本文作者采用数学模拟法求出这些参数值。
In this paper, the author attempted to obtain these characteristic parameters by using mathematical models.
结果表明数学模拟值与实验观察值基本吻合。
The results showed that the mathematically simulated values were in agreement with the observed values in rats.
它可以应用于数学模拟或在线实时飞行模拟。
It can be used both for analysis, and for on-line real-time simulations.
热力系统分析研究的主要方法是数学模拟和综合优化。
Mathematical simulation and synthetical optimization are main methods of thermodynamic system.
对大庆石脑油裂解炉反应管用二维模型进行数学模拟。
The tubular reactor of Daqing naphtha pyrolyzer is simulated by a two-dimensional model.
本文讨论了一种新的绘制标准曲线方法——数学模拟法。
This paper presents a new way of drawing standard curve -mathematical imitation.
采用数学模拟的方法，建立熔窑池壁砖内部的温度场模型。
Using a mathematical analogue meth - od, an internal temperature field model of the pool wall bricks is set up.
吸附床的数学模拟采用沿吸附床周向的一维均匀压力场模型。
The numerical simulation of adsorbent bed has adopted one-dimensional uniform pressure field model along the circumference.
进而经过数值计算和数学模拟，得出了燃烧反应的动力学参数。
Numerical calculation and mathematical imitation were carried out upon experimental results.
选点修改利用左右两旁的点，这是一种“两借借”的数学模拟。
Selecting some points for modification means taking advantage of the points on both sides.
同时对超声波提取进行了数学模拟，模拟值与实验结果吻合良好。
Then the mathematic simulation was conducted, and the result was consistent with the experiment result.
用数学模拟方法研究广西龙州县金龙水库的水量补给、调蓄及排泄。
The water recharge, regulation and discharge is modelled mathematically in Jinlong reservoir, Longzhou county, Guangxi.
建立焊接瞬态温度分布数学模型，解决焊接热源移动的数学模拟问题。
The mathematic model of transient thermal process in welding is established to simulate the moving of the heat source.
重点讨论了常用一维管状光声腔体的光声理论，并给出了数学模拟模型。
This work focuses on the one-dimension PA cell and has given the model simulation of it.
三维非平衡混合池模型是一种新的对实际精馏过程进行数学模拟的方法。
The three-dimensional nonequilibrium mixing-pool model is a new method for simulating actual distillation processes.
地下水动力作用的研究方法可概括为数学模拟法、数值模拟法和实验模拟法。
The underground hydrodynamic force function research technique may summarize is mathematics analogue method, the value analogue method and the experimental analogy method.
结构设计、内外弹道、数学模拟都取得了重大突破，已达动态发射试验阶段。
The critical breakthroughs have been taking place in the structural designs, internal and external ballistics, and mathematical models, and it is now in dynamic firing test phase.
温度升高，水含量增加，则氯流失速度加快，还对氯流失规律进行了数学模拟。
Thehigher both temperature and water content, the faster the chlorine loss. Furthermore, the mathematical simulation for the rule of chlorine loss was carried out.
地下水脆弱性评价方法主要有三类：迭置指数法，过程数学模拟法和统计方法。
There are three major classes of groundwater vulnerability assessment methods: overlay and index methods, methods employing process-based simulation models and statistical methods.
本文用物理模拟与数学模拟相结合的方法探讨了闭锁区附近的应变场及其演化。
Combining the physical and mathematical simulations the strain field and its evolution near locked region are studied.
虽然我知道自己已是大不如前，但第一次数学模拟测验的成绩还是让我吓了一跳。
I expect my mental skills to be rusty, but I'm not prepared for the results of my first math practice test.
提出一种对工业塔，尤其是大塔径精馏塔进行数学模拟的实用方法非平衡级双区模型。
A new mathematical model, designated as two-zone nonequilibrium stage model, for simulating an industrial distillation tower, especially the tower with large diameter is presented in this paper.
通过催化柴油氧化与萃取脱硫实验和液液相平衡数学模拟，考察了不同溶剂的脱硫性能。
The mathematical simulation of solvent performance in FCC diesel desulfurization through oxidation and extraction was investigated in this paper.
本文利用等温吸附的线性关系，对苯酚在土壤层中的吸附动力学过程进行数学模拟研究。
A mathematical model of adsorption of phenol in soil has been studied using linear function of adsorption isotherm.
具备自定义曲线校准功能，预存高精度全数学模拟工作曲线，确保直读浓度值的准确性。
With custom curve of calibration function, stored high precision complete mathematic simulation curve, ensure the direct-reading concentration value accuracy.
本文应用联立模块法的模拟策略对乙烯氧化制环氧乙烷过程进行了操作型稳态数学模拟。
The process of epoxyethane production by ethylene oxidation is numerically simulated by using the steady operation technique with simultaneous modular approach.
通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。
In this paper, the CAM explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the CAM.
本文提出了使用半经验半理论方法对山区各气候要素的空间分布进行数学模拟的有效方法。
In this paper, an effective method of simulating the distributions of climatic elements in mountainous areas by using semiempirical theory is presented.
应用电子计算机对两种理想流动模型的苯乙烯本体热聚合反应器进行了初步数学模拟试验。
Mathematical simulation has been performed by means of electronic computor for two types of ideal flow reactor systems used for the thermal bulk polymerization of styrene.
应用电子计算机对两种理想流动模型的苯乙烯本体热聚合反应器进行了初步数学模拟试验。
Mathematical simulation has been performed by means of electronic computor for two types of ideal flow reactor systems used for the thermal bulk polymerization of styrene.
应用推荐