MIDI控制器与合成器通过电线相连接，利用异步串行接口可以在不同设备间传送命令。
MIDI controllers and synthesizers are connected using cables that allow the commands to be sent between devices using an asynchronous serial interface.
接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
论述了离子感烟探测器与火灾报警控制器之间接口电路的结构及工作原理。
Discusses the structure and working principle of the interface circuit between ion sensing smoke detector and fire alarm controller.
硬件部分重点论述了S3C 2410处理器与存储器和网络控制器芯片的接口设计问题。
In hardware design part, explains especially the interface of S3C2410 CPU chip with memory and network controller chip.
同时给出了应用双通道串行通信控制器(SCC)实现AM 79101与51单片机接口电路和应用程序设计。
Also, it provides the application of serial communication controller (SCC) which realizes the interface circuit linking AM79101 and 51mcu, and its programs.
本文介绍了串行时钟芯片DS1302的功能和工作原理，并给出ds1302在灌溉控制器中与AT 89 C51单片机的接口电路设计。
This paper introduces the functions and work principles of serial clock chip DS1302, the design of interface circuit with AT89C51 single -chip microcomputer in the spray irrigation controller.
FRAMP网卡的主要组成部分是一个功能强大的FPGA芯片和一些接口控制器与缓冲器。
The main parts of the FRAMP NIC (network interface card) are a powerful FPGA chip, some interface controllers and buffers.
其次作者采用光电编码器作为位置传感器并且利用了RS—232标准接口建立了多功能控制器与上位机的之间的位置信息传输；
The second one is to adopt optics encode as position sensor, and to use RS-232 criterion interface to make the multifunction control and PC communicate.
HD 61830是一种图形液晶显示控制器，可与8位微处理器直接接口，管理64K显示RAM。
HD61830 is a graphic LCD controller which directly interfaces to 8-bit micro-chip, managing 64k display RAM.
数字控制部分采用PIC 16f628，它担任镇流控制器与DALI之间的接口。
PIC16F628is used as an interface between the ballast controller and DALI.
接口是数字控制器与伺服驱动器间的串行实时通信总线。
SERCOS (SErial Real-time Communication System) is the serial real-time communication fieldbus between digital controller and servo-driver.
对IF M编码器进行了剖析，并介绍与之配套的LEC - 3型接口控制器。
The IFM encoder is analyzed and the associated LEC-3 Intetfacing controller is presented.
研究有限状态机与PCI总线接口控制器的设计问题。
Studies issues in the finite state machine (FSM) design in PCI bus interface controllers.
本文以内藏液晶显示控制器（T6963C）的液晶显示模块为例，介绍了其在DSP测控系统中与DSP芯片（TMS320C542）的软件和硬件接口形式。
The article takes the LCD module of T6963C controler with built-in LCD for example, presenting its software and hardware interface with DSP(TMS320C542) in DSP application.
该器件具有一个高速并行接口，可轻松与微处理器、微控制器和数字信号处理器进行接口。
The part offers a high speed parallel interface for easy connection to microprocessors, microcontrollers, and digital signal processors.
在使用时，需要通过接口控制器与控制芯片进行数据交换。
When it works, it need to communication with control IC by interface controler.
其中高速数字接口收发机包含发射器、接收器、第一复用器与控制器。
The high speed digital interface transceiver includes a transmitter, a receiver, a first multiplexer, and a controller.
所述视频及图片采集部分的视频信号经接口电路与CPU核心控制器实现交互控制。
The signals for the video and the picture collecting part are interactively controlled with the CPU kernel controller via the interface circuit.
本文介绍了一种图形LCD接口控制器的设计与实现方法。
This paper will propose a design and realization of a graphics LCD's interface controler.
总线控制器作为管理计算机与现场总线的接口装置，起到了管理计算机与智能仪表数据双向传输的网桥作用。
As a network bridge, communication controller is the interface device which realize the function of communication between supervise PC and field bus.
对基于4位嵌入式微控制器的计算器电路进行了综述，包括功能框图与工作原理、指令系统、内核硬件结构以及系统与外界接口等。
Summarization about calculator circuits based on 4 bit embeded system is given, include block diagram and work principle, the instruction system, the structure of MCU core and the I/O.
介绍了TMS320C5402芯片与RTL8019AS互联网控制器的硬件接口电路的设计，实现了一个运行在TMS320C5402上的小型嵌入式TCP/IP协议栈。
The design of hardware interface between TMS320C5402 and RTL8019AS is described, implemented a minor embedded TCP/IP protocol which was running on the DSP chip is implemented.
然后分别以内嵌CAN控制器的DSP芯片TMS320 LF 2407和CAN 232智能CAN接口卡为例说明了它们与CAN总线通信的工程实现方法。
Then taking DSP chip TMS320LF2407 embedded in CAN controller and CAN232 intelligent CAN adapter card as examples, it illustrates the engineering method of their communicating with CAN bus.
还介绍了其控制系统的架构和控制方式，给出了PLC与机器人控制器的接口方法。
The control frame and mode of this system and the interface between PLC and robot are introduced, too.
接口电路又包括与主控制器的PCI接口，与A/D转换器的接口和与协处理器的接口（HPI）。
The interface circuits include the PCI interface of the master controller, the interface of A/D converter and interface (HPI ) of the association processor.
我有一个RS232接口我的微控制器与一组预定义的命令。
I have an RS232 interface to my microcontroller with a predefined set of commands.
介绍了新型通信控制器的硬件设计，着重描述了通信接口部分，用复杂可编程逻辑器件CPLD解决了CAN 控制器芯片SJA 1000与AT 91RM 9200之间的时序逻辑问题。
The hardware structure is introduced, emphatically the communication interface circuit. The time sequence logic problem between CAN controller chip SJA1000 and AT91RM9200 is solved using the CPLD.
本文对TWI通信接口作了概述，重点论述了TWI通信接口在本微控制器中的应用，包括主机与从机的通信过程，主机读写片外EEPROM的工作过程。
This paper discusses the application of TWI in the microcontroller, including the communications between master and slave, between the microcontroller and the serial EEPROM.
为了组成高能物理实验中所使用的漂移室读出系统的测试系统，研制了一种CAMAC控制器，作为TRS-80微计算机与CAMAC机箱的接口。
In order to compose the test systems for drift chamber readout used to high energy physics exeper iments, a CAMAC controller has been designed.
数字串行接口可配置用于三线式操作，并且与微控制器和数字信号处理器兼容。
The digital serial interface can be configured for three wire operation and is compatible with microcontrollers and digital signal processors.
应用推荐