液压系统选用插装阀集成控制系统，插装阀集成控制系统具有密封性好，通流能力大，压力损失小等特点。
Hydraulic systems use cartridge valve integrated control system, integrated cartridge valve control system has good sealing, flow capacity, small pressure loss characteristics etc.
液压系统采用了先进的二通插装阀系统、进口高性能的电子泵技术，实现了主缸压力与流量的双闭环控制；
The press takes use of advanced two-way cartridge valve system and imported electric pump technology which can realize double closed loop control of pressure and flow rate.
本文以数字阀、插装阀并联电液系统为例，分析了智能时间次优控制方法。
Concerning for the electrohydraulic system with digital valve and cartridge valve, this paper analyzes the intelligent time suboptimal control.
大部分平衡阀采用截止阀结合抛物线(插塞)阀瓣。
Most Balancing Valves are globe style and incorporate a parabolic (plug) shaped disc.
根据结构特点有挡板阀、插板阀、蝶阀、球阀、隔膜阀、角阀、直通阀、三通阀。
According to structural characteristics of a flapper valve, flapper valves, butterfly valves, ball valves, diaphragm valves, Angle valves, through the valve, three-way valve.
研究了插装阀在支架液压系统中的应用前景，设计了采用插装阀的某支撑式液压支架的液压系统，并分析了工作原理。
The application prospect of plus-in valve in hydraulic support was studied. A chock-type hydraulic support equipped plus-in valve was designed, and the working principle was analyzed.
介绍了该新型程控液压模锻锤结构特点、参数计算、性能分析、插装阀集成开式液压系统和PLC程序控制系统。
In this paper, the structural characteristics, parameters calculation, performance analysis, open loop hydraulic system with integrated plug in valves and PLC control system are presented.
本文采用滑阀系统图等效成插装阀系统图的方法，设计出一种由二通插装阀组成的典型闭式系统。
The paper USES spool valve system drawing equivalent to cartridge valve system drawing to design a typical hydraulic closed-circuit system consisting of two-way cartridge valve.
讨论了插装阀串在液压支架液压系统中的应用依据和前景，提出了设计方案，分析了工作原理。
The usage basis and prospect of valves sticked together in support hydraulic system are discussed, design plan and analyses work principle is put forward.
介绍了眼镜式插板阀的性能，分析了该阀门的密封特点，提出了改进密封结构的方法。
Introducing the properties of goggle type board Plug valve, analyzing the characteristics of the valve, proposing the methods of improving sealing structure.
液压控制采用插装阀集成系统，动作可靠，使用寿命长，液压冲击小，减少了连结管路与泄漏点。
Hydraulic control adopt insert type compact valve system, with reliable operation, long service life, minimized hydraulic shock, minimized duct connection and possible leak point.
我厂生产的插装阀性能可靠。
简述了管端收口机液压系统的设计与调试过程，并总结了设计中二通插装阀的使用经验。
The design and commissioning of the hydraulic system for tube necking-in machines are briefed and some experience in using cartridge valves is summarized.
本文根据流体动量理论导出了阀芯关闭过程中液动力的关系式，在此基础上建立了二通插装阀阀芯关闭运动方程。
From fluid flow momentum theory the basic equation of flow dynamic forces in the spool closing process is derived, and the spool dynamic equation of the two-way cartridge valve is established.
讨论了插装阀在电液控制支架液压系统中的应用依据和前景，提出了设计方案，分析了工作原理。
The application prospect of plus-in valve in electrohydraulic control support is studied. A chock-type hydraulic support equipped plus-in valve is designed, and analyzed in working principle.
双（多）车翻车机液压系统是目前插装阀工业应用较为集中的系统。
The double(multiple)-train dump hydraulic system is the system now very extensively utilized in the cartridge valve industry.
当指定用316不锈钢阀时，3c系列承插焊接阀的标准阀体盖也是316 (CF 3m)不锈钢。
The standard body caps of the Series 3c socket-weld valves are 316 (CF3M) stainless steel when a 316ss valve is specified.
介绍螺纹插装阀在阀门液压驱动装置中的应用及选型注意事项。
The application of cartridge valves on valve' s hydraulic actuator, and problems were analyzed when using the cartridge valves.
针对这一问题，阐述了应用流体逻辑理论分析插装阀机能的方法。
To solve the problem, this paper describes the method for analyzing the functions of the cartridge valves with fluid logic theory.
介绍了一种适用于球阀、蝶阀和旋塞阀的斜槽插板升降撑拢式阀门密封结构。
A kind of slope slots and embeded plates hoisting expanding type valve sealing mechanism which is suitable for ball valves, butterfly valves and plug valves is introduced.
由于液压泵的CAD与插装阀，集成块及液压系统的CAD有很大的差别和不同。
The pump CAD has many difference from that of hydraulics system and cartrige block.
液压控制采用整体式插装阀集成系统，动作可靠，使用寿命长，液压冲击小，减少连接管路与泄漏点。
Hydraulic control using integrated cartridge valve system, reliable operation, long service life, small hydraulic shock, reduce the connection pipeline and leak.
液压系统采用插装阀集成系统，动作可靠，电液响应快，使用寿命长。
Hydraulic system adopts cartridge valve system with the features of act reliability, electro-hydraulic quick response and long usage life, as well as independent electronic system and PLC control.
电动或液动插板阀(又称镜子阀)是炼铁鼓风炉煤上呼吸道网的重要切断设施之一。
Electric or hydraulic flapper valve (also known as mirror valve) is the upper respiratory tract iron blast furnace coal facilities off one of the important network.
液压系统采用集成式插装阀控制，动作灵敏、可靠，无渗漏。
Hydraulic system adopts integrated cartridge valve control, flexible action, reliable, no leakage.
介绍了一种适用于球阀、蝶阀和旋塞阀的斜槽插板升降撑拢式阀门密封结构。
A type of dual slots helix hoisting composite valve switch mechanism which is suitable for ball valves, butterfly valves and plug valves is introduced.
电动或液动插板阀通常与非金属密封蝶阀配系运用。
Electric or hydraulic flapper valves are usually equipped with non-metal sealing butterfly valve system to use.
CC Q型气动超高真空插板阀带反馈信号装置。
CCQ pneumatic ultra-high vacuum gate valve With signal feedback device.
CC Q型气动超高真空插板阀带反馈信号装置。
CCQ pneumatic ultra-high vacuum gate valve With signal feedback device.
应用推荐