控制系统采用上下两级控制。
磁浮控制系统采用涡流传感器检测其运行状态。
The eddy current sensor is used in the maglev control system to detect the state of the system.
控制系统采用部分全局的方法规划整个控制过程。
The partial global coordination method was used to program the whole control process.
冷藏集装箱的温度控制系统采用单片微处理器控制。
In every refrigerated container system, a single-chip microprocessor has been used.
该控制系统采用闭环结构，焊接电流、电弧电压为反馈量。
Closed loop structure is adopted in this control system, the current and voltage of welding is used as feedback quantity.
该控制系统采用无级变频电机，这是进行简单工作的经典机器。
The control system adopts inverter with step less motor. It is the classical machine for simple working.
整个生产线控制系统采用PC技术形成两级控制并具有网络化功能。
The system adopts PC technique to form two level control scheme with web function which can be used anywhere without the limitation of the power supply and place.
控制系统采用价格比较便宜的AT89C52单片机作为控制系统主体。
AT89C52 was a sort of cheap Single Chip Microcomputer and was applied to control system of reactive power compensation device.
串级控制系统采用了两个调节器，因此它的调节器的参数整定更复杂一些。
The cascade control system has used two regulators, therefore it is more complex to set its regulator parameter.
控制系统采用双环控制，速度环采用PI转速控制，电流环采用矢量控制。
In the double loop of control system, a PI speed controller is adopted in the speed loop, and a vector controller is used in the current loop.
控制系统采用的是电流型PWM控制方式，能够实现高品质的恒功率能量回馈。
The control system adopts current PWM control mode, and high quality energy feedback with constant power could be accomplished.
控制系统采用瞬时电压单闭环控制策略，以提高高频链逆变电源的动静态特性。
The single close-loop control method of HFL inverter based on voltage feedback was designed for better performance.
详细介绍了控制系统采用的硬件结构和位置环、电流环和速度环三闭环控制方法。
In particular, the three closed loops including position loop, current loop and speed loop, and the hardware structure of the control system were described in detail.
铜铝管焊接的关键是对焊接参数的控制，原控制系统采用时间继电器控制焊接参数。
The key of Cu-Al pipe butt welding is to control the welding parameters. In the original control system, all welding parameters were controlled by time-relays.
控制系统采用西门子公司S7- 300系列可编程控制器组成分布式的体系结构。
Control system adopt controller can programmed which compose distributed structure belong to Siemens Corp. S7-300 series.
传统的焦炉加热控制系统采用“间歇加热控制”的方法，难以满足焦炉加热控制的要求。
The control method of Intermittent heating control adopted in traditional heating control system of coke oven cannot satisfy the heating control on coke oven.
单片机控制系统采用80c 196kc，充分利用它的特有资源，如富有特色的HSI。
The used chip as control is the single chip 80c196kc. Some source ports, such as HSI.
该文简要介绍了变频调速节能原理及在罗茨式鼓风机控制系统采用变频调速的效果与优点。
This paper briefly introduces the principle of energy saving of frequency control and the result and advantages of application frequency control in the control system of Roots blower.
该控制系统采用标准化、系统化的设计，组态方便，系统可靠，取得了较好的现场应用效果。
This control system applies standard and systemic design, configuration is convenient, and system is reliable, can achieve better application effect.
控制系统采用CAN总线技术及线控器操作控制，主要控制部分：电气、液压元件均为进口件。
The controlling system uses CAN wire technology and wire controller. The main controlling part: electrical and hydraulic parts are both imported items.
上海大学研制成功的球面机器人控制系统采用了基于VB与单片机的串行通信的两级计算机控制。
Shanghai University has developed a kind of robot, whose control system consists of a master-slave computer system based on the serial communication between VB and microcontroller.
控制系统采用紫外线传感器和光敏电阻组成对太阳光线的探测器，实现了太阳电池组件对太阳的跟踪。
In its control system, the ultraviolet radiation sensor and photoresistor are used to form a detector to track the sun with solar energy modules.
对温箱温度控制系统采用PID算法；对柴油机冷却水温度控制系统采用继电自整定PID控制算法。
Temperature-box control system USES PID algorithm and relay auto-tuning PID algorithm is introduced to diesel engine cooling water temperature control system.
新型消弧线圈控制系统采用选线装置和调谐装置两套装置共同组成，两套装置通过CAN 总线进行通信。
The new arc suppression coil control system consists of line selection device and automatic tuning device which communicate by CAN bus.
HTR -10控制棒控制系统采用全数字化的分布式控制系统，实现了全部的控制、连锁和监测要求。
The rod control system of HTR 10 is a full digital distributed control system, and carries out the entire requirements on control, interlock and monitoring.
该控制系统采用8098单片机为主体，适用于象GTR这样具有较高开关速度的大功率电源系统的控制。
The control system, based on 8098 singlechip, can be applied in the power supplies which have GTRs of high switch speed.
本自动书写仪计算机控制系统采用了GT 400SG四轴运动控制器来控制X轴、Y轴以及Z轴的运动。
The computer control system of this instrument adopts GT-400-SG four axes motion controller to control the motion of axis x, y, and Z.
本自动书写仪计算机控制系统采用了GT 400SG四轴运动控制器来控制X轴、Y轴以及Z轴的运动。
The computer control system of this instrument adopts GT-400-SG four axes motion controller to control the motion of axis x, y, and Z.
应用推荐