挤压应力主要来自南西方向、北东方向起阻挡作用。
The compressional stress mainly comes from SW, and the NE direction ACTS as a resistance.
营城组中的节理形成与分布主要与前两期挤压应力场有关。
It was considered that the joint formation and distribution of Yingcheng formation were mainly related with the first two compressional tectonic stress fields.
自晚第三纪以来本区主要受北东—北东东向挤压应力场控制。
The region under investigation was subjected to a strong NW-SE tension in Early Tertiary.
压力球，压力球，个性化的压力球，挤压应力球，发泡压力球。
Stress balls, stress ball, Personalized stress balls, Squeeze stress balls, Foam stress balls.
后者是由原有的南北向挤压应力场演变成南北向扭力场而形成的。
The latter were formed by theN-S striking shearing stress field evolved from the original compressive stress field.
本研究区异常高压形成的主控因素是构造抬升和水平构造挤压应力。
Tectonic uplift and lateral compression are major factors responsible for the abnormal pressure.
应力场的分析表明，劈理构造由近南北向的地壳水平挤压应力作用形成。
The stress field analysis showed that the cleavages formed under horizontal, S-N trending compressive stress.
库车前陆盆地山前构造带为强挤压应力区，形成了各种复杂的推覆构造样式。
Kuche foreland basin thrust belt is strong compressional stress zone. It comes into being various complicated overriding structural style.
由活动断裂所构成的一系列医陷谷地显示了该区新构造应力为近南北向的水平挤压应力。
A series of compressional depressed valleys formed by active faults show that the neotectonic stress field in the area is controlled by horizontal compressional stress.
由活动断裂所构成的一系列医陷谷地显示了该区新构造应力为近南北向的水平挤压应力。
Few faults had sinistral activities. A series of compressional depressed valleys formed by active faults show that the neotectonic stress field in...
由活动断裂所构成的一系列医陷谷地显示了该区新构造应力为近南北向的水平挤压应力。
Few faults had sinistral activities. A series of compressional depressed valleys formed by active faults show that the neotectonic stress field in the a...
应用该方法对塔里木盆地库车山前挤压应力区进行了实际计算，其结果与实验结果相符。
This method is applied in the calculation of the stress in the Kuqa piedmont compressive area of the Tarim basin. The calculated result coincides with the result of the acoustic experiment.
在与国外前陆盆地对比的基础上，得出四川盆地是一个受多方向挤压应力综合作用的前陆盆地。
From the correlation with foreland basins abroad it is concluded that Sichuan basin resulted from Polydirectional compression stress.
喜山早期，受印度板块与欧亚板块碰撞作用的影响，形成了北东—南西方向的水平挤压应力场。
During the Early Himalayan stage, the NE SW trending horizontal compressive TSF was formed by the effect of the collision of India plate and Eurasian plate.
认为勘探中应尽量避开褶皱强烈的地层重复地区、高挤压应力集中区和盆地粗碎屑边缘相带等。
The region with strong folding or repeated strata, high compression stress and coarse elastic marginal facies is not an ideal location for exploration.
对V形密封在整个工作寿命中，轴向挤压应力、轴向压力分布、摩擦力等特性变化进行实验研究。
The variation laws of wearing character on V - packing are studied in the whole working life. The wearing character include the friction force, axial extrusion stress and axial pressure distribution.
结果表明，频繁的蓄热和释热过程变换，使得蓄热体格孔壁面交替地受到拉应力和挤压应力的作用。
It has been found that a very frequent switching-over of the process of heat accumulation and release will subject the cellular-hole wall-surface alternately to tension and extrusion stresses.
纵向上，因上、下构造变形层抗应变能力的不同，在挤压应力作用下发生差异形变，产生纵向变异；
In vertical, differential deformation occurred under compressional stress because of different anti-strain capacities in tectonic deformation zones, which result in tectonic variation.
通过分析花键冷挤压成形极限，得到花键断面缩减率和凹模形状对花键冷挤压成形时相对挤压应力的影响。
The effect of the spline reduced rate and the die sharp to the forming limit is found by analyzing the limit of the extrusion.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
本文根据圆柱孔扩张理论分析了在单桩周围和群桩内部土中产生的打桩挤压应力，并与室内模型试验和工程实录资料作了比较。
Based on the cylindrical cavity expansion theory, the squeeze stress induced by pile driving in soils around a pile and inside cluster of piles is analyzed.
研究区构造应力场主要为挤压应力场，区内主要形成褶皱、断弯褶皱、断展褶皱、叠瓦逆冲构造、冲起构造和逆冲三角构造等构造样式。
The stress fields are compression ones, in that conditions, the structure styles are folds, Fault-bend folds, Fault-Propagation folds, Detachment folds, imbrications-thrust faults and so on.
分析了软土地基中静压桩的挤土效应机理，依据圆孔扩张理论和有效应力原理，推导出塑性区影响范围、桩对土体的挤压应力、孔隙水压力估算公式等。
The radius of plastic area, the maximum compress stress caused by driving pile , and the pore water stress can be concluded by using the cavity expansion method and the effective stress theory.
文中描述西瓜园组发育的滑动和滑塌现象，指出露头剖面中存在的挤压变形现象并非构造成因，而是由于滑动块体和滑塌块体前端的挤压应力环境造成的。
The slide and slump deposits in the Xiguayuan Formation are described. It is indicated that some compression deformations in the outcrop are formed by sedimentary process rather than tectonic origin.
这些钾离子占据更大的空间，当玻璃冷却下来的时候，钾离子便挤压在一起，从而在玻璃表面生产一层压应力层。
These larger ions take up more room and are pressed together when the glass cools, producing a layer of compressive stress on the surface of the glass.
该文利用分形几何的方法对挤压膨化大米的应力-应变曲线进行了定量分析。
In this paper, fractal geometry isu sed to quantitatively analyze the stress-strain curves of extruded rice.
利用弹塑性理论建立了孔冷挤压的载荷、位移、应力以及残余应力分布表达式；
The expressions of load, displacement, stress and residual stress distribution for hole cold_extrusion process are established by using elastic_plastic theory.
岩石磁组构反映的应力状态总体为以NE向挤压为主，与轴向NW的背斜构造发育相一致。
The stress state reflected by the rock magnetic fabric is mainly manifested by NE compression, which is consistent with the arrangement of the anticlines with axes running NW.
大量震源机制解结果表明，运城盆地存在以水平拉张为主要特点的局部小区域应力场，盆地北部水平挤压分量占优势。
A host of focal mechanism solutions show that there is a locally small regional stress field characterized by horizontal compresion component is dominant in the north of the basin.
大量震源机制解结果表明，运城盆地存在以水平拉张为主要特点的局部小区域应力场，盆地北部水平挤压分量占优势。
A host of focal mechanism solutions show that there is a locally small regional stress field characterized by horizontal compresion component is dominant in the north of the basin.
应用推荐