本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
磁盘驱动器的设计者可以利用ANSYSFSI进行双向耦合流体结构仿真，该软件具备在单一的模拟环境下优化设备的能力。
Disk drive designers use ANSYS FSI solutions to conduct two-way coupled fluid-structure simulation, which provides the ability to optimize devices in a single simulation environment.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
利用FLUENT软件的流体流动和传热问题的微观模拟功能，找到换热器内部的温度分布。
And it also makes use of the microscope simulation ability of FLUENT software on liquid flow and conduct heat.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
以现场数据为基础，利用计算流体力学软件FLUENT6.3为计算平台对焙烧炉进行了数值模拟研究。
Based on the field data, numerical simulation of the baking furnace is carried out using computational fluid dynamics software FLUENT6.3 for the computing platform.
基于经典波浪理论，以大型商业计算流体力学软件CFX为平台，可以实现数值造波及波物作用的模拟计算。
Based on the principle of wave, the simulation of wave generator and wave or wave-current forces on circular cylinder is presented by using CFX.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
运用流体力学仿真软件对传感器排水罩的排水效果进行了流场模拟，验证了排水罩结构设计的可行性。
The flow field of the drainage cover of the sensor was simulated by using a fluid mechanics simulation software, the feasibility of drainage cover structure design was validated.
第二部分用STAR - CD流体软件对可变式进气歧管进行空气流动数值模拟分析。
The second part carries on the air fluid simulation analysis of variable intake manifold with the STAR-CD fluid software.
采用大型计算流体软件FLUENT 6.1进行计算，模拟并分析了氧化沟沟内的混合液流场及污泥分布。
By computing through the comprehensive CFD software, FLUENT 6.1, the flow field of mixture flow and the sludge distribution is simulated and analyzed.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
使用计算流体力学软件FLUENT，模拟均匀来流绕固定圆柱的流动，模拟雷诺数为20,40,100时的绕流流动，得到流场的流函数等值线图和速度矢量图。
Uniform flow around a mounting cylinder is simulated with the application of FLUENT software while Reynolds number is 20, 40,100. Stream function and velocity vector distributions are indicated.
利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。
The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
采用FLUENT计算流体力学软件对糖化锅内的流场进行了模拟。
The inside field of the mash kettle is imitated with FLUENT software.
利用计算流体力学通用软件FLUENT对整体流场和定转子间隙区流场中周向流速度场进行了数值模拟，并对理论分析进行了补充。
The field of whole flow field and tangential velocity between stator and rotor were imitated based on FLUENT. The analysis in theory was replenished.
本文使用计算流体力学软件FLUENT对二维平面上转子对壁面液膜的刮擦过程进行模拟。
Thirdly, CFD software FLUENT was applied to simulate the wiping process by rotor on the evaporating wall in two-dimension plane.
利用计算流体力学软件对煤油在所设计的双模态超声速燃烧室内的超声速喷雾燃烧进行了数值模拟。
Numerical analysis of the kerosene spray supersonic combustion was carried out in the dual-mode supersonic combustor with the CFD software.
本文运用商用流体动力学软件CF X数值模拟了非加热区对窄缝流道内流场和温场的影响。
With the commercial computational fluid dynamics code CFX, the effect of unheated region of narrow side on flow field and temperature field of a narrow channel is simulated in this paper.
利用大型计算流体软件——FLUENT对熔体直通气体发泡法过程进行模拟。
Also FLUENT, which is the large scale CFD software, has been applied to imitate the foaming process of aluminum melt.
采用零方程模型和3点动量风口模型，应用计算流体力学软件PHOENICS模拟了某候机厅空调气流组织方案的速度场和温度场。
Simulates the air distribution in an air conditioned airport ball by PHOENICS using zero equation turbulent model and three point momentum draught model.
在模拟气流分布板时，利用计算流体动力学软件中的多孔介质模型是一种有效的方法。
Used porous medium porous Jump Boundary Conditions of hydrodynamics in simulating the gas distribution screen.
使用流体力学分析软件对减压溢流阀在阀口不同开度条件下进行了阀内流场的数值模拟和仿真；
Using fluid dynamics analysis software CFD made a numerical simulation to the BOP control system pressure relief valve under the valve different working conditions;
引入了轴向循环流动的概念，且利用ANSYS有限元分析软件对非啮合双螺杆挤出机轴向循环流道中的非牛顿流体等温流动进行了三维模拟分析。
Axial circle flow was introduced. The isothermal flow analysis of non-Newtonian fluid in axial circle region of a non-intermeshing counter-rotating twin-screw extruder was concerned.
引入了轴向循环流动的概念，且利用ANSYS有限元分析软件对非啮合双螺杆挤出机轴向循环流道中的非牛顿流体等温流动进行了三维模拟分析。
Axial circle flow was introduced. The isothermal flow analysis of non-Newtonian fluid in axial circle region of a non-intermeshing counter-rotating twin-screw extruder was concerned.
应用推荐