每个LLD都提供了到特定底层硬件的接口，但所使用的到中间层的接口却是一组标准接口。
Each LLD provides the interface to the particular underlying hardware but USES the standard set of interfaces to the mid layer.
蓝牙规范包含了一个符合标准的接口定义(主机控制器接口)，它适用于蓝牙通讯模块的硬件部分。
The Bluetooth specification includes the definition of a standardised interface (the Host Controller interface) to the hardware of a Bluetooth communications module.
接口库主要由两部分组成：特定硬件平台MPC555 的底层功能驱动函数库和针对汽车电子开发领域的特定算法接口库。
The interface library mainly contains two part of compositions, which are drive function of MPC555 hardware platform and particular algorithm interface library aiming at the autocar development realm.
对嵌入式设备的网络化的网络接口技术，做了详细分析，并以80c 196kc和rtl 8019as为例给出了网络接口的硬件和软件实现。
Also in this paper, analyzed in details the net inter-face technology of embeded device, and gave the hardware and software implementation of 80c196kc and RTL8019AS.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
设计了一种带有RS- 485接口的交流变频控制器，它硬件接口简单，通讯可靠性高。
A variable frequency inverter with a RS-485bus communication interface is designed. It has the advantages of simple hardware interface and high reliability of communication.
分析了总线接口芯片选择原则和总线冲突解决方案，给出了系统实现的硬件接口电路和软件实现详细框图。
The selection principle of bus interface chip and solution of bus conflict are introduced, together with its concrete hardware circuits and software block chart are given.
硬件部分以P89C61X2BA为控制核心，包括采用USBN9604接口芯片的USB接口电路，光栅尺输出信号处理电路，以XC95108为主的信号细分、辨向和计数电路等。
The hardware of the system is made up of P89C61X2BA as main processor, USBN9604 as USB interface, grating signal-processing circuit, XC95108 as signal subdivision, sensing, counter circuit and so on.
本文介绍了一种使用USB通用总线接口芯片CH371实现USB接口的硬件设计和软件实现方法。
This thesis introduces a hardware design and software implement method of USB port using CH371 which is a USB general interface chip.
硬件设计包括脉冲采集模块、深度模块、遥测接口模块、USB接口模块的电路设计。
The hardware design is composed of circuit designs of pulse signal acquisition module, depth module, telemetry module and USB interface module.
为了使应用的开发摆脱底层硬件的制约，使应用能通过一个统一的接口调用硬件设备，在SCA系统里定义了设备接口。
In order to make application development get rid of bottom hardware restriction, and to invoke hardware device through a general interface, device interface is defined in SCA system.
通过提供底层操作接口来管理底层硬件资源，通过文件系统API接口来实现文件和目录的管理。
Manage basic hardware resource through offering the hardware operation interface, realize file and directory management through file system API interface.
第四章对CAN总线和USB通信接口进行了探讨，设计了通信接口的软件和硬件，并进行了初步的软硬件调试。
Charper Four introduces the popular communication interface: CAN Bus and USB. It includes the software and hardware's designing of the communication interface, and the preliminary debugging.
硬件采用便携式工控机、通信接口卡和数据采集接口卡，软件基于虚拟仪器开发平台开发。
Hardware is designed based on portable industrial PC, data communication card and data acquisition card. Software is developed with virtual instrument development platform.
介绍了基于SJA1000的CAN总线接口电路的软硬件设计方法，给出了CAN总线接口电路、SJA1000初始化程序、接收及发送数据程序的框图。
This paper discusses the designing method of CAN bus juncture circuit based on SJA1000 and presents the CAN bus juncture circuit, the SJA1000 initialization programme and the flow charts.
文中对16位数据接口及32位数据接口的硬件设计分别进行了技术分析。
The hardware design of 16-bit data interface and 32-bit data interface are respectively analyzed.
该系统硬件由探测器模块、数据采集模块、ARM微处理模块、网络接口模块和人机接口模块等几大模块组成。
This system is composed of detector module, data acquisition module, ARM MPU module, network interface communication module and human machine interface module.
在硬件方面，以TMS320 LF 2407 ADSP为控制器，基于其EVM板分别扩展数字接口和模拟接口。
In hardware, we take TMS320LF2407A DSP as the controller, and the digital interface and the simulation connection based on its EVM board are expanded.
设计了PLC与PC机串行通讯口之间信号适配器硬件电路，包括输入接口电路、输出接口电路。
This research works out a design of signal adaptor circuit of serial communication port between PLC and PC, including input interface circuit and output interface circuit.
本文重点介绍了光纤CAN总线转usb接口的硬件设计，并详细给出了该接口的驱动程序。
This paper puts emphasis on the hardware of optical fiber CAN bus to USB interface. The driver of the interface is given in detail.
以新研制的USB接口水位变送器为例，结合USB协议和计算机基本原理，对设备软、硬件设计进行了深入分析，探讨了在数据采集设备中直接使用USB接口的实现方法。
For the newly developed water level transmitter with USB, on the basis of USB protocol and computer principle, the software and hardware of the instrument is analyzed in detail.
文章介绍了一种采用PCI专用接口芯片pci9052作为PCI总线与DSP (TMS320 LF 2407)的接口桥接器，实现6轴运动控制卡的硬件设计方法。
In this article, to carry the 6-axis motion controller out, a method of using PCI special interface chip PCI9052 to be a interface bridge of PCI bus and DSP (TMS320LF2407), was introduced.
硬件平台还集成了液晶、触摸屏等人机接口和嵌入式GPS模块，同时提供了USB主机、SD卡扩展接口。
The platform integrates some devices, such as the interface between human-machine (LCD and Touchpad), embedded GPS module. And it provides some extended interface such as USB Host, SD Card.
从站接口硬件设计以PHILIPS P 89c 668MCU芯片和SPC3芯片接口电路为核心，外加辅助接口电路构成。
The core of Slave interface hardware design regarded PHILIPS P89C668 MCU chip and SPC3 chip interface circuit as, and additional auxiliary interface circuit is formed.
综上所述，本课题完成了基于PCI总线接口的视频采集卡的设计，为图像的采集和传输提供了优秀的硬件基础和灵活的软件接口。
In sum, this paper implements the design of image grab card based on PCI bus and this card provides excellent hardware and flexible software interface for image acquisition and transfer.
电路通信接口采用了USB技术，并设计了USB通信的硬件接口和软件程序。
We not only adopted USB technology in the communication interfaces of the modules, but also designed the hardware interfaces and the relevant software programs.
ST应用程序接口-STAPI负责底层硬件视音频解码和显示的驱动，并向上层软件提供良好的编程接口。
ST Application programming Interface-STAPI drives the underlying hardware, video and audio decoder and display devices, and provides the upper software easy programming interface.
从硬件接口结构、软件模块接口详细分析介绍了MMI系统。
MMI system is introduced in details in the paper in the respects of the hardware interface structure and the software module interface.
从硬件接口结构、软件模块接口详细分析介绍了MMI系统。
MMI system is introduced in details in the paper in the respects of the hardware interface structure and the software module interface.
应用推荐