这两种测量方法的差别为研究者提供了对于刺激反应的水平和持续时间的指示。
The difference between the two measures provides the researcher with an indication of the level and duration of the response to the stimulus.
从上一次的评估和建立聪明目标（从反面）到下一次评估这段时间来回顾个人的成就。考虑怎样和何时衡量变化；在你的处置中有很多测量方法，包括：观察；评估期间的讨论；不拘形式的一对一的回顾 ；团队会议；商业结果的考试 ；其他业绩指标；调查；反对能力的评估。
Take time to review the individual’s achievements since the last appraisal and establish SMART objectives (see opposite) for the period until the
如果当初这些办法流行开来，十进制时间测量方法和十进制角度测量方法之于19世纪可能就会像GPS之于20世纪。
Had it come to pass, decimal time and decimal angular measurement might have done for the 19th century what GPS did for the 20th.
除了有限制的暂停时间外，还需要另外一种测量方法来确定分配给应用程序和GC的时间百分比。
A different measure is required that, in addition to bounded pause times, provides a level of determinism for the percentages of time allotted to both the application and GC.
用来测量用户客户机响应时间的测试方法是为了模仿典型用户使用DominoWebAccess的方式而设计的。
The test methodology used to measure the user client response times was designed to simulate how a typical user would use Domino Web Access.
在跟踪输出中加入的方法调用的最小测量时间。
The minimum measured time for a method call to be included in the trace output.
时间约束：测量方法调用的持续时间。
在这个过程中，ping可以监视发送数据包和接收响应花费的时间，这是测量echo过程的响应时间的有效方法。
During the process, ping can monitor the time it takes to send and receive the response, which can be an effective method of measuring the response time of the echo process.
我们测量它的方法，是测量时间，物体通过，10厘米所用的时间。
And the way we're going to measure it is by measuring the time for the objects to move over a distance of ten centimeters.
了解引导过程的时间花在何处是优化它的第一步。 这个 新的内核跟踪选项 提供了测量和改进Linux 引导时间的方法。
Measuring where the boot process is spending its time is the first step to optimizing it.
日晷只有在阳光明媚的时候才会运转很好。因此，其他测量时间流逝的方法便应运而生了。
The sundial works well only when the sun is shining. So, other ways were invented to measure the passing of time.
利用沉积作用，最初的沉积作用速度和吸附时间，描述测量烂泥沉积作用和过滤产物的不同方法。
Different methods are described to measure sludge sedimentation and filtration properties, by use of sedimentation indices, initial sedimentation velocity and capillary suction time.
使用这个方法，用户输入测试电压、测量时间和重复次数。
With this method, the user enters the test voltage, measurement time and the number of iterations.
此方法具有测量精度较低，使用环境要求暗室，长时间的测试容易使人眼疲劳等缺点。
This method has the disadvantages of low measuring precision, requiring environment of darkroom, and making eyes tired after a long-time testing.
结论先行CT脑灌注成像，根据测量值预测脑CTA检查延迟时间是保障CTA检查成功的一种较好的方法。
Conclusion It's a satisfactory method based on successful cerebral CTA study to take the time to peak in CT perfusion as the delay time.
最后，由于减小了建立时间，所以采用加电压测电流的方法测量电阻一般比较快。
Finally, the source voltage, measure current method of resistance measurement is generally faster because of reduced settling times.
在此研究中，PR P血小板浓度运用两种方法测量：作者的自动测量方法；耗时间的人工计数方法。
For the current study, platelet concentrations in PRP specimens were measured in two ways: using the authors' automated approach and a time-consuming manual count technique.
提出一种通过时间来测量位移的方法和原理，依此原理研制了新型的位移传感器。
A new method to the measurement of displacement by using a time interval is presented, and a new type of sensor is made on the basis of these principles.
这种方法利用一光学系统和电路，把线值差转换为时间差来测量。
This method was changed from measuring the dimension difference to the time difference measurement by using an optical system and circuitry.
利用这种方法，计算了冲击电压峰值和波前时间的数字测量误差，并分析了误差的影响因素和变动范围。
Errors in digital measurement of the peak value and front time of impulses are calculated by this method, with influence factors and variance ranges analysed.
本文是关于粒子物理实验中精密时间间隔测量的电子学方法和技术的一个综述。
This is a review of methods and techniques of precise time interval measurement for particle physics experiments.
这种勘探方法测量通过盐岩区的最快(时间最短)的传播路径。
This survey measures the fastest travel path, with part of its path through the salt.
提出了一种具有高的时间和空间分辨率以及长的测量持续时间的动态波前相位测量方法。
A dynamic wavefront phase measurement with the features of high temporal and spatial resolution, and long measuring lasting time was proposed.
该方法能够快速、准确地测量指针式仪表阻尼时间。
The new method can measure damping period of dial instrument rapidly and accurately.
用试验初步研究了确定虚拟仪器冲击刻度因数的方法和虚拟仪器测量时间参数的效果。
In the experiment, the method of determination of impulse scale factor of visual instrument and the effect of measuring the time parameters with visual instrument are studied.
介绍了驱动电路和快速保护电路的原理，及保护电路响应时间的测量方法。
The principle of the drive and protection circuits is introduced, the method of measuring the response time of the protection circuit is also introduced.
为了提高测量精确度，减少随机误差，对噪声峰值测量应采用统计平均方法，所以也需要一定的测量时间。
In order to increase the measuring accuracy the sample averaging method must be introduced, so that a certain time of measurement is needed.
介绍了渡越时间相关测量方法的基本原理与测试系统组成。
In this paper, the principle of transit time correlation method and the constitution of measurement system are presented.
介绍了渡越时间相关测量方法的基本原理与测试系统组成。
In this paper, the principle of transit time correlation method and the constitution of measurement system are presented.
应用推荐