其次介绍了注塑模流动模拟理论，建立了流动过程的数学模型。
Second, flow simulation theory of injection plastic mould is introduced, math model of flow is established.
在此基础上，引入流体流动模拟分析技术，研究了油气运移方向。
Fluid flow simulation analysis technology is introduced to study the direction of hydrocarbon migration.
岩心酸化流动模拟试验是室内筛选评价工作液体系和注液程序的有效方法。
Core flow simulation test is a kind of effective method to screen out and evaluate the working fluid system and operational procedure.
利用流动模拟结果，在流道布置及浇口尺寸确定后对分流道尺寸进行优化。
After the runner layout and gate size were decided, it could adjust runner size iteratively based on the of flow simulation results.
本文主要进行可变式进气歧管的三维曲面重建和空气流动模拟分析的研究。
This thesis mainly carries on research of three dimensional surface reconstruction of variable intake manifold and air fluid simulation analysis.
通过不同粘度流体的岩心流动模拟实验，揭示粘度变化对流体渗流及开发效果的影响。
The influence of viscosity change on fluid percolation and development response is revealed through core flow test with fluids of different viscosity.
应用三维流动模拟软件HSCAE3D6 0对冰箱定位板注塑模的浇注系统进行优化。
A 3d flowing simulation software HSCAE3D6.0 was applied to optimizing the pouring system of positioned panel injection-mould.
口模-流动模拟也被成功用于研究口模出口处出现的应力，以及评价口模-出口几何的变化。
Die-flow modeling has also been used successfully to study the stresses occurring at the die exit and to evaluate changes in die-exit geometry.
介绍了粉末注射成形充模流动模拟所采用的数值计算方法，展望了该技术的发展趋势和方向。
The numerical methods in the simulation of mold filling process are introduced. The main trends and directions are proposed.
研究了注塑成型过程中CAD模型向CAE模型转换的方法和网格生成技术对注塑流动模拟的影响。
In this paper, the influence of the mesh generation method on injection molding simulating during the transition course of CAD model to CAE model is analyzed.
提出了一种适用于具有复杂海底边界的自由表面流动模拟算法？基于非结构化四边形网格的VOF法。
A novel VOF method based on unstructured quadrilateral mesh for free surface flows with complex seabed boundaries is presented.
应用国产三维流动模拟软件HSCAE3drf对海尔空调前面板的注射模具结构及工艺进行优化。
A homemade 3d filling simulation package-HSCAE 3drf was applied to optimize the mold structure and process of the front-board of Haier's net-air-condition.
综述了目前用于粉末注射成形充模流动模拟所采用的理论模型及其应用研究现状，并对各自的优缺点进行了分析。
The theoretical model and research status of the simulation of powder injection molding filling process are reviewed. Their merits and demerits are analyzed and compared.
文中概括了近年来焊接熔池传热与流体流动模拟所取得的一些进展，总结了影响熔池传热和流体流动的一些主要因素。
In this paper, some progress attained in recent years on heat transfer and fluid flow in weld pool was summarized, then generalized the factors that influenced heat transfer and fluid flow greatly.
论述了气辅流动模拟需解决的主要问题，例如气辅模拟中不同参数对成型的影响、预测缺陷、指导工艺及模具设计等。
This paper presents several numerical simulation methods to solve control equations on the effects of velocity, pressure and temperature fields.
利用开发的红外透射法粉体浓度计算机测定系统，在高炉氧煤喷吹气-固两相流动模拟装置上测定了氧煤枪的煤粉浓度场。
The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.
而剔除STL面片数据中的冗余顶点是重构的关键，该算法已经成功应用于三维真实感注塑模流动模拟软件的3d图形处理。
Filter the redundancy vertex in STL solid is very important. The algorithm is successful to deal with 3d graphic in realistic mold flow simulation software.
使用新算法，科学家们能够模拟全球地幔流动以及它是如何显明板块构造和断层移动的。
With the new algorithms, the scientists were able tosimulate global mantle flow and how it manifests as plate tectonics and themotion of individual faults.
他们通过模拟交通流量入手，把它当成流动的河流，同时把十字路口比作纵横交错的管网。
They started by modeling traffic as if it were a fluid, comparing intersections to a network of pipes.
数值模拟是解决复杂区域的流动和换热问题的一个行之有效的方法。
Numerical simulation is a effective method for solving problems of fluid flow and heat transfer in complex geometries.
应用有限容积法对发动机排气管系中的气体流动作模拟计算。
FVM method was applied to simulate the unsteady gas flow in manifold of diesel engine.
对不同入口气体速度、初始颗粒尺寸分布和不同颗粒团聚形成机理下收集器内颗粒聚团流动的流体动力特性进行数值模拟。
The hydrodynamics of particle agglomeration flow was numerically simulated at the different inlet gas velocity, initial particle size distribution and type of agglomeration mechanisms in the absorber.
在选择区域范围内根据油藏横截面模拟模型能进一步确认流动单位校正模型。
The revised model based on flow units was further validated by cross-sectional reservoir simulation models in selected areas of the field.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
提出了数值模拟稠密气固两相流动的多重格子-真实轨道模型（MLAT模型）。
To simulate the cluster formation in dense two-phase flow, a multi-lattice actual trajectory (MLAT) model is developed.
酸液在井筒和裂缝流动时的温度场和速度场模拟是进行酸液就地性能参数计算的前提。
The temperature field of acid flowing in the borehole and the fracture is the basis for calculating the in-situ parameters.
转移系数——一个用于模拟污染物流动的系数。
Transfer coefficient — a coefficient used in simulating pollutant flows.
模拟显示微聚体，可以随着液体的流动通过表面，能自动的聚集在损伤部位。
The simulations show that microcapsules, travelling across a surface within the flow of a liquid, should naturally cluster around points of damage.
经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
应用推荐