慢速工作时，可以满足精密装卸，砂箱合模，机床检修等精细作业的要求。
Slow work, can meet the precision handling, sand box mold, machine maintenance and other fine work requirements.
这种拌合料灌入合适的模框中，振捣压实，让它硬化。
This mixture is placed into a suitable mould, compacted, and allowed to harden .
互联的两个液压泵、优良的控制系统确保高速开模、合模。
High opening and closing speeds thanks to differential control system and interconnection of both pumps.
整个合模过程模板精确的平行度。
合模油缸的分流切换系统允许高速开合模，使空循环时间最短。
The differential switching system of the clamping cylinder allows high opening and closing speeds and minimal dry cycle times.
针对这一问题，本文研究了零件加工误差对动模板合模位置的影响，得出了零件加工误差的许用值范围，并计算了由于销轴摩擦力对合模力放大比的影响关系式。
Aiming at these problems, this paper studies how the original error affects the accuracy, works out its allowable values, and finds out the equation between friction of pins and clamping force.
使用差动齿轮，可高速开合模。
High opening and closing speeds thanks to differential gears.
模具变形分析结果表明，随着焊合室深度增加，模芯变形程度增大，对应力分布来说，存在一个最佳的焊合室深度。
Die stress analysis results show that the deformation of the die core increases with welding chamber height. For the stress distribution, there exists a best welding chamber height.
合模装置是注塑机中最重要的机械部件，其中模板为最主要的零件之一。
The clamping system is the most important mechanical parts of the injection moulding machine, the platens are primary components.
极其坚固的直压式合模系统。
介绍一种气压传动双模具合模装置的设计，包括其工作原理和主要功能结构。
This article introduces the design of a Clamping System driven by the atmospheric power of a blow-molding machine with double molds.
为改进塑料注射成型机合模机构的设计、模具设计提供了可靠数据。
It supplies reliable information for improving the design of the mould-assem bling mechanism and the moulds.
采用ANSYS软件对前、后固定模板及动模板的挠度进行了有限元计算，进而求解了合模机构的系统刚度及临界角。
Utilize ANSYS to compute deflection of the each of moldboard stroke in infinite elements' method and then solve the systematical stiffness and the critical Angle of clamping unit.
对模具结构、合模加压系统的机理和结构作了介绍，讨论了压力调整的可行性。
And we also introduce the construction of mold, the mechanism and construction of mold-closing pressure-increasing system, the feasibility of pressure adjustment.
本机合模装置属液压式结构，主要由导柱、动模板、支承板、锁模油缸等组成。
This device adopts hydraulic structure and is mainly made up of guide pole movable platen support plate and clamping cylinder etc.
详细介绍了如何选择合模机的方法。
The method of how to choose die spotting machine is introduced in detail.
可直观的看到合模力。
结合压铸机合模机构的优化设计，表明此算法可有效解决工程问题的优化。
Finally, through the locking mechanism's optimization of die-casting machine, the result shows that the algorithm could effectively resolve the optimization of engineering problems.
介绍了汽车消声器纵缝咬边胀合技术及其咬边芯模机构的设计计算。
Expanding and closing technique of core-die of longitudinal seam occlusion machine for automobile silencer and design calculation of such mechanics have been introduced.
同时，设计了专门的合模、分模夹具。
Also, special clamps used for jointing and separating are designed.
文章利用对称性，采用左右合模工艺，提高材料利用率。
The technological design makes use of symmetry and adopts the two mould process, which increases material yield ratio.
模板是注塑机合模机构的重要零件。
The platens are the important parts of clamping system in injection molding machine.
合模快速，且有低压安全锁模装置，保护模具。
Feel fast jointly, and there is mould device of low-voltage safety lock, protect the mould.
合模快速，且有低压安全锁模装置，保护模具。
Shut the mould fast, and have mould device of low-voltage safety lock, protect, the mould.
滑块要用液压油缸抽芯以保证开合模顺序。
The slide pins will use an oil cylinder to assure that the process is in proper order.
采用现代设计理论和方法对注塑机双曲肘五支铰合模机构进行设计研究，建立了符合工程实际应用的双曲肘五支铰合模机构理论模型，并应用复合形法原理。
By using the modern design theroy methods the double toggle clamping system of injection machine is discussed in defail mathematical models for clamp unit design in particular.
采用现代设计理论和方法对注塑机双曲肘五支铰合模机构进行设计研究，建立了符合工程实际应用的双曲肘五支铰合模机构理论模型，并应用复合形法原理。
By using the modern design theroy methods the double toggle clamping system of injection machine is discussed in defail mathematical models for clamp unit design in particular.
应用推荐