在眼镜横梁上的滑动控制杆推动流体向前或向后，以改变那层薄膜的形状，从而根据用户当前的动作来调整焦距。
A slide lever on the bridge of the eyeglasses pushes the fluid forward or backward to alter the shape of that membrane, changing the focal distance depending on what the user is doing.
算例表明一些描述杆几何形状的变量在撞击分析中具有重要作用。
It is also found that some variables describing the geometrical shape of rods play an important role in impact dynamic system.
由于几何形状的差异，阻力杆的准确顺序可能有所不同。因此，清理问题可能会迫使你把杠杆的导向杆的顶部或底部。这是确定。
Because of geometry differences, the exact order of the drag rods may differ. Consequently, clearance issues may force you to place the rods on top or bottom of the steering levers. This is ok.
给出混沌性态与规则性态所对应弹性杆几何形状的对照。
The geometric shapes of the rod with chaotic and regular behavior are presented.
数字模型应用创建了重复的对角交叉杆件模型，形成折叠成三列的弯曲的树冠形状。
Digital modelling was used to create a repeating pattern of diagonally intersecting poles, forming the curving canopy shape that folds down into three columns.
本方法适用于任意横截面形状和任意边界条件的薄壁杆件。
The proposed method is applicable for the thin-walled member of any cross section with any boundary condition.
顶杆零件的位置和数目，取决于塑件的尺寸和形状。
The location of the ejector pin elements, and the number used, is dependent on the components size and shape.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
物质边界装置，形状是一根固体电介质杆或充满电介质的管状导体，能够导引高频电磁波。
A system of material boundaries in the form of a solid dielectric rod or dielectric-filled tubular conductor capable of guiding high-frequency electromagnetic waves.
传统设计超声变幅杆的方法中不同形状函数变幅杆性能表达式复杂，计算和设计工作量都很大。
In the traditional design methods, the different shape function of ultrasonic horn is very complicated and tedious to be calculated.
葡萄酒杯有各种各样的形状和大小，然而为大多数人所熟知的还是标准的、带有杯杆的葡萄酒杯。
Wine glasses come in different shapes and sizes but most people are familiar with the standard stemmed one.
可弯曲的灯杆使您能够调节和改变灯的形状。
Bendable arms allow you to adjust and vary the shape of the lamp.
压杆的稳定设计是通过计算压杆截面积选用截面形状来达到的。
The stable design of compressed rods is realized by calculating the cross aero and selecting the shape of rods.
根据生产实践及锚杆支护理论，论述了在厚煤层大断面切眼中，如何进行巷道断面形状、锚杆支护参数的选择及其巷道的施工方法。
How to select road section shape, bolting parameter and roadway construction method in large section cut in thick coal seam according to production reality and bolting theory are introduced.
R 1受几个因素的影响，包括目标和顶杆的材料和状况、顶尖的表面积和形状以及所施加的力的大小。
R1 is influenced by several factors, including the material and condition of the target and plunger, the surface area and shape of the plunger tip, and the amount of force applied.
为了提高凿岩钎杆用中空钢的使用寿命，设计了奇数边截面形状的中空钢。
In order to enhance the service hfe of hollow steel for rock drill stem, the odd number side section shape hollow steel has been designed.
较小的杆，当时执意要的形状和连接到伺服非洲之角本身。
The smaller rod was then bent to shape and attached to the servo horn itself.
本文推导出了任意截面形状的楔形杆的单元刚度矩阵和单元几何刚度矩阵。
In this paper, the element stiffness and consistent geometric 'stiffness matrices for linearly tapered members with arbitrary cross-section have been derived in explicit forms.
这将为设计系杆的截面形状和尺寸提供了重要的依据。
It provides an important calculate basis for design section shape and size of the rod.
发现机构上下平台外接圆半径的差和移动副杆长的关系对机构可达工作空间大小和形状的影响；
The dimension and shape of workspace are analyzed which are effected by the relationship of two factors which are the difference of fixed and moving platform's circumradius and the prismatic's length.
由于几何形状的差异，阻力杆的准确顺序可能有所不同。
Because of geometry differences, the exact order of the drag rods may differ.
槽刃下面有一落料槽，通过冲头刃在槽刃内冲切锚杆，可在锚杆上得到所需形状的槽口。
A charging groove is arranged below the groove edge, and groove openings forming the required shape can be obtained on the anchor rod through the punch edge cutting the anchor rods in the groove edge.
从土钉锚杆在土层中不同受力与变形状态分析入手，结合长期工程实践和相关试验数据，分析研究与探讨性地提出了适用于不同类型土钉刚度与变形的计算公式。
The actual application state of anchorage technology is presented, such as types of bolt structure, anchorage machine, anchorage material, soil nailed wall and anchorage support of soft soils.
本方法采用线性函数作为横截面翘曲位移的插值函数，适用于任意横截面形状和任意边界条件的薄壁杆件。
A linear function is used to express the warping displacements along the cross section of the thin-walled member.
其特征在于它的球形状的鱼铃安装在杆形状的海杆上。是一种很具有实用价值的一种新型发光的钓鱼竿。
The utility model is characterized in that the spherical fish bell is installed on the rod-shaped sea rod, and the utility model is the novel luminous fishing rod of practical value.
消耗在一个象蛋形状的唇上。活塞杆和活塞腔不同心。
Wear on the dynamic lip is egg-shaped. The rod and the piston bore are not concentric.
通过改变巷道断面形状、加帮部锚杆和顶板锚杆，可以改变自稳隐形拱和极限自稳隐形拱的曲线位置，为支护设计提供了依据。
The curve position of self-stabilized hidden arch can be changed by changing the section configuration, adding side and roof bolts. The results are helpful and can provide a basis fo…
本实用新型属于用于不同类型的机床，加工不同形状套类零、部件深孔的组合式刀杆。
The utility model belongs to a combined cutter arbor which is used for various types of machine tools and used for processing the deep holes of accessories and components with different shapes.
本实用新型属于用于不同类型的机床，加工不同形状套类零、部件深孔的组合式刀杆。
The utility model belongs to a combined cutter arbor which is used for various types of machine tools and used for processing the deep holes of accessories and components with different shapes.
应用推荐