在开环数控系统中采用数据采样法插补，可以有效提高系统性能。
Though time-slicing interpolation used in Open-loop CNC can prompt system performance effectively.
研究以数控机床ICAID系统中色彩设计过程为对象，进行了色彩意象尺度法实验和对设计者设计认知过程实验。
Aimed at the color design process of NC machine tools in ICAID system, experiments of color image scale and the cognitive process of designers were carried out.
同时，通过对一台数控铣床的测量后，发现激光干涉仪测量法更适合于机床定位精度的快速评定。
Meanwhile, we found that the latter one is more suitable for measuring machine tools linear positioning accuracy after inspecting a vertical milling machine by using the laser interferometer.
定点式双向螺距补偿法应用在数控系统中。
The positioning bidirectional pitch compensation method is applied in NC system.
为提高整体叶轮叶片数控加工的效率和质量，提出了一种分片侧铣加工法。
To improve the efficiency and quality for numerical control of machining of integral impellers, a new method, i. e. flank milling on divided pieces, was put forward.
运用故障总时间法初步确定数控冲床的故障概率模型。
The model of the failure probability distribution was obtained by applying total failure time method for the numerical control punch.
本文基于刀刃曲线方程，推导了球头等法前角前刀面的几何模型及其数控磨削模型。
Based on equation of cutting edges, new geometric model and NC grinding model of rake face of ball end mill with constant normal rake Angle are modeled.
本文阐述了数控最佳插补运算方法——最近距离法的插补原理。
This paper Discusses the optimal interpolation and the deviation analysis the numerical control process.
只要已知被加工曲面的参数表达式，就可运用点涉法在该曲面上生成非球面刀的数控加工轨迹。
As soon as the parametric representation of the sculptured surface is known, the NC machining path on it is determined for the nonspherical cutters.
本文介绍了逐点比较法插补圆弧的运算过程，并对逐点比较法插补圆弧的算法进行了改进，为数控系统插补软件的设计提供了参考。
This paper introduced the algorithm process by using point by point comparing method, improved algorithm of interpolation arc, and provided a design method of NC system interpolation software.
通过验证试验确认了田口法在木制品数控加工中应用的有效性。
The application of Taguchi method in woodwork numerical control processing has been validated by using a confirmation experiment.
把隐函数的优势应用到数控加工编程中，即对于截面法的数控加工，求出刀具切削平面与隐函数曲面的加工轨迹，再用正负法绘制刀具轨迹曲线。
For NC machining of plane section method, the machining path of tool cutting plane and implicit surface can be found, and the curve of the tool path is drawn by the positive-negative method.
斜航式法向圆弧锥齿轮数控加工实验表明，该锥齿轮数控加工原理正确，工艺简单，且加工精度较高。
The experimental results of machining actual workpiece prove that nc machining principles are correct, technology is simple, and the machining precision is high.
同时，利用工作研究分析法，对数控机床的使用操作过程进行了研究。
And then this thesis makes a work study of the process of operating NC machine tools.
逐点比较法是轮廓插补算法之一，曾在数控机床中被广泛采用，但由于它存在不能实现两轴联动的缺点，限制了其应用。
Point-by-point Comparison interpolation is one method of the contour interpolation algorithms, ever used widely in CNC machine tools, but its being not to realize two-axis limits its application.
异形螺杆的加工一般采用成型法及无瞬心包络铣削方法在专用数控铣床上进行。
The special screw is manufactured with the molding method and non-instantaneous envelope method on the numerical control millers generally.
文章以BKX - I型变轴数控机床为研究对象，利用矩阵结构分析法建立了变轴数控机床的静刚度计算模型。
In this paper, by using the method of matrix structural analysis, the static stiffness model are derived from researching BKX-I varied-axis NC machine tool.
文章结合编程实例介绍了球弧数控车削三种常用的工艺方法，即车圆法、移圆法、车锥法。
This paper introduces three kinds of CNC turning method combined with practical example, concentric circle turning, center shifting turning and taper profile composition turning.
提出了采用时间序列分析法进行机床热误差建模的基本原理及方法，及其在数控机床热误差补偿建模中的应用。
The basic principle and method of time series analysis and its application in thermal error modeling on NC machine tools were presented.
应用等距偏移曲面法计算出曲面数控精加工刀位数据，并通过控制切削残留高度的方法求得切削行距。
The finish cutter location data were computed using the equidistant offset surface method, and the machining row distances were acquired by the control of the residual height.
基于计算机数控系统中逐点比较法的基本思想，提出一种新的插补算法。
Based on the basic principle of point by point comparison, a new interpolation algorithm is presented.
采用创建的万能输入法，通过操作数控设备的控制面板，实现了异构数控系统的有效集成。
The different NC systems can be availably integrated by using the new standard and operating the control panel of the NC equipments.
基于计算机数控系统中逐点比较法的基本思想，提出一种新的插补算法。
According to the basic mechanism of point to point comparing method, a new interpolating recurrence algorithm is proposed.
在数控插补程序中，应用了最小偏差法进行插补计算。
The Least Difference Theory was applied in the interpolation program.
根据钛合金曲面数控铣削加工特点，利用正交试验法优化钛合金曲面开槽用球头立铣刀的几何参数。
Based on the features of NC milling on ti alloy curved faces, the geometric parameters of ball end mills for fluting on ti alloy curved faces are optimized by using orthogonal test method.
截面线法是数控加工中重要的也是应用较为广泛的一种刀具轨迹的生成方法。
The method of curves of cross sections is one of the important and popularly applied ways in generation of tool path in NC machining.
提出了数控系统中一种新的指数升降速控制曲线算法-加权补偿法，该算法用加权平均及权值修正技术，解决了数控系统中指数升降速控制曲线不能任意动态调整的难题。
This algorithm USES weighting mean and modified weight to solve the problem of that the exponential curve of acceleration and deceleration could not be dynamical adjusted freely in CNC.
提出了热工专业中特殊的变参数控制系统的定参数频率设计法，应用计算机进行了仿真计算并进行了实际系统的测试。
A design procedure with constant parameter frequency method is developed for the temperature control system with variable parameter applicable especially to thermodynamics.
针对数控激光仿形中出现的杂散点问题，提出了误差评定区域法。
The article bring forward a viable means aim at the problem that desultory point exist in the laser profile data.
针对数控激光仿形中出现的杂散点问题，提出了误差评定区域法。
The article bring forward a viable means aim at the problem that desultory point exist in the laser profile data.
应用推荐