最后给出了其在水电机组控制系统中的应用。
The application of new fuzzy controller in hydro turbine control system is investigated.
最后探讨了有关理论在水轮发电机组控制系统中的应用前景。
Finally, this paper examines the prospects for the use of the related theory in the hydroelectric generating set control systems.
本文介绍了双速电机软并网型风力发电机组控制系统的构成和特点。
The paper introduces the structure and characteristic of soft cut-in wind turbine control system using a dual speed asynchronous generator.
风电机组控制系统中PI控制器较多，需要辨识各PI控制器的参数。
PI controller is widely used in wind turbine control system and its parameters need to be identified.
系统设计内容包含了交直流电气传动控制系统，柴油发电机组控制系统。
The system design content includes the AC-DC electric drive control system, diesel generator set control system.
论文以兆瓦级直驱式风力发电机组为基础，研究和设计了基于PAC的风力发电机组控制系统。
The control system of wind turbine based on PAC is researched and designed on the basis of MW-level direct-driven wind turbine in this thesis.
分析了高速发电机组控制系统的工作原理，研制了一套控制系统，并对高速永磁发电机进行了初步的实验研究。
Based on the operation principle of the system, a set of control unit is designed and some basic tests have been done.
介绍了100MW机组控制系统改造过程中遇到的问题和解决措施，强调了改造后汽轮机控制系统增强的性能。
Some problems existing during DEH upgrading for 100 MW turbine and their countermeasures are introduced, the function and characteristics of DEH control system achieved after upgrading.
多联空调机组控制系统是将变频模块、变频压缩机和制冷系统有机集成一体的控制单元，其技术核心是变频控制模块。
The control system of multi-connected air-condition unit is the control unit which combines a variable frequency module, a variable frequency motor of compressor and a system of refrigeration.
提及的恶性程序能很快发现并进入控制世界上工业过程的计算机组，这说明控制系统在面对这种攻击时是多么的不堪一击。
The malicious program quickly found its way into computers controlling industrial processes the world over, demonstrating how vulnerable control systems are to such attacks.
人们还研制了地面控制系统，以便在机组人员不能工作或发生劫机时，地面能够控制飞机，安全着陆。
Work is also being done on ground-based systems that could take over the controls of an airliner and land it safely if the crew were to become incapacitated in some way or the flight were hijacked.
机组人员开始拆除发现号航天飞机上用来控制航天飞机进入轨道的前向感应控制系统(FRCS)。FRCS使用的自燃燃料和氧化剂在最后航行之后已被清洗干净。
Crew members in Orbiter Processing Facility-2 begin to remove space shuttle Discovery's forward reaction control system (FRCS), which helped steer the shuttle in orbit.
介绍了整流机组极化电源装置的控制系统及技术参数原设计中存在的不足之处造成的电能浪费及运行故障。
Waste of electric and malfunction were caused by the shortage existing in design of the technology parameters of polarization power supply units of rectification sets and control system.
控制系统的功能是在负载随时变化的工况下，确保机组转速恒定，并使电压输出控制在要求范围之内。
The control system functions to keep speed of the machines substantially constant and the voltage within prescribed limits, even the load may change.
本文扼要的总结了近年来热电联产小容量机组采用分散控制系统(Dcs)所取得的丰硕成绩和存在的问题。
This article briefly summarizes the fruitful results and problems of using Distributed Control System (DCS) in small capacity cogeneration units in recent years.
介绍了外高桥电厂2号机组的协调控制系统方式及试运情况，运行状况良好。
The coordinating control system and the pre commissioning operation of the Waigaoqiao Power Plant's No. 2 unit are described.
并对热电联产机组汽机控制系统进行了分析。
The combined heat and power unit turbine control systems were studied.
应用机理分析建模和灰箱建模相结合的方法，建立了单轴燃气轮机发电机组及其控制系统的数学模型。
Applying the method of combining the mechanism analysis modeling and gray box modeling, the mathematic model of the single-shaft gas turbine generating units and the control system was established.
介绍国际上先进的大型离心式压缩机组综合控制系统的发展趋势和技术要点。
A presentation is given of the trend of development and main technical points of the internationally advanced comprehensive control system for large centrifugal compressor units.
MCS和DEH是大型火力发电机组主要的控制系统。
MCS and DEH are main control systems of units in large coal-fired power plants.
如何降低甩负荷时汽轮机组的动态超速始终是汽轮机控制系统设计的重要任务之一。
How to decrease the overspeed while the steam turbine suddenly lose full load is one of the important problems to design the control system of the steam turbine.
本文讨论了如何利用输出反馈配置极点的方法设计大型汽轮发电机组综合控制系统的问题。
The method of -pole assignment for multivariable systems by output feedback and its application to the design of integrated controller of large turbo-generator set are discussed in this paper.
采用了单向解耦设计技术设计了单元机组协调控制系统。
The coordinate control system of generating unit is designed using unidirectional decoupling design technology.
本文介绍了此机组八辊轧机的压下控制系统。
This paper introduces the screw down system of this automatic control system.
文章针对单元机组负荷控制的特点，采用最优预见控制（OPC）策略设计了基于多变量预见控制原理的单元机组负荷最优预见控制系统，并讨论了预见步数对控制品质的影响。
This paper designed a multivariable load Optical Preview Control (OPC) system for a thermal power unit, and discussed the effect of preview step number on control performance of the load OPC system.
主要对冷轧退火涂层机组中的带钢垂度控制系统进行了介绍。
Mainly introduce the strip catenary control system of the Cold Rolling Mill Plant.
针对300MW火力发电机组原锅炉吹灰控制系统存在的联锁回路复杂、故障频繁等问题，阐述了对该系统进行改进的必要性。
Aiming at the problems of interlock circuit complex and faults frequent of the origin boiler soot blowing control system for 300mw generation unit, elaborates the necessity of improvement.
对惠州液化天然气(LNG)电厂联合循环机组旁路控制系统的调节方式、控制方式及其作用进行了简单的介绍和分析。
This paper briefly introduces and analyzes the control mode and function of bypass control system for combined cycle units in Huizhou LNG Power Plant.
本文为锅炉机组及其控制系统的分析和设计提供依据。
This paper provides a basis for the analysis and design of low circulation ratio boilers and their control systems.
本文为锅炉机组及其控制系统的分析和设计提供依据。
This paper provides a basis for the analysis and design of low circulation ratio boilers and their control systems.
应用推荐