米乐气模是一家集研发、生产、销售于一体的充气制品公司。
MELE Inflatable, which a company collect the development, production and sale in a body.
用时可通过气嘴对气模框架充气，然后由固定销将气模足球架固定在草坪上。
When the utility model is used, the air die frame can be inflated through an air nozzle, and then, the air die football shelf is fixed on the lawn by the fixed pins.
杭州宏成气模有限公司是一家致力于大型广告充气模型设计与生产的专业化公司。
Hangzhou Wang gas Die co., Ltd. is committed to a large advertising inflatable model design and production of specialized companies.
记者在活动现场看到，充气拱门、气模、红灯笼等让美食节充满了吉祥、喜庆、热闹的氛围。
Reporters in the activity at the site, inflatable arch, see model gas, red lantern etc make food festival full of good fortune, joy and lively atmosphere.
透明塑料盒盖注射模采用点浇口进料，脱模机构采用推板推出时，增设引气辅助推出机构，可确保制件顺利脱模。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
提出熔敷焊接工艺方法，采用等离子弧、TIG电弧、高频感应、气保护连续炉、真空炉和模中熔铸工艺实现了熔敷焊接工艺方法。
Re melt deposit welding process is proposed in this paper. To realize the technology, plasma arc, TIG arc, high frequency induction, gas shield continuous stove and MSW are adopted.
文摘：对消失模铸造铸铁件流动前沿的气隙进行了研究，探讨了气隙与坍塌缺陷的相互关系。
Abstract: in this paper the gas gap in the expendable pattern casting process was studied and the relation between the gas gap and collapse defect is discussed.
对消失模铸造铸铁件流动前沿的气隙进行了研究，探讨了气隙与坍塌缺陷的相互关系。
In this paper the gas gap in the expendable pattern casting process was studied and the relation between the gas gap and collapse defect is discussed.
依据冷态相似模化的原理搭建气固两相流冷态实验台，利用试验台分别对原有旋流燃烧器模型和3种改进的燃烧器模型进行气相试验。
According to the principle of cold conditions similar, air firm two-phase flow experiment of cold conditions is built, testing the original burner model and 3 kinds of improvement test model.
在相似理论的指导下，通过对比分析氮气和天然气的物性，对液氮模拟液化天然气汽车冷能回收系统进行了相似模化分析。
Based on the theory of similarity, similar modeling analysis of the liquid nitrogen simulative cold energy recovery system of LNG is conducted.
介绍黄铜合金锻造中的一些基本要求，并具体介绍了气瓶阀阀体多向模段工艺及模具。
Die forging process in several directions and forging die of the gas hottle valve are also presented concretely in this paper.
根据铝合金进气接管外形尺寸与结构等特点，该模具宜设计成一模一腔。
The die with one mould and one cavity was designed based on the geometry size and structure of the components.
在建立催化剂的小型流化床热模试验装置的基础上，考察了原料气配比及反应温度对主、副反应效果的影响。
The effects of feed ratio and temperature on the main and side reactions were investigated in a hot model test, using a 28mm fluidized bed.
模框和底板的强度及平整度要求很高，达不到质量标准的模框和底板直接影响加气混凝土生产的成品率。
Mold frame and floor flatness requirements of strength and high quality standards reach the bottom of the mold box and a direct impact on the production of aerated concrete yield.
根据川西南威远气田大水量气井现场测试数据，建立了举升油管和油套环空气液两相流压降优化模型。将油管内的持液率模化为气相、液相无因次速度和液相无因次粘度的函数；
An optimal model is proposed for predicting the pressure drop of two-phase flow in gas well tubing and annulus, based on the measured data from the gas field of southwest Sichuan, China.
气辅注塑家具的加工方法是：①塑料注射，熔 融的塑料注入模具型腔，熔融热塑料遇到温度较低的模壁在周围形成薄 壁凝固层；
The production process of the inflation aided injection molded furniture includes the following steps: 1. injecting molten plastic into mold cavity to form thin wall solidified layer at the mold wall;
烟道内气-固两相流模化工作的需要日益广泛，目前该领域所用模化方法尚欠妥当。
The demand for modelling the gas-solid two-phase flow in smoke flue is ever-increasing. However, the present-day modelling approaches are far from satisfactory.
烟道内气-固两相流模化工作的需要日益广泛，目前该领域所用模化方法尚欠妥当。
The demand for modelling the gas-solid two-phase flow in smoke flue is ever-increasing. However, the present-day modelling approaches are far from satisfactory.
应用推荐