用实验及数值模拟方法研究了电磁内爆套简的屈曲响应规律。
The dynamic buckling of the implosion liners driven by magnetic pressure has been investigated experimentally and numerically.
采用随机数值模拟方法和功率谱密度函数生成随机轨道粗糙度。
The random rail roughness samples are yielded using random numerical method and power spectral density function.
本文使用数值模拟方法研究了吸气效应对分离的控制及增升作用。
The suction effect on separation and lift force are studied by numerical method.
用数值模拟方法研究了金属管道裂纹尖端磁通量密度的分布情况。
The magnetic flux density on the crack tip in a metal pipeline was studied by numerical simulation method.
用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
The effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
研究了飞机外挂物投放问题的数值模拟方法，并应用于安全性设计。
A numerical simulation method on aircraft store separation was studied and applied in safety design.
运用数值模拟方法得到了在参数空间中相应的混沌区域和混沌轨道。
The corresponding chaotic region and orbits in parameter space are described by numerical simulations.
用数值模拟方法研究了聚焦离子束系统中微波离子枪的束光学性能。
The ion beam optics of a microwave ion gun for a focused ion beam (FIB) system is investigated numerically in this article.
用数值模拟方法研究了金属裂纹尖端的温度场和热应力场的分布情况。
The temperature field and thermal stress field on the crack tip in a metal was studied by numerical simulation method.
基于数值模拟方法的风速时程曲线在桥梁结构风振分析中被广泛采用。
Wind speed time series obtained with numerical simulation methods are adopted in structural analysis of wind-induced vibration.
在试验研究的基础上，采用数值模拟方法研究了蒙皮单元的剪切性能。
Based on test, numerical modeling method is adopted to simulate the shear behavior of the basic panel.
方法利用数值模拟方法，对水平井注蒸汽的开发、布井方式等进行研究。
Method Steam injection development and well pattern of horizontal Wells were studied by using numerical simulation.
利用数值模拟方法计算了双水套中水的流场分布，确定了关键的设计参数。
Calculates the distribution of inside water flows with numerical simulation, determines the key design parameters.
运用数值模拟方法对连接盘的成形过程进行模拟，对其传统工艺进行优化。
Using numerical simulation method, the forming process of joint tray was simulated, and its tradition technology was optimized.
采用数值模拟方法对机翼型及板型叶片的轴流风机的气动性能进行了比较。
By numerical simulation method, the comparisons of aerodynamic performance between airfoil and plate blade axial fans were made.
介绍了用格子玻尔兹曼方法模拟非均匀介质中的电场响应的数值模拟方法。
A numerical method for simulating electric field response in the inhomogeneous medium is introduced using lattice Boltzmann method.
用微分方程分支理论和计算机数值模拟方法研究广义CH方程的周期波解。
The periodic wave solutions of the generalized CH equation are investigated by using bifurcation theory of differential equations and numerical simulations.
采用数值模拟方法分析了不同工艺因素对RH精炼中夹杂物去除过程的影响。
The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser.
针对塑料注射成型工艺的特点，提出了残余应力和翘曲变形的数值模拟方法。
A numerical study of residual stresses and warpage was undertaken according to the characteristics of plastic injection molding process.
利用防护热箱法和数值模拟方法得到了砌块热绝缘系数最大时的砌块的结构。
The parameter of the block is gained when its thermal resistance value is maximum by the guarded hot box and the numerical simulation.
采用计算机数值模拟方法研究了某钢筋混凝土底框架商住楼柱子的耐火稳定性。
The fire stability of the columns of bottom reinforced concrete frame business living building is studied by means of numerical simulation.
随着计算机性能的不断提高，数值模拟方法在湍流研究中的重要性也在不断增强。
With the development of computer performance, numeric simulation method plays more and more important role in turbulence research.
采用数值模拟方法，研究了纵流式换热器和折流板式换热器流场和温度场的分布。
The distribution of the temperature field and flow field in longitudinal-flow heat exchanger is explored by numerical method.
采用数值模拟方法，对新浇混凝土灌注桩在爆破振动作用下的动态响应进行了分析。
The dynamic response of fresh concrete filling pile under blasting load is studied by numerical simulation in this paper.
利用非线性时域有限差分数值模拟方法，得到了高斯脉冲激励下的双稳态响应曲线。
The bistable hysteresis loops with Gaussian pulse pumps is obtained by using nonlinear FDTD method.
以实际产品为研究对象，将三维数值模拟方法应用于柴油机螺旋进气道的改进设计中。
Three-dimensional numerical simulation method is used in the design of a diesel engines helical intake port for the practical product.
给出了一种分析有介质加载的不同栅格外形双层频率选择表面电磁特性的数值模拟方法。
A numerical simulation approach analyzing electromagnetic characteristics for dielectric-loaded double-layer frequency selective surfaces (FSS) with dissimilar lattice geometries is presented.
研究了由涡度诱导出的速度场，采用数值模拟方法，讨论了矢量场的分布和几何拓扑性质。
The velocity field resulting from vortex flow is studied. The vector field distribution and geometry topology characteristic are discussed by means of numerical simulations.
研究了由涡度诱导出的速度场，采用数值模拟方法，讨论了矢量场的分布和几何拓扑性质。
The velocity field resulting from vortex flow is studied. The vector field distribution and geometry topology characteristic are discussed by means of numerical simulations.
应用推荐