拉伸载荷模量约等于比例极限内的弹性模量。
The tensile modulus approximately equal to the compressive modulus of elasticity within the proportional limit.
第四，利用压电智能夹层进行了拉伸载荷识别研究。
The fourth, we have carried on identifying of tensional load making use of PZT SMART Layer.
拉伸载荷与孪晶界不垂直时，屈服应力降低，变形方式则以去孪晶为主。
When the tensile load is not perpendicular to the twin boundary, the yield stress decreases and the deformation is mainly detwinning.
本文研究了拉伸载荷下，粉煤灰填充物短玻璃纤维增强环氧树脂的影响。
In this paper, the effect of short fibreglass reinforced epoxy filled with fly ash was studied under pulling load.
并利用压电智能夹层进行了初步的拉伸载荷识别，同压电片相比，识别效果更明显。
And elementary researches have been made in identifying axial tensile load, for which reason more proper identifying purpose has been gained compared with piezoelectric wafers.
并利用压电智能夹层进行了初步的拉伸载荷识别，同压电片相比，识别效果更明显。
And elementary researches have been made in identifying axial tensile load, for which reason more proper identifying purpose has been gained compared with...
研究地磁场环境中钢试件在动拉伸载荷作用下表面弱磁信号的变化以及磁记忆效应。
Weak magnetic signal changes and metal magnetic memory effects of steel tensile samples under the excitation of geomagnetic field were studied.
利用损伤力学原理，研究了珠光体球墨铸铁在疲劳和拉伸载荷作用下的损伤演变规律。
According to principle of damage mechanics, the evolutional law of damage in pearlite ductile cast iron has been studied under fatigue and tension loading.
选择带有空间斜裂纹的2a12铝合金试件进行了拉伸载荷作用下电磁热在线止裂研究。
A study of crack prevention under tensile load is performed on an aluminum alloy 2a12 specimen with an oblique spatial crack by using electromagnetic heating online.
连续油管在工作时除受卷绕弯曲和拉伸载荷作用外，管内常受到内压作用，承受三轴应力。
When working, coiled tubing is loaded by bending, drawing and inside pressure, so that it would bear three dimension stress.
推导了平面应力条件下单边圆形底部深缺口板条受纯弯曲和拉伸载荷作用的极限载荷公式。
The limit load formulae of single-edge deeply notched plates with round ends subjected to pure bend moment and tensile load under plane stress condition have been derived.
测定了UHM-WPE/HDPE复合材料在拉伸载荷作用下的声发射（AE）振幅信号。
UHMWPE/HDPE composite materials were experimented to determine the event amplitude content of AE signals under tensile loads.
利用分子动力学方法研究了双晶铜在单向拉伸载荷作用下弹性性能的应变率效应和尺寸效应。
Molecular dynamic simulations were used to investigate the effect of strain rate and size on the mechanical properties of nano-bi-crystal Cu under uniaxial tension.
实验结果表明：纵向拉伸载荷对尼龙帘线-橡胶复合材料的横向拉伸力学性能有很大的影响。
Experiment results indicate that the effects of longitudinal constant tensile loads on transverse tensile behaviors are obvious.
本文主要探讨了机织物在各个方向承受单向拉伸载荷、双向拉伸载荷及弯曲载荷时的力学性能。
This paper has mainly discussed the mechanical properties of woven fabrics in different directions under uniaxial stretching biaxial stretching and bending loads.
目的探讨应变率和骨密度与下颌骨拉伸力学性能的关系，建立下颌骨在拉伸载荷下的本构方程。
Objective To study the biomechanical properties of human mandible under tension load and deduce the constitutive equation.
该文研究了由两个不可压热超弹性球体组合而成的物体在突加表面均布拉伸载荷作用下空穴的动态生成问题。
Dynamical cavitation in a spheroid composed of two incompressible thermal-hyperelastic Gent-Thomas materials under boundary dead-loading is examined.
结果表明，拉伸载荷作用下，航空用超高强度钢中裂纹萌生的方式与夹杂物尺寸及夹杂物周围孔洞的大小有关。
The experimental results show that the types of crack initiation at inclusion in ultrahigh strength steel under tensile load depend on the sizes of inclusion and the hole around inclusion.
通过搭建数字图像相关方法光学非接触测量系统，试验表征含单边裂纹芳纶纤维复合材料试验件在拉伸载荷作用下的全场位移。
The optical measurement system of digital image correlation method was established, and the full field displacement of the single-edge crack specimen was obtained experimentally.
链轮/皮带M1233的接口 -在很大程度上得益于其两排牙齿，它允许更高的拉伸载荷的传输和扩展链轮生活 -被视为优越。
The M1233's sprocket/belt interface – due in large part to its double row of teeth, which permits the transmission of higher tensile loads and extends sprocket life – was deemed superior.
应用提出的全程分析方法和三维逐渐累积损伤理论，对层合板的冲击过程以及冲击后含损伤层合板在拉伸载荷下的破坏过程进行详细分析。
The impact damage process and residual tensile strength after impact of laminated composites are analyzed by the whole-process analysis method and 3D progressive damage theory.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
对螺栓拉伸强度计算的载荷系数法作了进一步改进。
The load coefficient method of bolt on tensile strength calculation was improved.
结果得出了对照组和实验组动物肘关节尺神经拉伸最大载荷，最大应力，最大应变，弹性模量等数据。
Results We got out the data of stretch ultimate load, maximum stress, maximum strain, elastic modulus on elbow joint ulnar nerve between control group and experimental group.
在恒定载荷下，随持续拉伸时间延长或温度升高，肌腱的塑性变形明显增加。
Under constant load, the plastic deformation increased when the tendon under went a prolonged stretch or under warmer temperature.
用扫描电镜（SEM）分析了X60管线钢在未变形和10%的预拉伸变形后循环载荷下的裂纹断口形貌。
The crack fractographs of X60 pipeline steel after 10% per-tension deformation under cyclic loading are investigated by the SEM.
人和猕猴膝关节发生扭转和拉伸损伤时的平均载荷传递比分别为8．6和1．3。
The mean load transfer ratios between human and rhesus monkey knee joints are 8.6 and 1.3 for torsional and tensional injuries respectively.
充氢条件下应力弛豫和恒载荷拉伸试验结果表明，氢有引起钢的软化和硬化的双重作用。
The experimental results of stress relaxation and constant load tests in hydrogen charging condition prove that hydrogen has dual action of softening and hardening steel.
采用恒载荷和慢应变速率动态拉伸实验方法，测定了X80管道钢在不同充氢条件下的氢致开裂门槛应力和断裂应力。
The threshold stress and fracture stress of hydrogen-induced cracking of X80 pipeline steel are studied by constant load test and slow stain rate test.
采用恒载荷和慢应变速率动态拉伸实验方法，测定了X80管道钢在不同充氢条件下的氢致开裂门槛应力和断裂应力。
The threshold stress and fracture stress of hydrogen-induced cracking of X80 pipeline steel are studied by constant load test and slow stain rate test.
应用推荐