建筑材料和施工方法是建筑结构设计的重要组成部分。
Materials and methods of construction are integral parts of the design of architecture structures.
每个晶体结构由相间的二氧化硅层和高分子聚合材料层组成,相同材料层之间的间距与声子的波长相匹配。
Each crystal structure consists of alternating layers of silicon dioxide and a polymer material, so that the spacing between similar layers matches the wavelength of phonons.
原始材料可能由RAM或硬盘组成,但是不管是哪种情况,文件系统数据结构都是组织由硬件制造商格式化了的扇区和字节。
The metal might consist of RAM or hard disks, but in either case, file system data structures organize the sectors and bytes formatted by the hardware manufacturer.
表示产品形状、尺寸、结构、组成和制造材料的数据、图形和表格等将按软件的需求输入。
Data, diagrams, tables, etc. showing its shape, dimension, structure, fabrication and the material is made from are input as the software requires.
复合材料的界面,常常被看成是表面,实际上是许多的组成、结构和特性组分,其厚度从单原子层到数个微米不等。
Interfaces in composites, often considered as surfaces, are in fact zones of compositional, structural, and property gradients, typically varying in width from a single atom layer to micrometers.
作为固定化酶组成的一部分,载体材料的结构和性质对固定化酶的性能有着巨大的影响。
As a immobilized enzyme composition part, the structure and the performance of carrier material had the huge effect on the performance of immobilized enzyme.
阐述了所谓多孔板体结构的概念、机制和材料组成要求。
The concept of multi-voided plate structure and its material components are introduced.
采用表面化学和材料力学方法,探讨了支架的组成、结构、表面特性、力学性质及细胞相容性。
The composition, structure, surface characteristic, mechanical property, and cell compatibility of the scaffold have been studied by using surface chemistry and material mechanics testing methods.
介绍了新型陀螺仪转子的一些结构特性和材料组成。
Some structure characteristics and material composition of a new type gyro rotor are introduced in this paper.
并就其组成及交联剂用量等条件对材料性能和形态结构的影响作了初步探讨。
The effects of the compositions and processing conditions on the properties and morphological structure of the prepared materials were also discussed.
利用差热分析(DTA)、X-射线衍射(XRD)和扫描电镜(SEM)等手段分析了微晶玻璃的相变、相组成及微观结构,同时测定了材料的部分性能。
The phase transformation, phase composition and microstructure of the glass-ceramics were investigated by means of DTA, XRD and SEM. Some properties of the glass-ceramics were also determined.
材料的光谱特性能够直接反映材料的组成、结构和形态特征。
The spectral characteristic of the materials can indicate its component, structure and morphology.
超级电容器主要由极化电极、集电极、电解质、隔离膜、引线和封装材料几部分组成,各部分的组成、结构均对其性能有重要的影响。
It consists of polarized electrode, collector, electrolyte, separator, lead and packing material, and its performances are affected by the composition and structure of each component greatly.
面板,钢筋和玻璃组成房子的大概结构,水钳在材料内层以均衡室内温度。
Panels, some of steel, and some of glass, make up the structure of the house and a sheet of water is trapped between the inner layers, which equalizes the temperature across the building.
利用转移矩阵方法,研究了负介电常数材料和负磁导率材料组成的双层共轭结构的共振隧穿问题。
The resonance and tunneling problem of pairing conjugate structure consisting of negative permittivity and negative permeability materials were studied by using transfer matrix methods.
基于使用性能的路面设计应该从材料组成设计和结构设计两方面考虑。
Both mixture design and structure design should be considered in pavement design based on performance.
详细介绍了试验车辆的底盘和车身的设计要求、材料和结构组成。
The design requirements, materials and structure of the vehicle's chassis and body were expounded.
复合材料界面结构由芯材扩散层、激冷凝固层、方向性生长层和胞状晶粒层组成。
The interface structure of composite consists of core material diffusion layer, chilling solidified layer, directional growth layer, and cellular granular layer.
用金属材料制成的一体化可动结构和叠层式压电元件可组成蛇型步进式直线驱动器,能实现高精度、高可靠性的直线步进驱动。
The snake-step linear actuator is constructed based on the integrated moving structure made by metal and the stack PZT, it can achieve the line-step moving of high accuracy and high reliability.
分析车灯的结构和组成材料的焊接性;阐述精密电阻点焊的基本原理;
This article introduces the structure of auto lamp and analyzes the weldability of its composition.
本文作者主要研究了不同烧成温度对复合材料致密化、物相组成和显微结构的影响。
In this paper, the effect of sintering temperature on densification, phase compositions and microstructure was mainly studied.
对复合材料形貌和组成结构进行了分析,并用复合材料进行了抗菌实验。
The phase, composition and structure of the composite were analysized and the bacterial-resistance properties were tested.
将最终形成的IPN材料进行了力学性能和耐水性的测试分析,并以未形成IPN结构的同组成样品的数据作对比,突出了该材料的优越性。
The tested results of mechanical properties and water resistant data proved the advantages of IPN material, compared with the general compounds which had the same composition.
研究了钢-碳纤维组成的混合体系对水泥基复合材料结构和性能的影响。
The influences of hybrid fibre systems consisting of steel fibres and carbon fibres on the structural and properties of cementitious composites were studied.
影响音响线材品质,主要由组成线缆的导电线芯和绝缘材料的材质,以及线缆结构等三大因素。
The major factors that affect the quality of audio wire and cable are quality of conductor, quality of insulation and cable construction. The conductor usually is made of copper.
用IR、TGA和燃烧实验对复合材料的结构和组成进行了表征,并对复合材料的流变性能、热稳定性、力学性能进行了初步研究。
The composites were investigated by IR, TGA and burning test; the rheological properties, thermal and mechanical properties were studied in detail.
利用防爆轰波模拟试验装置研究了由装甲钢和芳纶复合材料组成的不同复合结构对爆轰波的防护性能。
The detonation wave resistance of multi-layer structures composed of Kevlar composites and amour steels was studied by using simulation test device.
介绍了制造合成革的新型材料——海岛型超细纤维的组成、结构和染色性能,分别对基布中的PA和pu组分进行了分析。
The composition, structure and dyeing properties of sea-island composite fiber were introduced. And the composition of pa and PU were analyzed separately.
介绍了制造合成革的新型材料——海岛型超细纤维的组成、结构和染色性能,分别对基布中的PA和pu组分进行了分析。
The composition, structure and dyeing properties of sea-island composite fiber were introduced. And the composition of pa and PU were analyzed separately.
应用推荐