研究了C194合金变形与固溶时效热处理工艺条件对其组织性能的影响。
This paper is about construction and characteristics of C194, which are effected by heat-treatment of solution and aging .
用小角X射线散射研究了多级时效热处理中合金微结构的改变和硬度改变的机理。
The microstructure change and the mechanism of the change in hardness were studied by small-angle X-ray scattering.
结果表明：多重固溶时效热处理可以显著提高合金的塑性和断裂韧度，而对强度的影响不大。
The results showed that multiple solution and aging treatment had a significant effect on increasing plastic property and fracture toughness, although had little effect on strength.
机器采用优质型钢焊接而成，并经过时效热处理，使机器强度高，不变形，能承受高密度制品的膨胀力。
Since this machine is made of high quality profiled bars under the timely heat treatment, so it can bear expansibility of high-consistency products without transmutation and have a high-intensity.
固溶时效热处理使压缩吸能能力随着孔隙率的增大而呈现规律性减小，并使能量吸收效率对孔隙率和孔径的敏感程度减小。
The energy absorption capacity decreased regularly along with the increase of porosity and the energy absorption efficiency became insensitive to pore size (d) and porosity (P_r).
固溶时效热处理使压缩吸能能力随着孔隙率的增大而呈现规律性减小，并使能量吸收效率对孔隙率和孔径的敏感程度减小。
The energy absorption capacity decreased regularly along with the increase of porosity and the energy absorption efficiency became insensitive to pore size(D) and porosity(P…
龙门刨床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
利用正交试验和时效温度试验，分析了不同热处理工艺对2024铝合金材料力学性能的影响。
By employing the orthogonal and ageing-temperature tests, the influences of heat treatment on mechanical properties of 2024 Aluminum alloy sheet were analyzed.
床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
对采用轧后余热处理工艺生产的英标460级钢筋进行不同时间的自然时效后测定其力学性能。
The British Standard grade 460 bars, which when quenched with left heat after rolling, are naturally aged for different times.
这样的热处理工艺称为时效处理。
校青铜真空时效炉是热处理专用设备。
The vacuum time affective furnace is a'special instrument for heat treating of Be - Bronge Alloy.
结果表明，马氏体时效钢铸件热处理后强度较高，受制于其内部铸造缺陷。
It was shown that the maraging steel cast exhibited a higher strength, which was controlled by the casting defects in it.
本文研究了不同热处理时效温度和时效时间对一种活塞环用钴基高温合金的抗拉强度、延伸率、硬度及组织的影响。
The effect of aging treatment on the tensile strength, elongation, hardness and microstructure of a cobalt base superalloy used for pistons rings was investigated in this paper.
叙述了现行工艺模锻的GH4133 B合金精化模锻件的性能和组织特点；叙述了直接时效、添加预备热处理精化模锻件的性能和组织特点。
In this paper the properties and structure characteristics of GH4133B alloy precision die-forgings by the present die forging process, and by direct ageing and preheat treatment are introduced.
研究了热处理工艺（包括均匀化处理、淬火方式和人工时效等）对6063铝合金组织和力学性能的影响。
The effect of heat treatment(including homogenizing treatment, quenching method and artificial aging)on the structure and mechanical property of 6063 aluminum alloy was studied.
全钢板焊接结构，综合处理(振动时效、热处理)消除内应力，有很好的刚性与稳定性。
All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability.
对矿用硬质合金的热处理和时效处理，通常采用喷砂工艺，为改善劳动环境，提出球磨处理技术取代喷砂，取得了明显的技术经济效。
In order to improve working environment of hard alloy for mine, replacement of sand blasting by ball milling handling technology is put forward.
对矿用硬质合金的热处理和时效处理，通常采用喷砂工艺，为改善劳动环境，提出球磨处理技术取代喷砂，取得了明显的技术经济效。
In order to improve working environment of hard alloy for mine, replacement of sand blasting by ball milling handling technology is put forward.
应用推荐