给我一个支承的支点，我就会搬到地球。
Give me a fulcrum on which to rest, and I will move the earth.
对电磁辅助支承的被动式控制减振进行了研究。
Researched the passive vibration reduction capacity of auxiliary electromagnetic support.
结果证明：各力矩符合回转支承的各项参数要求。
The consequence Proof: this kind of support of mutation each item parameter suit requirement.
研究了非线性径向轴承支承的转子系统的动力行为。
Dynamic behaviors of a rotor system with nonlinear journal bearing supports were analyzed.
提出了一种将滚动体模拟成非线性弹性支承的新方法。
A new method is approached here by simulating the action of rolling elements with nonlinear elastic supports.
本方法还可应用于两端边弹性支承的空间梁板结构分析。
This method can also be used for other structural analysis of beams and plates with elastic supports in both ends.
实验室采用陶瓷球轴承作支承的电主轴做高速精密磨削。
We adopt the ceramic bearing electric spindle to achieve high speed and precision grinding.
分析了这种橡胶支承的减振机理、减振类型和结构特点。
In this paper the damping mechanism, damping types and constructional features of the rubber mounting are analysed.
谐振陀螺是一种不存在高速转子和活动支承的新型陀螺仪。
The resonator gyro is a new type of gyro without spinning-wheel and bearing.
通过对声辐射理论的研究，获得超声无触点支承的理论依据。
The theory basis of ultrasonic contactless support is achieved by studying the sound radiant theory.
研究了具有滑动轴承支承的平衡转子系统的非线性动力行为。
Nonlinear behaviors of balanced rotor dynamical system with sliding bearing supports were analyzed.
基于静压支承的思想，提出双阻尼效应柱塞副来提高其抗卡紧能力。
Based on the theory of hydrostatic bearing, the piston pairs of double-damping effect were presented to improve its anti-chucking ability.
研究径向主动电磁轴承支承的不对称转子系统的动力行为及稳定性。
Stability and coupling dynamic behaviors of a journal active electromagnetic bearing rotor system are analyzed.
本文对水压滑靴静压支承的原理、特点、结构设计和支承性能进行分析和讨论。
The principle, the characteristics, the structure design and the supporting performance of sliding shoes hydrostatic bearing of water hydraulic pump are analyzed and investigated in this thesis.
将顶板视为中点有支承的弹性固结梁，将煤柱视为支座，形成了顶板-煤柱系统。
The roof of cavern is regarded as an elastic beam with support at the midpoint and the coal pillars are regarded as bearings so as to establishing a cavern roof-coal pillar system.
本文所得图表和结论对于管路系统弹性支承的位置设置提供了理论上的参考依据。
The diagrams and conclusions offer theoretical reference for the position optimizing of the pipe systems supports.
主要叙述了数控进给系统的传动设计及主要传动件滚珠丝杠及其支承的设计计算。
It specifies the driving design and important driving accessory -ball bearing and it, s bearing of the entering system of NC machining center.
通过数值仿真和实验研究远轴端eord支承的单盘柔性转子系统的不平衡响应。
Numerical simulations and experimental investigates were carried out for unbalance response of a single disk flexible rotor system with far shaft end mounted on EORD.
本文详细考察了滑动轴承支承的转子不平衡质量的大小及分布对系统稳定性的影响。
This paper studies in detail the effect of magnitude and distribution of rotor unbalance on the stability of rotor-journal bearing system.
首先，本程式让你自己决定作用在梁的力的数量然后让你决定是否要指定支承的位置。
The program first lets you decide the number of loads to add to a beam and then lets you choose whether or not you want to position the supports.
介绍了一种采用静压支承的曲轴连杆式低速大转矩液压马达滑靴副的高压化设计方法。
A high pressurized design method of slipper pairs of a new type camshaft connecting-rod low speed high torque motor was put forward.
平台和运载器的方位角是根据由水平环架支承的方位速率陀螺讯号借助积分运算得到的。
The azimuth angles of platform and vehicle will be obtained by an integrator from azimuth rate signals measured by an azimuth gyroscope supported on a horizontal gimbal.
根据短壁开采条件下保护煤柱的布设特点，建立由保护煤柱支承的关键层力学分析模型。
The mechanical model of key strata supported by coal pillar is set up according to the layout of coal pillars in the coalface of short wall mining.
利用特解边界元法，对具有域内支承的薄板问题建立了边界积分方程，并进行了数值求解。
In this paper, the particular solution BEM is used to get the numerical solution for thin plate with supports in the domain.
研究了具有多个弹性支承的弹性简支杆在切向均布随从力作用下的动力特性和稳定性问题。
The dynamic behavior and the stability of simply supported elastic rods with internal elastic supports under the action of uniformly distributed tangential follower force are investigated.
运动学模型中存在的一个问题是未考虑悬架刚体的变形、橡胶支承的变形及各结构之间的间隙。
Kinematic model is an issue exists in suspension rigid body does not take into account the deformation of the deformation of rubber bearing gap between the various structures.
在传动轴启动和停转的过程中，软支承的摆架会有非常明显的振动，硬支承的摆架则没有这种现象。
During the start and stop of the drive shaft, the swing frame of the soft support will have a very obvious vibration.
本文通过分析装退套机的工作流程，提出装退套机辅助支承的解决方案，并设计出辅助支承的结构。
This article puts forward the solution of the assistant support with the machine and designs the structure by analyzing the process of the machine.
从简支梁定义出发，应用有限元法，对结构、受力对称的简支梁以及不同支承的对称梁进行了计算。
Based on the definition simple beam, the finite element method is used to analyse some simple beams, with symmetric structure and loading, and symmetric beams, with different support.
从简支梁定义出发，应用有限元法，对结构、受力对称的简支梁以及不同支承的对称梁进行了计算。
Based on the definition simple beam, the finite element method is used to analyse some simple beams, with symmetric structure and loading, and symmetric beams, with different support.
应用推荐