阐述水冷热模法管模涂料的组成。
The Ingredients of the coating used for water-cooled hot mould process was described.
并可用于热模法铸态离心球铁管的生产。
The CB wash can be used to produce as-cast centrifugal ductile iron pipes by heated mold method.
研究了热模法离心铸造球铁管的退火工艺。
The annealing process of centrifugal ductile cast iron pipe by the heated mould method is studied.
与计模法有关的半相位移关系得到了完善。
Unified half phase shift relations related to the above rule are improved and completed.
实现了用远场掩模法对单模光纤模场直径的测量。
Therefore, measurement of mode field diameter of single mode fibers by far-field mask is realized.
验证结果表明新模型和方法较矢量模法更为合理。
By comparing the modified method model with the existing one, result demonstrated that the new model and method were more reasonable than vector magni...
在这个教程中，你可以学习到最基础的简模建模法。
In this video tutorial you can learn the basics of low-poly modelling.
还提出了从根本上解决厚制品收缩的方法——盆地修模法。
The basin amend mould method, ie, radically solution to shrink of thick products was supplied.
测得的波导参数在测量误差范围内与用导模法测得的数据一致。
The measured parameters of the waveguide agreed with data measured by using guided mode method in measuring error ranges.
前言：目的：探讨一种改良核桩根管取模法的应用及临床意义。
Objective: the purpose of this study was to investigate the application and clinical significance of taking dental impression with an improved method.
可通过模制制备及形成所述镜片，所述模制包括注模法或半注模法。
Lens can be prepared and formed by molding including a cast molding process or a half cast molding process.
特别是其中的参数识别方法和相对标高立模法，值得其他类似工程借鉴。
In particular, the methods of parameter identification and relative-elevation template adjustment are worthy reference for other similar projects.
附壁式爬模法在烟囱施工的安装、提升操作、高空拆除过程中的安全技术措施。
The author describes the safety technological measures of the wall-attachment climbing mould method in the process of installation, lifting and high altitude demolition in chimney construction.
负弹模法可适用于多种情况，且精度高又省事，为结构应力分析带来极大方便。
The negative elastic modulus method, highly accurate, easy to use, is useful in many cases, and it brings great convenience to the stress analysis oJ structures.
随固相体积分数的增加，水基凝胶注模法坯体密度逐渐增加，但强度逐渐降低。
With increasing solid loading, density of AGC green body increases gradually, but strength decreases gradually.
主要介绍采用钻孔弹模法和声波法对灌浆处理后的坝基岩体进行质量检测的原理和方法。
Introduced in the paper are the principle and method of borehole elastic modulus inspection and sound wave inspection used in the quality inspection of grouted rock mass of a dam foundation.
分析了支座激励与响应之间的关系，利用图模法推导出蜂窝纸板-质量系统的振动传递率公式。
The relationship between the base excitation and the system response was analyzed, the transmissibility equation of the honeycomb paperboard-mass system was formulated using graph model.
由使用棱镜耦合器的一种新技术即漏模法，测量了平板玻璃光波导的参数(薄膜的折射率和厚度)。
The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.
分析了影响合金优质量的各种因素，以及存在的基本问题，并讨论了用消失模法实现表面合金化的优点。
The factors to influence the quality of surface alloying and existing problems are analyzed, and the advantages of surface alloying of EPC castings are discussed.
结果表明，与砂型铸件相比，消失模法生产的铸件尺寸精度及质量提高，工艺出品率提高到65%以上。
Results showed that compared with sand casting castings, dimension precision and quality of lost pattern castings can be improved and rate of finished products can be increased up to65percent.
因此国外厂家对超高压交联聚乙烯电缆如果采用“挤塑模铸法”，目前均采取“分层次挤塑硫化”工艺方式。
Therefore, if the foreign plants adopt plastic extrusion molding for over-voltage crosslinked polythene cable, they currently adopt "plastic extrusion sulfuration by layers" method.
本文提出的网络模矢法是将网络分析法与模矢探索技术结合起来的方法。
The NAPS method presented in this paper is a method combining a network analysis with a pattern search technology.
导出了关于混合模的耦合边界积分方程组及其退化形式，并用矩量法将之离散为齐次代数方程组，从而得波导的混合模传输常数；
The coupled boundary integral equations and their reduced forms are deduced for hybrid mode problems, and these equations are discreted into a system of linear algebraic equations by moment method.
在综合大量实例的基础上，提出双高斯函数逼近多模光纤的光脉冲输出的解析近似方法，使时域法确定光纤带宽的精度大为提高。
On the base of a plenty of facts we suggested a method in which bi-Gaussian form is approached the output pulse in multimode fibers The accuracy measuring band in time domain can be improved highly.
其中由正交法设计得到实验样本，由软试模提取模具的SDV值，将其作为优化目标。
It takes design experiment samples by orthogonal plan method and regards the SDV values which come from soft trying die as goal of optimizing.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
This strategy combines the fuzzy logics with the method of sliding mode control, thus can reduce the chattering without decreasing the robustness of system.
我们将讨论拔靴集成法与多模激发法，以及这两个演算法是如何成功的被运用。我们也将介绍近来运用与拔靴集成法相似的方法，结合支持向量机所做的一些案例。
We discuss bagging and boosting and suggest some plausible justification for their success. We also describe some recent work about combining SVMs in a way similar to bagging.
我们将讨论拔靴集成法与多模激发法，以及这两个演算法是如何成功的被运用。我们也将介绍近来运用与拔靴集成法相似的方法，结合支持向量机所做的一些案例。
We discuss bagging and boosting and suggest some plausible justification for their success. We also describe some recent work about combining SVMs in a way similar to bagging.
应用推荐