模型材料是低弹模的聚氨酯橡胶。
模型材料为环氧树脂平板。
模型材料由光学玻璃纤维增强环氧树脂制成。
Birefringent composite models are fabricated using epoxy resin reinforced with unidirectionally oriented of optic glass fibers.
模型材料石膏具有与混凝土相似的断裂力学特性。
The features of fracture mechanics of plaster as the model material are similar to those of the concrete.
但对于较大模型比尺，很难找到理想的模型材料。
However, it is difficult to select suitable material of model pipes for larger model scale.
它还十分适用于存在初应力的模型材料光弹性分析问题。
It is also applicable to the problem of photo orthotropic elastic analysis for the model materials with residual stresses.
通过分析，探明了离心结构模型材料的选择方法和范围。
The preparation technic, the testing method of the meehanical behaviours and the application of the centrifugal simulating model materials are induced and analysed.
并指出，熟石膏较适合作为低弹模材料的相似模型材料。
And it is pointed out that plaster is more suitable for simulating material of low Young's modulus.
并指出，熟石膏较适合作为低弹模材料的相似模型材料。
And it is pointed out that plaster is more suitable for simulating material...
特种模型材料由环氧树脂、增韧剂、固化剂和金属粉构成。
The special model material is composed of epoxy resins, plasticizer, solidified agent and metal power.
硅灰是用以研究混凝土用的活性火山灰质材料的理想模型材料。
Silica fume is considered as an ideal modelling material for reactive pozzolans used in concrete.
给出了适合于连续包覆工艺研究的几种光塑性模型材料及性能。
Some modeling materials suitable for the study of CONCLAD technology are recommended.
在测力模型设计中主要考虑了模型材料及天平的选取，模型的节段设计。
The force measurement model also has been designed by some factors, such as: the choices of strain balance and material, model segment designing.
实验在经改装后的铣床上进行，以聚碳酸酯作为刀具模型材料切削铅板。
The tests are carried out on milling machine after conversion. A model of cutting tool, made of polycarbonate, machines a thin lead plate.
模拟水流、结构及其相互耦合系统的水弹性模型，对模型材料具有特殊要求。
Hydroelastic model simulating flow, structure and their coupling system requires especial model material.
包紧力的大小与铝液浇注温度、成形压力、孔径尺寸、 模型材料的物理性质等有关。
Quantity of enclosed strength is due to cast temperature, shaping pressure , hole dimension, physical property of die material, etc.
结果表明：带衬套挤压和不带衬套冷挤压时孔边载荷的分布，模型材料与原型实际挤压结果相似；
The results show that the stress and strain distribution around the cold worked hole are similar between the model and real object.
核电厂通常都会选址于荷载作用相对稳定的区域，因此，本文针对核电厂房进行模型材料的不确定性分析。
Nuclear power plant usually is located at the load relatively stable region, therefore, model uncertainty analysis of materials for nuclear power plants is made.
针对岩石类材料压剪破坏，国内外学者做了大量真实岩石和模型材料的试验，并进行相应的数值模拟工作。
A large number of real rock and model material experiments and numerical simulations on the mixed mode fracture under compression-shear loading had been carried out by scholars at home and abroad.
提出了B - p本构模型材料参数估计的新方法，算例分析表明，该新方法提高了参数估计的精度和效率。
A new method of estimating the parameters in B-P model is presented. The computational results indicate that the accuracy and efficiency of the new method are improved.
理论上讲，按重力相似准则设计模型，并保证模型材料与原型材料的弹性相似，即能在模型上模拟原型的水击现象。
The water hammer in a pressure pipe in prototype can be in terms of theory simulated in a model, based on the gravity similarity and elastic material similarity.
高度的耐热性以及较高的最适反应温度使得这些酶类成为研究蛋白质结构与功能关系以及蛋白质耐热机制的极好的模型材料。
Thermostablility and the optimal reaction temperature make the enzyme an excellent model in the research of the structure and function of the protein.
本文利用兆赫兹频率级别的聚焦超声换能器诱发冲击波作用于结石模型材料，采用不同的声波参数包括频率、强度、占空比等进行了实验。
We used a Mega Hz focused transducer to focus on the surface of the calculus model and tried different frequency, intensity, time and duty cycle.
本文利用兆赫兹频率级别的聚焦超声换能器诱发冲击波作用于结石模型材料，采用不同的声波参数包括频率、强度、占空比等进行了实验。
We used a Mega Hz focused transducer to focus on the surface of the calculus model and tried different frequency, intensity, time and duty cycle.
应用推荐