挖掘过程中经暴露在空气中后，油漆下的涂层开始脱落。
After being exposed to air during digging, the coating under the paint began to fall off.
这些木质的桥面、干燥的海风和矫复层叠的油漆涂层，足可令些微星火变成万丈巨焰。
The wooden decks, the drying wind and the obsessive, repeated coats of paint feed enormous fires, still the main reason for their demise.
油漆的之间每个涂层应该有不同的颜色。
继续沉积，直到涂层厚度足够形成一个屏障以对抗进一步的油漆引力。
Deposition continues until the coating thickness becomes sufficient to form a barrier against further paint attraction.
使用松节油或松节油和亚麻子油的混合物，以确保您最初的油漆涂层薄。
Use turpentine or a mixture of turpentine and linseed oil to ensure that your initial coat of oil paint is thin.
它的抗腐蚀性要优于其它的油漆应用方法，因为沉浸式的电泳涂漆可提供完整均匀的涂层。
Corrosion resistance is superior to other paint application methods because immersion E-Coat provides a complete, uniform coating.
如果钢表面发生上述损坏，产生锈，用电力工具对表面进行清除，处理至二次表面处理等级，涂上一层与原始油漆一样的涂层。
When such damage comes to the surface of steel and rust occurs, the surface shall be cleaned by power tools to the secondary surface preparation grade and coated as originally painting scheme.
运用油漆的最小和最大涂层间隔应该参照油漆商的指导手册。
Minimum and maximum coating intervals of painting application shall reference to manufacture's guideline.
我要把原有的油漆全部铲去，并要涂上新的内涂层和上光剂。我要彻底地干一下，决不马马虎虎。
I want all the existing paint stripped off and new undercoat and gloss applied. I want a thorough job, with no half measures.
粉末涂层，油漆，搪瓷，塑料涂层或镀钢是典型的测量应用。
Powder coat, paint, enamel, plastic coatings or plating on steel are typical measurement applications.
钢材表面应无可见油脂、污垢、氧化皮、铁锈和油漆涂层及其它杂物应尽可能除去，任何附着物均应是牢靠的。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other debris should as far as possible eliminate, any attachments should be strong.
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层等附着物，该表面应显示均匀的金属色泽。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other attached objects, the surface should be showed homogeneous metal color.
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层附着物，任何残留痕迹应仅具点状或条纹状的轻微色斑。
Steel surface should be no visible oil, dirt, scale, rust and paint coating attachments, any markings should be only slight discoloration of dot or stripes.
试验前的准备工作包括腐蚀检查、机械检查、车辆拍照、涂层厚度测量、金属厚度识别及油漆层划线等。
The preparations before test shall include corrosion check, mechanical inspection, vehicle photo, coating thickness measurement, metal thickness identification, paint layer scratch and etc.
天然金属，不容易生锈，常用于油漆中的色料，金属涂层，塑料生产过程中的稳定剂，染料及电池内的电溶液．。
It is a naturally occurring and abundant metal that does not easily corrode (rust). It is often used for pigments metal coatings, plastics(as a heat stabilizer), photographic films and batteries.
使用压力方式或者速度方式的压痕对油漆涂层的机械性能进行测量的方法。
Mechanical Characterisation of Paint Coatings Using an Indenter with Force or Velocity Measurement!
钢材表面应无可见的油脂和污物，并且没有附着不牢的氧化皮、铁锈和油漆涂层及其它杂质（水溶性盐和焊接残渣）。
Steel surface should be no visible grease and dirt, and there is no attachment not firm scale, rust, paint and other impurities (water soluble salt and welding residue).
油漆质量，塑料，聚合物，荧光增白剂和磷涂层（椭圆偏振仪）
Paints quality, Plastics, Polymer, Optical Brighteners and Phosphor Coatings ( Ellipsometry )
它也可以用于任何油漆，粉末涂层或抛光金属产品在高品质的均匀完成是必要的。
It can also be used for any painted, powder coated or polished metal product where a high quality homogeneous finish is required.
甲基丙烯酸甲酯（MMA）是生产有机玻璃的原料，广泛用于表面涂层、合成树脂、油漆涂料、胶粘剂工业和医用高分子材料工业。
Methyl methacrylate(MMA)is used as raw material for producing polymethacrylate, and it is also widely used in surface coating, synthetic resins, paint and coatings, adhesives and medical products.
幻想的测量非磁性涂层，如油漆，搪瓷，电镀，热浸镀锌钢。
Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
使用两个大衣黑色油漆涂层内部的烘烤厅。
Use two coats of black paint to coat the inside of the baking chamber.
丙烯酸油漆平整度相容性挖掘保持干燥，要清除浮尘、旧涂层等，且达到一定的平整度和粗糙度。
Keep dry, to remove the dust, the old coating, and achieve a certain flatness and roughness.
我要把原有的油漆全部铲去，并要涂上新的内涂层和上光剂。
I want all the existing paint stripped off and new undercoat and gloss applied.
油漆、腊克和合成涂层在铁或钢上。
油漆、腊克和合成涂层在铁或钢上。
应用推荐