以植物油、TDI为主要原料合成氨酯油，中和后加入水分散得水性氨酯油溶液。
Oil-modified urethanes is prepared with vegetable oil and TDI as main materials, which is then neutralized to form the waterborne oil-modified urethanes.
方法将糖尿病大鼠分为3大组：空白组：糖尿病大鼠4只，口服不含胰岛素的油溶液；
Rats with diabetes were divided into 3 groups: 4 diabetic rats took orally negative oily solution without insulin in blank group;
石油溶液是以沥青质为胶束中心，胶质为溶剂化层，瓦斯油分为分散介质的胶体分散体系。
The petroleum solution is a colloidal dispersion in which the asphaltene comprises the micellar nucleus, the resin forms the solvation layer and the remaining gas oil ACTS as the dispersing medium.
采用天然高分子物质壳聚糖、 海藻酸钠为壁材，无色染料油溶液为芯材，通过复合凝聚法制备纸用微囊。
The microcapsule used for paper was prepared using nature macromolecule material sodium alginate and chitosan as wall and a colorless dye oil as core by complex-coacervation.
但油田使用的聚合物抗盐性能比较差，因此配制聚合物驱油溶液用水必须经过严格处理，这样增大了处理的综合费用。
However, because of the poor salt resistance of the polymer, the mixing water has to be treated, thus causing the increase of the total cost.
在适当的无菌容器中收集冲洗液，并按照适合的关于水性溶液或油和油性溶液的规定，继续进行。
Collect the fluids in an appropriate sterile vessel, and proceed as directed for Aqueous Solutions or Oils and Oily Solutions, whichever applies.
化学除油：在碱性溶液中借助皂化作用和乳化作用清除制件表面油污的过程。
The chemical oil: in the alkaline solution with the role of saponification and the emulsification cleared surface process of oil parts.
尽可能迅速地过滤，并按照上面针对油和油性溶液所述内容继续操作。
Filter as rapidly as possible, and proceed as described above for Oils and Oily Solutions.
用这两种聚合物溶液在不同的浓度和注入速度条件下进行了驱油实验。
The oil displacement experiments with two types of polymers were carried out under the conditions of various concentrations and injecting speeds.
为保证聚驱效果，聚合物驱油过程中一般采用低矿化度清水配制聚合物溶液。
To ensure the effect of polymer flooding, polymer flooding process generally use low salinity water for preparation of polymer solution.
按照适合的关于水性溶液或油和油性溶液的规定，继续操作。
Proceed as directed for Aqueous Solutions or Oils and Oily Solutions, whichever applies.
电解除油：在含碱溶液中，以制件作为阳极或阴极，在电流作用下，清除制件表面油污的过程。
Electric lift oil: containing alkali solution in to parts used as an anode or the cathode, in the current function, remove the process of surface oil parts.
聚合物溶液在模型高渗透层内提高驱油效率作用的效果要好于中、低渗透层。
The effect of polymer solution on improvement of oil-displacement efficiency in high permeability layer is better than the effects in medium and low permeability layer.
阐述了采用溶液聚合和乳液聚合合成含氟共聚物的方法，探讨了含氟整理剂防水、防油、防污的作用机理。
The solution copolymerization, emulsion copolymerization, and mechanism of waterproof, oilproof and antisoil of fluorine containing finishing agents are discussed.
本文采用数值模拟并结合物理模拟两种手段对生物聚台物溶液中悬浮微粒的驱油渗流动态进行了探讨。
By means of physical and numerical simulation, this paper studies the kinetic process of oil displacement by suspended particles in biopolymer solution.
分析认为，水处理剂严重破坏AP - P4溶液的网状结构，是导致其流度控制能力和驱油效果下降的根本原因。
That water treatment agent have seriously damage to the AP-P4 solution's network structure is the root cause of mobility control ability and oil displacing efficiency's decline.
通过试验证明，低矿化度清水脱氧与否对聚合物溶液粘度及驱油效果没有明显影响。
The tests show that there is no clear effect to the viscosity of polymer solution whether the water deoxidizes or not.
将油酸酰氯和谷氨酸在碱性溶液中反应制备了N-油酰基谷氨酸。
N-oleoylglutamic acid was prepared from glutamic acid and oleoyl chloride in alkali solution and its structure was characterized by IR.
在聚合物驱油过程中，聚合物溶液的粘度和粘弹性对提高驱油效率起到了至关重要的作用。
In the process of displacement of oil by polymer solution, the viscosity and viscoelasticity of polymer solution are vital to displacement efficiency.
一加仑集中可生成20加仑的5%溶液，因此实际上水基液压流体的费用可以比油基的每加仑少30分。
One gallon of concentrate can make 20 gallons of a 5% solution, so the cost of water-based hydraulic fluid actually can be less than 30 cents per gallon.
聚合物分子量和溶液浓度参数设计，是决定聚合物驱油能否成功的关键，尤其是分子量和溶液浓度。
Polymer molecular weight and solution concentration parameter design are the key to decide whether the polymer flooding is successful or not.
电加热管可广泛应用于加热水、油、空气、硝盐溶液、酸溶液、碱溶液和低溶点金属(铝、锌、锡、巴氏合金)。
Electric heating pipe can be widely used in heating water, oil, air, nitrate solution, acid solution, alkali solution and low melting point metal (aluminum, zinc, tin, Babbitt).
工业用途：溶于水、碱水溶液、氨和纤维素溶液，不溶于有机溶液、矿物油的无色无定型物。
Industrial application: soluble in water, aqueous alkali, ammonia and cellulose solution, colorless and insoluble in organic solution, mineral oil amorphous substance.
通过物理模拟方法，研究杏北油田二类油层聚合物相对分子质量、注入速度、段塞大小、聚合物溶液黏度、不同注聚方式对驱油效果的影响。
Researches have been carried out in the second reservoir by physical modeling method to find out the formula weight of the polymer, injection rate, slug size and viscosity of the polymer solution.
通过聚合物溶液在不同模型中的驱油实验，研究了聚合物溶液的衰竭层效应和粘弹性效应对驱油效率和波及系数的作用机理和作用程度。
The mechanism and the extent of action of polymer solution's depleted layer effect and viscoelastic effect on displacement efficiency and sweep coefficient.
最常见的淬火介质有水溶液、聚合物溶液和矿物油。
The most common quenchants are water aqueous, polymer solutions and mineral oil.
以百里酚兰为指示剂，用氢氧化钠标准滴定溶液测定植物油中游离脂肪酸。
To determine the free fatty ac id in vegetable oil with NaOH's standard titration solution, using Thymol Blue as its indicator.
对显微镜物镜浸油与媒质水溶液折射率不同所产生的球差对光阱力的影响进行了定量计算与数值分析。
Effects of spherical aberration caused by the refractive mismatch between objective oil and medium water on optical trapping force is calculated quantitatively and also analyzed.
用甲醇对油样中l -抗坏血酸棕榈酸酯进行提取，对提取物在酸性条件下水解，用水解产物对2,6 -二氯酚靛酚钠溶液进行滴定。
L-ascorbyl palmitate in the methanol extract is hydrolyzed under acid condition, and 2, 6-dichlorophenol indophenol sodium solution is titrated with the hydrolysate.
利用国产露头砂岩岩心，研究了亲水条件下，无机盐对岩心采用表面活性剂溶液进行自发渗吸驱油的规律和采收率的影响。
The effect of inorganic salt on spontaneous imbibition and recovery factor of surfactant flooding has been studied under water-wet condition with outcrop sandstone cores.
应用推荐