因此，经济批量模型假设的前提条件并不完全成立，经济订货批量的计算公式也就需要改进。
Therefore, suppose the presupposition of economic batch quantity model not to be completely established, its calculating formula shall be needed to be modified.
分别导出了单面粘贴驱动器和双面粘贴驱动器时的分布力模型的计算公式。
The calculation equations of distributed force model are derived for actuators bonded on structure by single-sided and double-sided.
提出了双目标模型中粒子的电荷和受力的计算公式，引导不可行粒子转化为满足约束条件的粒子；
The computational equations of the charge and force exerted on the particles are presented for the bi-objective model, which will lead the infeasible particles to transform into feasible ones.
测量结果的对比分析表明，象基线对立体模型下的地形高差测量没有影响，现用高差计算公式不能给出正确的结果。
The contrast analysis of measured results showed that the length of the image base line had no effect on the measurement of height difference under stereomodel.
本文根据作者提出的细观单元有限元研究的结果，建议了一组新的界面本构模型以及界面剥离强度计算公式。
In this paper, a group of new models and the formulas for calculating the debonding strength of interface are presented based on the predictions of a mesoscale finite element model.
根据校直过程模型，对现有校直修正量的计算公式进行了理论分析，为自动校直机的开发研制提供了技术支持。
Based on the model of straightening process, theoretical basis of formula calculating straightening amount was analyzed. It is helpful for design and development of automatic straightening machine.
建立了稠油集输系统的能量平衡分析模型，给出了评价指标及其计算公式。
Setting up an energy balance analysis model of heavy oil gathering system and gives evaluation index and calculation formula.
在平板叠加理论的基础上，建立了一个有限长对称矩形压力容器的设计模型，并推导出其侧板厚度的计算公式。
A design model of a finite length rectangular pressure vessel was established based on the plate heap theory, the calculation formula of the side plate thickness was derived.
构造了含有多种计算公式和表格的模型库；
The system constructs a model base where there are many kinds of calculation models and forms.
在试验的基础上提出了集中荷载作用下轻骨料混凝土梁受剪承载力计算公式的模型。
Based on the experimental results, the calculation formula model of shear capacity of lightweight aggregate concrete beams is put forward.
采用集总参数模型，推导了脉冲堆燃料元件瞬态温度场的计算公式；
The formula for calculating transient temperature field in pulse reactor fuel element is derived with lumped parameter models.
该能量转换分析模型和计算公式可判断系统的用能水平，寻找系统的用能薄弱环节。
Using the model and calculation formula, one can evaluate the system energy consumption and find out the energy loss factors.
本研究建立了人体上、下肢打击中心的数学模型，并推算了相应的计算公式。
This paper tries to establish mathematical model of center of percussion on body limbs in sports activities, implores its calculation formula.
根据框支墙中钢筋的特点，确定了钢筋与混凝土的材料组合模型，导出刚度矩阵的计算公式。使框支剪力墙结构的非线性有限条法分析成为可能。
According to the features of reinforcing bars in the wall, authors model the combing material model of reinforcement and concrete and get the calculation formulation of a stiffness matrix.
根据模型分解的思想，采用变密度多层地壳密度模型，据此推导了相应的重力异常正演计算公式。
The variable density multilayered crustal model is put forward according to the idea of model decompose in this paper, and the corresponding gravity forward formula is deduced.
建立了锅炉对流受热面传热熵产的计算模型，并给出了传热熵产生数的计算公式。
The calculation model of heat transfer entropy productions of convective heating surfaces of boiler is set up, and the calculating formula of heat transfer entropy production is presented.
本文应用最优控制理论，建立了非线性成本曲线的系统网络优化模型及计算公式。
Based on the optimal control theory, this paper has established the scheduling model in the system network and the formula of computation of the nonlinear cost-time curve.
所得结果符合实际，证明了该模型及其计算公式对材料进行寿命预测是可行的。
The calculated data accord with the fact and indicate that life forecast by the model and its math formula are practical.
实际资料处理表明，利用该计算公式处理的结果与各向同性模型相比，更符合破裂压力实际监测结果。
The data demonstrate that the new model is more realistic and closer to the field monitoring results.
在分析试验结果的基础上，提出了确定裂缝闭合弯矩(或应力)的力学模型和计算公式。
Based on the test results, the calculation model and the method for predicting crack closing moments (or stresses) are presented.
首先推导出了三维油膜试验数学模型和动特性系数的计算公式，并由此确定试验方案。
First, in this article, the mathematical model of the experiment for the three-dimensional oil film and the computative formulas of the dynamic characteristic coefficients were deduced.
理论计算和实际测试结果的比对表明，本文提出的动态力学模型与实际情况较接近，计算公式和计算方法正确，测试结果可信。
Compared calculation with practice test, this paper puts forward the dynamic mechanics modal which near the practice condition, right calculate formula and method and creditable test result.
基于环件几何模型导出了环件直径计算公式，建立了冷轧中环件直径与环件壁厚和轧制进给量之间的关系。
Based on the ring geometrical model, the calculation formulae of ring diameters were DE rived and the relations between ring diameters, thickness and the rolling feeding amount were established.
对某闭气炮闩简化模型，将该方法的结果与有限元数值模拟的结果进行了对比，验证了所建模型和计算公式的合理性。
Simultaneously, the comparison of the results from the method developed in this paper to the FEM results for a simplified model of a practical instance shows the reasonability of the method.
其次，采用应力与强度干涉模型和蒙特卡罗模拟法，解决了可靠度计算公式中复杂积分的计算问题。
Then, the complex integral calculation problem in the reliability model of stress and strength interference was simplified by using the Monte Carlo Simulation Method.
并且利用潜水蒸发的经验公式和数学模型，推导出潜水蒸发的计算公式。
And using the experimental formula and mathematical model, the computing formula for the phreatic water evaporation is educed.
对确定大型岸桥起升动载系数的力学模型、求解方法和计算公式等进行了理论研究，并进行了实际测试。
Theory analysis of dynamics modal, solving method and calculate formula of large quayside container crane dynamic coefficient of lifting, and practice test is processed.
对确定大型岸桥起升动载系数的力学模型、求解方法和计算公式等进行了理论研究，并进行了实际测试。
Theory analysis of dynamics modal, solving method and calculate formula of large quayside container crane dynamic coefficient of lifting, and practice test is processed.
应用推荐