最后结合数值模拟分析的方法，对模型试验的结果进行验证。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
数值模拟和分析表明，该光子晶体光纤在色散补偿型光纤方面具有广泛的应用前景。
The numerical simulation and analysis show that this type of PCF will find extensive applications in dispersion compensation fibers.
用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
本文基于最优化理论，利用模拟电荷法对一个小型的交叉场天线（CFA）进行了场的数值分析，得到CFA周围的电场、磁场及玻印廷矢量的分布。
In this paper, we introduce the basic theory and the design of CFA, and analyze the field of CFA by CSM on the basis of method of optimization.
并通过三维电磁场软件进行了数值模拟，模拟结果与理论分析所得结论一致。
The formula of the electric field distribution through CST and the numerical simulation, simulation results with theoretical analysis concluded unanimously.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
对阿基米德螺旋线调制斩波器的曝光效率进行了理论分析和数值模拟，得到斩波器曝光效率对后续信号处理的影响。
The Archimedes spiral cord modulating chopper's exposure efficiency was theoretically analyzed and numerical simulated, and its impact on the following signal processing was obtained.
为了调查浅水效应，还进行了浅水中的鱼尾状摆动的数值模拟和稳定性分析。
To investigate into shallow water effect, numerical simulations of the fishtailing oscillation in shallow water and stability analysis have been carried out.
锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
分析和数值模拟了用瞬态简并四波混频实现光学啁啾反转的器件的主要参数对恢复信号波形和脉冲宽度能力的影响。
The influence of the principal parameters of optical chirp reversal devices on ability to restore signal wave form and pulse duration has been analysed and simulated.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
通过计算机数值模拟，得到了单速车道和多速混合车道元胞自动机交通流模型的基本图，并对这两种模型的交通流特性进行了分析和讨论。
Via computer numerical simulation, the fundamental diagrams of the single-speed lane and multi-speed lane CA traffic flow models are got, and these two models' traffic flow characters are presented.
对环板行波管的导波特性进行了详细的数值模拟分析。
A detailed numerical calculation for the propagating wave's dispersion characteristics has been made.
理论分析、数值模拟和实验结果一致。
Theory analysis and numerical simulation well agree with the experiment results.
达到了地质分析与数值模拟相互引证的目的。
Both geological analysis and numerical simulation can be firmed each other.
通过数值模拟结果之间的对比分析，揭示出岩石试样宏观破坏模式随细观层次上韦伯分布参数的变化而不同。
It has been revealed by the comparison of numerical simulation results that the macro-failure modes of rock samples are different according to parameters of Weibull distribution at mesoscale level.
通过数值模拟分析不同因素对激光多点点火的影响。
Through the numerical simulations we analyze the influence on laser ignition under the different factors.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
基于入和没入硬层时有限元数值模拟对比分析和持力层不同时同场地现场对比试验资料分析，对大直径超长灌注桩的承载潜力问题进行了探讨。
Based on the field loading tests and FEM numerical simulation analysis, the paper probes into the potential bearing capacity of large diameter and super-long bored-cast-place piles.
由对数值模拟与试验的结果分析得出：（1）青藏高原地形有利于高原东麓暴雨区的扩大与强度加大。
Some results are obtained as follows: (1) The heavy rain area is expanded and heavy rain is enhanced by plateau terrain in the east of plateau.
本研究对各种工况下主轴的应力应变场进行数值模拟分析，并对主轴应力集中区域的力学性能进行了分析和研究，为进一步的疲劳分析提供了依据。
The stress-strain field of winder axle in various working conditions is analyzed and mechanics performance of stress concentration region is studied, which provides reference for its fatigue analysis.
针对重力式网箱数值模拟中波浪理论选择问题进行了专门的分析与讨论。
A special discussion is carried out to analyze the wave theory selection in the simulation of Gravity cage.
数值模拟和疲劳分析。
通过计算机数值模拟的方法分析了工艺参数对聚丙烯（ PP）纤维直径的影响。
The effects of process parameters on PP fiber diameter were analyzed by computer data simulation.
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
应用推荐