基于自稳定次元分析学习规则，提出一种添加了惩罚项的次元分析(MCA)学习规则。
A minor component analysis (MCA) learning rule is presented which includes a penalty term on the self-stabilizing MCA learning rule.
本文分析了这两种因素影响测向系统性能的机制，提出了一种可一次性补偿接收通道的幅相失配和阵元间互耦的有效方案。
In this paper, the mechanism of performance degradation due to above mentioned factors is analysed, and an effective method of compensation for channel mismatching and mutual coupling is proposed.
通过对四种二次曲线截面的柔性铰链的理论计算和有限元分析，比较分析了它们的力学特性。
Theory calculate and finite element method to symmetric conic-section flexure hinges is used to compare and analyze their dynamics characteristic.
采用回归分析法，得出描述丙烯腈中过氧化物含量与聚丙烯腈纤维黄度之间关系的一元一次线性回归方程。
The linear regression equation on the relationship between peroxide content in acrylonitrile and PAN fiber yellowness was obtained by regression analysis.
利用塑性极限分析和非线性有限元分析方法计算并验证了结构在考虑次内力作用时的极限荷载。
Based on plastic analysis and non-linear finite element analysis, the structure's load-bearing capacity under secondary internal forces is calculated and certified.
基于ANSYS提供的二次开发工具APDL，开发钢筋混凝土柱有限元参数化分析技术，能够大大提高钢筋混凝土梁分析效率。
A new kind of finite element parametric analysis technology for the reinforced concrete column is developed based on APDL which is a secondary development tool provided by ANSYS.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
本文用高次有限元法分析了任意形状槽波导的色散和损耗特性。
The dispersion and loss characteristics of groove guide with arbitrary shapes are analyzed with high-order finite element method.
应用有限元分析软件，对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
用有限元传递矩阵法分析火炮身管固有振动特性，矩阵阶次低，计算所得的固有频率与实际固有频率接近，误差在允许的范围内。
Matrix step is low by using the finite element transfer matrix method. Natural frequency by calculation approaches to actual natural frequency and the error is allowable.
基于通用有限元软件和地基阻抗力时域差分形式，完成了考虑土–结构动力相互作用影响的结构时程分析程序二次开发。
By use of general FEM software and the time-domain difference of ground resistance, the structure history analysis programs with consideration of soil-structure dynamic interaction was developed.
多项式回归分析表明，花粉可育率对特效烯浓度和播期的反应是二元二次方程。
Polynomial regression analysis indicated that the reaction of fertile pollen rates to tetcyclacis concentrations and dates showed a quadratic relationship.
将ANSYS的二次开发语言APDL与VC相结合，开发门式启闭机门架结构的参数化有限元分析系统。
Combining APDL in ANSYS with VC, the parameterized finite element analysis system of the hydraulic gate hoist structure is developed.
采用二次多项式逐步回归分析法建立了三元不对称有机磷酸酯类杀虫剂的多元非线性构效关系回归模型。
Nonlinear multiple regression model on the structure activity relationship of ternary dissymmetric organic phosphate insecticide is obtained by quadratic polynomial stepwise regression method.
以通用有限元分析软件A NSYS作为二次开发平台，开发了面向渗碳材料的涡流测试系统。
Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.
二次开发了参数化曲轴滚压加工残余变形的有限元分析。
It has developed the parametric residual deforming FEA in crankshaft rolling process.
本课题采用有限元分析方法研究非线性脉搏波在S型血管中的速度波，二次流。
In the research work, finite element analyses is adopted to study the velocity wave and the secondary flow of nonlinear pulsatile flow in the S-shaped curved arteries.
利用梁单元和实体单元各自的优点，通过二次建模互补进行结构有限元分析。
The respective virtues of beam element and solid element are shown in two modelings.
用蒙特卡罗法和有限元相结合方法对加氢精制反应器模型进行5000次抽样，并对其可靠性和灵敏性进行分析。
The reliability and sensitivity of The hydrogenation refined reactor were analyzed through 5000 samples Monte-carlo and finite element method.
采用三维热机耦合有限元模型和静力隐式算法，对多道次连轧稳态轧制过程进行模拟分析。
Marc, this paper deals with modeling of steady deformation process in multi-pass continuous rolling process with a 3D thermo-mechanical coupled FE model and static implicit algorithm.
将在地质方面常用的二元二次趋势面问题，推广到P元Q次超趋势面，并分析了其中的原理和计算方法。
P-variate Q-time hyper-trend surface method is derived on the basis of binary quadric hyper-trend surface method, and its algorithm and programming method are presented.
结合显式动力学有限元方法、几何模型更新方法、隐式静力有限元方法对立-平辊轧制过程三道次三维热、力场进行了分析。
Three passes of vertical-horizontal(V-H) rolling process with 3-D thermal and mechanic field was simulated by explicit dynamic FEM, updating geometric method and implicit static FEM.
本文应用有限元参数二次规划法求解采煤机牵引行走机构齿轨接触强度问题，介绍了有限元建模和网格划分，分析了计算结果。
The paper deals with the contact strength problem of tractive mechanism of shearer by the finite element parametric quadratic programming method.
采用FORTRAN语言对有限元软件DEFORM - 2d进行了二次开发，实现了2519铝合金多道次热轧过程的热力-组织耦合分析。
FORTRAN language was secondarily used to develop DEFORM-2D software, a heat-force-microstructure simulation on the multi-pass hot rolling of 2519 aluminum alloy was realized.
采用FORTRAN语言对有限元软件DEFORM - 2d进行了二次开发，实现了2519铝合金多道次热轧过程的热力-组织耦合分析。
FORTRAN language was secondarily used to develop DEFORM-2D software, a heat-force-microstructure simulation on the multi-pass hot rolling of 2519 aluminum alloy was realized.
应用推荐