粗光栅线位移传感器有很多优点，必须加上数控转换器后，才能与流行的数控系统接口。
The coarse grating linear displacement measuring Sensor has many advantages. But only with a numerical control converter, it can be interfaced with current NC machine tools.
设计的基于CAN总线的数控系统接口具有集成度高、结构灵活、可扩展性好、性价比高等特点。
The system given here has many characteristics, such as high integration rate, flexible structure, good extension, high ratio of price to performance, and so on.
分析了实验台的控制原理，并以此为基础完成了伺服驱动与数控系统接口单元的PCB原理图设计。
Control principle of the platform is analyzed, on the basis of which, PCB drawing of interface unit between servo-driver and CNC system is designed.
设计的数控系统接口具有传输距离远、结构灵活、抗干扰能力强、可扩展性好、易于网络化等特点。
The CNC interface given in this paper has many characteristics , such as far transfer distance, flexible structure , high anti-jamming capability , good extension , easy being networked, and so on.
设计的数控系统接口具有传输距离远、结构灵活、抗干扰能力强、可扩展性好、易于网络化等特点。
The CNC interface given in this paper has many characteristics, such as far transfer distance, flexible structure, high anti-jamming capability, good extension, easy being networked...
在分析多种数控系统通讯接口的基础上，研制了实用的DNC数控系统。
DNC system is developed on the basis of analyzing of the features of communication interfaces of many NC systems.
该方法避免了开发usb接口驱动程序，传输速率快，可靠性高，很好地满足了数控系统的实时性要求。
The method avoids developing USB interface driver, has high communication rate and high reliability, and satisfies NC system's real-time demand very well.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
介绍了西门子810数控系统D NC接口的设计方法。
This thesis introduces the design of DNC interface of Sinumerik 810 CNC system.
实践证明，基于PMAC的数控系统完全可以实现人机接口的定制和实时控制部件的参数化。
The practice shows that the PMAC-based CNC system has realized customerization of man-machine interface and parametrization of realtime control elements.
主要介绍SERCOS总线的通信模型、接口、协议、数据报结构和工作原理及其在数控系统中的应用。
The communication model, interface, protocol, message structure and work principle of SERCOSBus are presented and also its application to the numerical control systems is introduced.
介绍一种实用的数控系统键盘及其接口电路硬软件。
论述西门子840DE数控系统的接口形式、文件存储机理，提出它与微机间的硬件联接及软件编程方案。
The thesis discusses the interface of 840DE numerical control system made in siemens, and the mechanism of storage . It further put forward a way of communication between it and microcomputer.
并在此基础上进一步研究了基于PCI接口的数控系统。
On this basis, the paper discusses the CNC system based on PCI bus interface.
阐述了软件芯片的特点、功能划分和接口，并以所开发的镗铣床数控系统为例，对基于软件芯片的开放式数控系统的重构过程给予了详细阐述。
Apply the theory of software reuse to the development of nc system, draw the definition of software IC conception, give an expatiation on the functions and interfaces of software ICs.
该数控系统是一种用PMAC卡实现前台实时运动控制，IPC机实现后台管理及人机界面接口的开放式、模块化数控系统。
It is an open and modularization NC system, which realizes real-time movement control by PMAC, and background managing and man-machine conversation by IPC.
通过分析数控系统和数控代码的特点建立基于代码的加工仿真接口，提出代码翻译的基本思路。
An interface based on NC codes for processing simulation is built by analyzing numerical system and NC codes, a general idea of code translation is developed.
介绍了数控系统的硬件设计，并采用LINUX操作系统和NIOS软处理器，着重讨论了硬件的接口设计。
The hardware design of CNC system was introduced which adopts LINUX operation system and NIOS soft processor, and the hardware connections were discussed.
以往数控系统与设计系统的接口信息采用的是ISO 6983标准，即采用G、M代码的数控程序。
Previous interface information between CNC system and design systems is the ISO6983 standard, that is, using g, m code of the NC program.
本文给出了结合现行数控系统通用规范而自行开发设计的数控系统控制程序、通讯接口及硬件电路。
In this text, the NC system control program, communication interface and circuit diagram designed by self are released, which combine with CNC ISO standard.
利用FANUC0数控系统具有RS 232c接口与计算机联网，实现数控机床与计算机间的通讯，进行数控系统参数、报警信息和加工过程状态信息提取。
Connect the RS232C of FANUC0's NC system and computer's interface, realize the communication among machine tool and computer. Pick up the information of parameter in the system and alarm information.
本文针对以太网应用于数控系统数字接口进行了深入研究，主要涉及同步性、实时性、可靠性和相关的协议等内容。
This dissertation makes deep research on the application of Ethernet in nc system digital interface. The synchronicity, real-time, reliability and relevant protocol are mainly concerned in this paper.
本文主要描述计算机数控系统开关量接口原理，接口的软件诊断方法及程序编写技术。
The principle of on-off interface of CNC system, the software diagnosis and the programming technique for the interface are described.
在应用于实际生产之前，数控系统需在接口配套的数控设备上进行反复测试。
Before applying in the practical production, NC system must be tested time and again on the NC devices which have compatible interfaces.
在应用于实际生产之前，数控系统需在接口配套的数控设备上进行反复测试。
Before applying in the practical production, NC system must be tested time and again on the NC devices which have compatible interfaces.
应用推荐