用经酶处理后的麦秸作原料，可以压制出性能较好的脲醛树脂胶合的麦秸刨花板。
The better property of wheat straw particleboard bonded UF can be produced with the raw material of wheat straw disposed by enzymes.
而对于环氧树脂胶合试件来说，丙酮表面处理处理前后压缩剪切强度的差异不大。
As for the epoxy adhesive, there was little difference before and after acetone surface treatment.
使用PS生物质合成树脂胶合板，感受木材天然品质，再也不必担心胶合板会释放有害物质，可以充分享用大自然带给我们的天然物质。
While we using the PS plywood, it is not only experiencing natural wood quality, but also without worrying about toxic substance emission. We can fully enjoy the nature.
加拿大香脂：从香脂冷杉中获取的一种有粘性的，淡黄色的透明树脂，用作玻璃透镜的胶合剂或将标本粘贴在显微薄片上。
Canada balsam: a viscous yellowish transparent resin obtained from the balsam fir and used as a cement for glass lenses and for mounting specimens on microscopic slides.
加拿大香脂：从香脂冷杉中获取的一种有粘性的、淡黄色的透明树脂，用作玻璃透镜的胶合剂或将标本粘贴在显微薄片上。
Canada balsam: a viscous, yellowish, transparent resin obtained from the balsam fir and used as a cement for glass lenses and for mounting specimens on microscopic slides.
研究了对紫胶改性酚醛树脂胶粘剂的固化时间、接胶合板的粘接强度和甲醛释放量进行了测定。
The research of phenol-formaldehyde (PF) resin modified with lac can be expected to widen the application of the lac and enlarge the utilization of the renewable resource.
以改性三聚氰胺甲醛树脂（MF树脂）和酚醛树脂（PF树脂）为胶粘剂，设计了两组热压工艺参数，按照“冷-热-冷”工艺压制竹帘胶合板。
Taking modified MF and PF resin as the adhesive and using "cool-hot-cool" technology, this paper designs two groups of technological parameters of hot-pressing to press bamboo curtain plywood.
研究了化学改性皮胶加入脲醛（UF）树脂对胶合性能的影响，旨在提高普通脲醛树脂应用性能。
The effect of modified hide glue agent on the bonding property of urea-formaldehyde resin was studied to improve the application performance of UF resin.
采用常规酚醛树脂胶压制多层结构胶合板时，单板含水率通常要求在8%以下。
Normally, moisture content of veneer for structural plywood bonded with current PF resin is required to be less than 8%.
在低毒脲醛树脂胶粘剂合成过程中加入淀粉或氧化淀粉，能有效地改善胶合板板坯的预压性能和胶合板的胶接强度。
Adding amylum or oxidized amylum in the synthesis process of low toxic urea-formaldehyde resin can improve pre-press capability and bonding strength of plywood.
抽样做胶合板耐候性试验表明，MUF树脂可取代酚醛树脂。
Plywood weather-resistant test of radom resin sample showed that the MUF resin can replace the PF resin for plywood production.
主要关注在BL—甲醛消纳剂的研发及其降低使用脲醛树脂生产的胶合板的甲醛释放量的作用程度、作用机理和正确的使用方式、方法；
This research focuses on the development of BL-formaldehyde absorptive, its effect to formaldehyde emission of plywood, and its mechanism and proper method of application.
研究了化学改性豆胶加入酚醛(PF)树脂交联剂后提高胶合板强度的问题。
The effects of the ratio of chemical modified soy-adhesive to phenol formaldehyde (PF) resin on the shear strength of plywood were studied.
结果表明，DF K树脂的终摩尔比和涂胶量对煮沸剥离率的影响最显著，填料添加量影响甚微，并确定了较为理想的冷压胶合工艺参数。
Results show that final molar ratio of DFK resin and spread affected boiling peel percentage significantly, filler has no effect on it. More ideal parameters of cold-press process...
普通空间地板采用的是中性灰聚氨酯树脂材料，而员工所占据的区域因为使用了柔软的地毯和胶合板，反而更舒适一些。
The general Spaces feature neutral, gray polyurethane resin on the floor whereas the areas occupied by the employees are cosier thanks to using soft carpet and plywood.
研究了用酚醛树脂浸渍的杨木单板作表板制造杨木胶合板模板的制造工艺。
The processes of manufacturing poplar plywood with PF impregnated poplar veneer as its outer ply were explored.
它们是用一种普通的塑胶合成树脂做成的。
商店内部，现存的地板上覆盖了一层透明的树脂地板，给人以原始之感，此外桦木胶合木家具也给空间带来暖意。
Inside the store, the existing floor was covered with a transparent resin floor to give the space a "raw feeling", but birch plywood furniture was used to warm up the space.
同时针对不同的脲醛树脂，要采取不同的工艺措施；(3)将单板用BL—甲醛消纳剂浸渍后再按正常工艺生产的胶合板可达到环保E_0级标准，且胶合强度有保证。
The formaldehyde emission of the plywood made of veneers soaked by BL-formaldehyde absorptive can accord with the E_0 class standard, and the bonding strength can be assured at the same time.
将竹帘胶合板的“冷进冷出”工艺改造成“热进热出”工艺，关键技术是降低热压温度，而一种中温固化型的酚醛树脂是实现该技术的主要条件。
PF resin adhesive by mid-temperature curing is made on the main condition that the "cold-in and cold-out" technique used for bamboo curtain plywood should be changed into a "hot-in and hot-out" one.
将竹帘胶合板的“冷进冷出”工艺改造成“热进热出”工艺，关键技术是降低热压温度，而一种中温固化型的酚醛树脂是实现该技术的主要条件。
PF resin adhesive by mid-temperature curing is made on the main condition that the "cold-in and cold-out" technique used for bamboo curtain plywood should be changed into a "hot-in and hot-out" one.
应用推荐