Misteli说基因激活需要在其他时候测量，自我组织的计算机模型是最基本的。
Misteli said that gene activation needs to be measured at other times, and that the computational model of self-organization was relatively rudimentary.
鉴于基本模型自身的特点，作为对它的补充，文中又提出了系统测量的RBFNN模型，系统测试的结果证实了这种模型的有效性。
In the view of characteristics of basic model, the article gives RBFNN model for system measurement as supplement to the former, the result of test for RBFNN approves that the model is effective.
由结构光测量系统的基本原理出发，建立系统的数学模型，并对系统设计参数进行讨论。
According to the system principle, we construct system mathematics model, at the same time we discuss the system parameters.
阐述了位移测量反演分析的基本思路、解算模型、成果检验等，并用计算实例说明了其有效性。
The basic notion, computing model and result verification, etc, of displacement measurement inversion analysis are expounded. The example of calculation shows its validity.
方法实验采用了双积分球系统和光辐射测量技术的基本原理以及运用生物组织的光学模型。
Methods a double-integrating-spheres system, basic principle of measuring technology of light radiation and biological tissues optical model were used for the study.
从传热学角度分析套管温度计测量流体温度的物理模型，并阐述了其测温基本原理。
A physical model for measuring temperature of fluid by thermometer with Metal-tube is analyzed from heat transfer and its basic principle of measurement illustrated.
正演模型用来确定电磁测井测量的基本响应，和主要由实验室确定响应的核磁共振测量不同。
Forward modeling is used to determine the general response of most electromagnetic logging measurements, unlike nuclear measurements whose response is determined mainly in laboratory experiments.
如何根据作品的基本现象，测量这种变化，是感知模型要解决的问题。
According to the work basic phenomenon to survey this kind of change, is should be solved for the perceptual model.
其基本环节有：模型表面空间坐标数据测量、数据预处理、重构曲面模型、数字模型输出。
Its basic step includes: data measure of model surface, points pretreatment, reconstruction surface model, and the digital model export.
论述了计算机测控技术研制成功的叠加式称重测试系统的基本原理、测量数学模型和其实现方法。
Fundamental principle, test mathematical module and implementation method are discussed based on nestification weigh testing system by using computer test and control technology.
本文论述了以地面离散的测量数据通过建立点质量模型的方法求解物理大地测量边值问题的基本原理。
This paper describes the basic principle of solving the boundary value problem in physical geodesy by establishing the point-mass model with scattered measurements on the earth's surface.
模型化测量(MBM)是近年来提出的一种新的测量方法。本文介绍它的概念及基本内容，并举例说明。
Model Based measurement (MBM) is a new concept of measurement developed in recent years. This paper introduces its concept, basic contents and application examples.
灰色模型实时误差预报修正的动态测量误差序列同样为随机过程，也具有上述基本特性。
The series of dynamic measuring errors of the predicting correction of real-time errors of gray model is also a random process and has these four basic characteristics.
对栅式测量的基本方法—鉴相法进行了静态测量和动态测量的数学模型分析。
It was carried on analysis the Phase Demodulation mathematics models of the Columnsyn static measure and Columnsyn dynamic measure, that is one of the basic methods of the grid type measure.
利用位置传感的光电信号模型，分析了光学传感器位置测量精度的基本限制。
The basic limit for the position measuring was analyzed with the photoelectric signal model.
在陆地重力测量基本原理及其布点设计原则的基础上，建立了结合高程信息自动化布点的数学模型。
The mathematic model of automatic arranging points using height data is established based on principles of land gravity surveying and design strategy of arranging points.
解析法是摄影测量学、数字摄影测量与遥感影像纠正处理的基础理论和基本数学模型。
Analytical methods are the fundamental theories and mathematic models of photogrammetry, digital photometry and correction processing of remote sensing image.
本文首先在介绍了三种教育测量理论的基础上，较详细地论述了项目反应理论的基本原理、模型、参数估计以及信息函数等。
In the thesis, the basic principle, model, parameter estimation and information function of IRT are discussed based on three education test theories.
详细介绍了短程飞行时间吸收谱测量冷原子温度的基本模型和实验方法。
The basic model and the experimental measurement method of short-distance time-of-flight absorption spectra for determining the temperature of cold atoms are described.
刀口法是测量光学系统的传递函数一种基本方法，通过对刀口边缘误差建立数学模型，讨论刀口误差对光学传递函数测量精度的影响。
Using a knife edge to measure the MTF of optical system is a basic way. The paper discusses the influence of slit edge error on MTF by building a mathematical model.
叙述了分别采用五孔探针、热线和激光三种流场测量方法测量旋流器模型内的流场分布情况，并得出基本一致的实验结果，从而为旋流发生器的设计提供理论依据。
In this paper the flow field in swirler is measured by five-hole probe, hotwire and LDA. These results could be much the same. It can provide some ideas for design of swirler.
在阐述叠加莫尔方法测量物体三维形貌基本原理的基础上，导出正弦光栅照射法等高莫尔条纹检测的数学模型。
On the base of expatiating the theory of object 3-d topography measurement with the overlapping moir? Approach, this paper derives the mathematic model for obtaining the contouring moir? Fringe.
确定高精度和高分辨率地球重力场模型是现代大地测量的基本目标之一，卫星重力计划就是基于这一目标实施的。
One of the fundamental scientific objectives of modern geodesy is to determine the high precision and high resolution earth gravity field. The satellite gravity project is just for this object.
该模型预测的结果与铣削试验的测量结果基本吻合。
The predict result of the model is agreed with the measuring result of the milling experiments.
该模型对磨屑破碎过程和分布的描述和预测基本不受测量仪器分辨率和取样长度的影响，因而比传统基于统计分析的模型更为合理和有效。
The multiple fractal model can describe and prognosticate the wear particles fragmentizing and distribution more reasonably and effectively than traditional models based on statistics.
本文重点分析了数字摄影测量的基本原理，结合数字摄影的成像模型，严格推导了摄影测量学中的共线方程。
This article focuses on the analysis of basic principles of digital photogrammetry, combined with digital photography imaging model, strictly derived photogrammetry in the total line equation.
将最终数值模拟结果和实验测量数据进行了比较，结果表明文中构建的综合模型基本上是正确和可行的。
The numerical results of the model were compared with the data from the experiments. The comparison shows that the model is basically correct and feasible.
将最终数值模拟结果和实验测量数据进行了比较，结果表明文中构建的综合模型基本上是正确和可行的。
The numerical results of the model were compared with the data from the experiments. The comparison shows that the model is basically correct and feasible.
应用推荐