as coatings or as coating-modifications.
研究了不同质量比的单体、自交联单体以及固化剂与树脂的不同配比对涂料涂膜性能的影响。
The influence of different mass ratio of monomers, self-crosslinking monomers and various ratio of curing agent and resin on coating film's properties were studied.
介绍了该涂料的配方和配制工艺。讨论了脲醛树脂用量和酸固化催化剂对涂膜性能的影响。
The formulation and production process of this coatings were given, and factors influencing the film properties, such as level of urea - formaldehyde resin and acid curing catalyst were discussed.
讨论了聚氨酯-丙烯酸酯的乳化机理，及其对环氧-丙烯酸酯水分散体系稳定性及涂膜性能的影响。
The emulsification mechanism of polyurethane-acrylate and its influence on stability of epoxy-acrylate aqueous dispersion and film properties are discussed.
系统研究了丙烯酸树脂分散体的玻璃化温度、分子量、羟基单体种类、羟值、酸值对涂膜性能的影响。
The effects of Tg, molecular weight, hydroxyl number, various hydroxyl monomers, acid number of acrylic dispersion on properties of films were studied systematically.
介绍了金属粉末涂料的主要品种、制造工艺、基本配方、影响涂膜性能的因素、应用领域和存在的问题。
Main varieties, production technology, basic formulations, influencing factors on coating film, application fields and existing problems for powder coatings containing aluminum powder are discussed.
应用推荐