可得到更高的渗透通量和机械强度。
Higher osmosis flux and mechanical intensity could be acquired.
复合材料的纳米结构也能使较轻的材料具有很大机械强度。
The nanostructure of composites can also provide great mechanical strength in relatively light materials.
研究了固体催化剂机械强度测试与表征技术。
Secondly, the mechanical-strength measurement and characterization of solid catalysts are investigated.
焙烧球料的机械强度也能满足渗滤浸出操作要求。
The mechanical strength of calcined briquet can meet the needs of percolation leaching operation.
这里把测定机械强度的问题分为两个方面来考虑。
Here the problem of determining the mechanical strength is broken down into two considerations.
全钢组成，机械强度高、承载能力强、防火性能好。
Constituted by all steel sheet, high mechanic strength and loading capacity, excellent fire-proof.
我们用一个简单的模型得出每个物件被卡住所需要的的机械强度。
Using a simple model we relate each of them to the mechanical strength of the jammed state.
工程师需要了解各种材料的机械强度和耐腐蚀的能力。
Engineers need an understanding of the mechanical strength and corrosion resistance of various materials.
结晶度很重要，因为它会影响产品的韧性和机械强度。
The degree of crystallinity is important because it affects toughness and mechanical strength.
它具有较好的耐热性，机械强度高、固化性好等特点。
It has good heat resistance, high mechanical strength, curing characteristics and good.
密封带有良好的耐候性，且长时间不失去粘性和机械强度。
E. seal with good weather resistance, and long time not lose viscosity and mechanical strength.
电池外壳应该有足够的机械强度，使铁锂电池免受机械撞击。
Batterypack should have sufficient strength and the Li-Fe cell inside should be protected from mechanical shocks.
单颗粒压缩强度是衡量人造金刚石机械强度的重要参数之一。
The mechanical strength of diamond crystal particle is usualy eveluated by measuring its compressive strength.
这些机组具有生产率高、机械强度高及织物运行无褶皱的特点。
The ranges are characterized by high productivity, mechanical robustness and crease-free fabric runs.
我们制造的这种纳米复合材料柔软，可塑性强，而且机械强度大。
We make this nanocomposite which is flexible, still soft, but mechanically stronger.
l机械强度高、耐磨、适宜在线反冲洗，操作方便，运行成本低。
L High mechanical strength, anti-friction and suitable for on-line back flush, easy to operate and low cost.
这样可以极大地扩张其表面积，增加电荷负载，又不会降低材料的机械强度。
This massively increases their surface area and hence the charge they can hold, but without impairing the physical strength of the material.
这些脂肪族聚酯然而，更昂贵和缺乏机械强度比传统塑料如聚乙烯。
These aliphatic polyesters are, however, much more expensive and lack mechanical strength compared with conventional plastics such as polyethylene.
它具有机械强度高、韧性好、耐热好及低收缩性、固化性好等特点。
It has high mechanical strength, toughness, good heat resistance and low shrinkage, good curing characteristics.
它具有机械强度高、韧性好、耐热性、低收缩性、固化性好等特点。
It has high mechanical strength, toughness, heat resistance, low shrinkage, good curing characteristics.
壳聚糖施胶后，蚕丝纸的透气性提高，机械强度、抗水性明显增强。
Sizing the silk paper with chitosan solution can enhance the strength and water resistance obviously.
金属类耐热性能与机械强度相当理想，但价格与抗腐蚀性能是其劣势；
The heat resistance and mechanical strength of metal is quite good, but the price and corrosion resistance are its disadvantages.
胶件密度、机械强度、硬度、耐介质系数等性能指标均达到技术要求。
The density, machinery intensity, hardness and medium resistance index of the rubber products meted the technology requirement.
重点讨论了第三相对二硅化钼发热元件的耐热性能和机械强度的影响。
The effect of the third phase on the heat resisting and strength of molybdenum disilicide heating element was discussed.
采用高透过率的钢化玻璃，提高了光的穿透性，保证了组件的机械强度。
Tempered glass: High transmission rate tempered glass increases solar transmission and ensures excellent mechanical strength of solar modules.
缺点是机械强度较低，耐油、耐溶剂和耐酸碱性差，较难硫化，价格较贵。
The disadvantage is lower mechanical strength, oil, solvent and acid poor, difficult to cure more expensive.
铁锰复合球团矿与原铁矿球团相比，具有较高的机械强度和良好的冶金性能。
Iron-manganese ore composite pellets have higher mechanical strength and better metallurgical properties than those of conventional pellets.
本文通过实验，探讨了制备条件对渣油加氢脱金属催化剂载体机械强度的影响。
Influence preparation of parameters on crushing strength of the support for residue oil hydrodemetalation catalysts was investigated through experiments.
它具有机械强度高、韧性好、耐热性好及高的热强度、低收缩性、固化性好等特点。
It has high mechanical strength, toughness, good heat resistance and high thermal intensity, low shrinkage, good curing characteristics.
它具有机械强度高、韧性好、耐热性好及高的热强度、低收缩性、固化性好等特点。
It has high mechanical strength, toughness, good heat resistance and high thermal intensity, low shrinkage, good curing characteristics.
应用推荐