并对设计原则，方案对比分析和施工特点进行了阐述。
Meanwhile, the principles for design, contrast analysis of the plans and the construction characteristics were also presented.
简要地对比分析了相邻桩之间不同视搭接宽度的两种方案。
Two different plans of apparent connection length between near pile are briefly contrasted and analyzed.
最后，通过对几种布孔方案进行对比分析，找出了射孔套管的优选布孔方案。
Optimized scheme for holding perforation is identified by comparing different schemes for holding perforation.
文章通过对旧路路基加宽方案的对比分析，提出了旧路加宽综合处治的优选思路及其依据。
After a comparative analysis on the plans of widening the roadbeds of old roads, the paper proposes the optimization of comprehensive treatment.
通过对连云港地区三个不同类型软土地基深基坑支护方案的对比分析和研究，揭示不同支护方案的使用规律。
Through comparative analysis and study of three different supporting plans for deep foundation of soft ground in Lianyungang, the paper reveals rules in using each plan.
对于不同拼接方案，对比分析新旧桥拼接后结构内力及位移的变化情况。
As to different link schemes, comparative analysis on changes of internal force and displacement after linking was carried out.
本文针对不同的材料和结构，运用FLUX商用软件进行了对比分析计算，提出了磁屏蔽罩的优化设计方案。
This paper did contrast analysis calculations contrapose to different materials and structures by FLUX, and the optimize design was given in this paper.
对当前流行的几种主干网络技术对比分析，给出校区间网络主干连接的最佳方案。
Based on the comparative study of the current popular backbone network technologies, the paper provides the best scheme of network backbone connections between campuses.
并通过改变搅拌器叶轮的设计参数，对模拟结果进行对比分析，提出优化设计方案。
And, by changing some design parameters of mixer impeller, we can compare and analyze the numerical simulation results and present some optimal methods.
本文依托云南碧云大桥的设计方案，对单、双肢箱型高墩进行了详细全面的整体稳定性对比分析。
This article relies on the design of the Yunnan Biyun Bridge for single and double limb box high pier in detail the overall stability of a comprehensive comparative analysis.
通过对支撑轴力实测数据与设计值对比分析，调整了支撑设计方案，取得了一定经济效益。
Through the analysis of support axial stress actual measurement data compared with design numeric, adjust the design scheme of the support and yield good economic returns.
对现有主流负载均衡算法及方案进行对比分析，并通过模拟实验验证了该方案的优势所在。
Compared with other load balancing algorithm and scheme in electronic commerce, simulation results show the advantages of this scheme.
文章以城市定位的逻辑判定和科学分析为基础，通过对可选方案的优劣对比分析，最终遴选出太原城市定位的综合性方案。
On the basis of logical judgement and scientific analysis, paper compares the schemes selected, and certain rational scheme on Taiyuan's urban orientation.
在间接点火方案中对点火火炬为富燃和富氧两种情况进行了对比分析。
For indirect ignition method, the condition of fuel rich ignition torch was studied in contrast with the condition of fuel lean ignition torch.
根据设计条件、周围环境、对填土地基处理方案进行了对比分析，确定了合理的地基处理方案。
On the basis of the design and surrounding conditions, the schemes of backfill soil foundation are discussed, and a reasonable method is determined.
采用CAE技术，对某发动机连杆多种方案进行强度、刚度对比分析，选出最优设计方案，最终达到减轻连杆重量、降低连杆制造成本的目的。
The intensity and stiffness for a few designed project are analysed with CAE technology, and the best project from them is chosen, so as to reduce the weight and cost.
在对比分析各种排样优化技术方案的基础上，本文提出了GASA分布式协同优化算法模型。
Brought forward the GASA distributed cooperating model based on the fully and deeply analyse of all kinds of intelligence optimal approaches.
文中给出了几种SPWM再调制的实现方案，并对比分析了其调节精度和谐波特性。
Several different methods of SPWM re-modulation are also described, and the control precision and harmonics of the technology are analyzed in detail.
考虑引流方案的有关计算结果仍需与模型实验结果进行对比分析，进一步研究以确定有效减阻的关键参数。
Considering the results of leading edge holes examples should be compared with experimental results, and further studies to determine the key parameters of the effective drag reduction.
以滨海平原地带的综合办公楼基础工程设计为例，通过两个方案的对比分析，选用钻孔压浆桩作为基础形式，并分析了该基础的应用效。
Foundation formed by high pressure bored piles is choosed, and application effect of such foundation is also analysed in the paper.
借助数值模拟软件FLAC3D对支护方案进行了对比分析，并提出了合理的支护方案。
The numerical model with FLAC3D is employed to compare the support schemes and a reasonable support scheme is put forward.
针对各种改造方案所需的条件，进行各方案的对比分析。
For all the necessary conditions, reconstruction schemes made a comparative analysis.
文章对该技术方案、工程效果进行了介绍，并将本技术与同类技术特点进行对比分析和探讨。
The technical scheme and engineering effect was introduced, with analysis of characteristics with other similar techniques.
基于低比速离心泵is 50 - 32 - 160模型，对有、无分流叶片的设计方案全流场进行了数值模拟和对比分析。
Based on the low-specific speed centrifugal pump model of IS 50-32-160, two impellers are designed with and without splitter blades.
采用非线性时程分析和弹塑性静力分析，对钢支撑和粘滞阻尼支撑两类支撑的连续与非连续布置共四种支撑方案进行对比分析。
Nonlinear time history analysis and Pushover analysis are adopted to study steel brace and viscous damper brace systems with continuous layout and discontinuous layout.
通过对《总配线架》新旧标准的对比分析，结合机房安全对保安单元着火现象进行了初步分析，提出了如何提高MDF保安单元的质量，并对MDF保安单元的整改更换方案进行了总结。
It analyzes the contrasting old and new standards of MDF and also the reasons for its being on fire and puts forward the ways to improve the quality and the schemes to reestablish it.
对这两种方案进行了对比分析，并建议对福清湾深水港址方案进行两项前期工作。
The comparison and analysis between the two proposals are made and it is proposed the two items of early stage work for the proposal of deep sea harbour location, Fuqing Bay can be done.
⑤ 最后，对优化方案进行实验验证，并对结果进行对比分析，可以看出该方案有助于提高交叉认证的效率。
The experiment result is analyzed and contrasted against other algorithms. A conclusion can be drawn that the optimized scheme can redound to heighten the efficiency of cross-certification.
⑤ 最后，对优化方案进行实验验证，并对结果进行对比分析，可以看出该方案有助于提高交叉认证的效率。
The experiment result is analyzed and contrasted against other algorithms. A conclusion can be drawn that the optimized scheme can redound to heighten the efficiency of cross-certification.
应用推荐