采用液体喷丸方法提高零件表面强度及抗应力腐蚀能力。
Wet spraying pellet was used to improve the surface' s strength and stress corrosion resistance of the workpiece.
胀形后残余应力的这种有利分布，提高了球罐的抗应力腐蚀性能。
This favourable distributions of residual stresses after hydrobulging can improve the anti stress corrosion cracking ability of the spherical vessels.
碳钢—具有很好的机械性能，很好的抗应力腐蚀和硫化物腐蚀的性能。
Carbon Steel - Very good mechanical properties; good resistance to stress corrosion and sulfides.
固溶处理是改善和提高奥氏体不锈钢波纹管抗应力腐蚀能力的有效措施。
And solution treatment is the valid method to improve the anticorrosion property of the austenite stainless steel bellows.
迄今，该系高强铝合金的强度已大幅提高，但抗应力腐蚀开裂性能有待改进。
So far, high-strength aluminum alloy has fairly high strength, but its stress corrosion cracking resistance needs to be further enhanced.
AF 1410超高强度钢是一种抗应力腐蚀和焊接性能较好的新型航空材料。
Superhigh strength steel AF1410 is a type of new aviation steel, which is good for resisting stress corrosion and is not difficult to weld.
通过力学性能以及抗应力腐蚀的测定，对7005铝合金的热处理工艺进行了研究。
The heat treatment process of 7005 alloy is studied in terms of mechanical properties and resistance to stress corrosion test.
它们的存在会对结构的几何尺寸、结构强度、抗应力腐蚀(SCC)能力产生影响。
Their existence will have influence on the structure of the geometric size, structural strength, resistance to stress corrosion (SCC) capacity impact.
通常用作额定压力阀门的阀杆材料的硅青铜比普通黄铜具有更好的抗应力腐蚀裂纹的性能。
Commonly used as stem material in pressure-rated valves, silicon bronze has greater resistance to stress corrosion cracking than common brasses.
研究了锻坯高温处理对7175铝合金锻件抗应力腐蚀性能的影响，并对其影响机理进行了分析。
The effects of a kind of special high temperature treatment on stress corrosion resistance of 7175 aluminum alloy forgings were studied, and the mechanism of the effects was explained.
研究表明该钢具有较好的抗应力腐蚀性能，其应力腐蚀断裂形貌为穿晶、解理断裂，并有二次裂纹。
The stress corrosion cracking sensitivity of the steel was low, and the fractography of its stress corrosion cracking showed transgranular and quasi-cleavage fracture with secondary cracks.
试验结果表明，分级时效工艺在提高合金机械性能的同时，还能使合金抗应力腐蚀性能得到明显改善。
Experimental results show that stepped aging process not only enhances mechanical properties but also improves resistance against stress corrosion of the alloy.
并与传统的2024（CZ）合金进行了比较。结果表明，2091合金具有较好的抗应力腐蚀能力。
The results showed that 2091 alloy had better resistance to stress corrosion cracking than that of traditional 2024 (CZ) alloy.
用内孔焊结构代替传统的端面焊结构是提高换热器管子与管板焊接接头抗应力腐蚀和缝隙腐蚀稳定性的根本途径。
Substituting inner-hole welding construction for traditional end surface welding construction is a fundamental method for raising the stabilities of anti-stress corrosion and anti-slit corrosion.
T73和RRA时效处理改善了合金晶界特性，有助于阻止氢脆、减缓晶界阳极溶解速度，提高合金的抗应力腐蚀能力。
T73 and RRA treatment improve the grain boundary character, which is help to inhibit hydrogen embrittlement and decrease anodic dissolution rate, then to improve the SCCR of the alloy.
试验结果表明，该厚板具有良好的抗应力腐蚀性能，其技术指标达到美国AMS4202A《74-T7351合金厚板》标准的要求。
The test results show that the 7475-T7351 plates have good stress corrosion resistance. Their properties meet the AMS4202A《7475-T7351 alloy plate》standard.
介绍了为制造大型原油储罐而专门开发的WH 610d2钢板优良的力学性能、焊接性能和抗硫化氢应力腐蚀性能，该钢种特别适合于大线能量焊接。
The developed WH610D2 plate for large crude oil storage tanks was introduced. Its good mechanical performance, weldability and resistance to H_2S stress corrosion were mainly introduced.
依据NACE标准研究了X80级管线钢的抗硫化物应力腐蚀开裂(SSCC)和氢致开裂(HIC)行为。
Based on the NACE standard, the behavior of restriction on hydrogen induced cracking (HIC) and sulfide stress corrosion cracking (SSCC) of X80 grade pipeline steel was investigated.
玻璃纤维网格布在建筑方面的应用日益增多，网布的表面涂上高分子涂层可以提高网布抗碱腐蚀和承受复杂应力的能力。
More and more fiberglass mesh were applied in architecture, it could improve the ability of alkali resistance and strength of fiberglass mesh by coating the mesh with emulsion polymer.
环氧玻璃鳞片涂料、胶泥具有优良的抗渗透能力及防腐蚀性能，残余应力小，易于保证施工质量。
Epoxy glass flake coating and daub offers excellent anti-permeability and corrosion resistance. They are small in residue stress and easy in construction.
对“PU-1”钢和焊缝合金断裂行为的研究结果表明，“PU-1”钻材钢抗H2S应力腐蚀性能和焊接性能较好，应用于结构钢构件具有显著的经济和社会效益。
The results show: drill steel type "PU-1" has good H2S stress corrosion resistant and weldability, which can be used for structures with high economical profit and society significance.
作了两种熔合线部位的热模拟试件，证明其抗h_2s应力腐蚀性能最差。
Two kinds of heat simulated specimens of fusion line are made that their resistance to H2S stress corrosion is proved to be the minimum.
这种合金能够缓解金属超应力引起的腐蚀所造成的断裂，其抗硫酸腐蚀的性能也有很大的改善。合金20在化工生产过程中具有广泛的应用。
This alloy retards stress corrosion cracking and has improved resistance to sulfuric acid. Alloy 20 finds wide use in all phases of chemical processing.
该课题对于忠武输气管线拟采用的X60抗硫化物应力腐蚀管线钢进行了环焊缝焊接工艺研究。
In this paper, focused on researching on welding process of anti-SSCC X60 pipeline steel for ZHONG-WU pipeline.
该课题对于忠武输气管线拟采用的X60抗硫化物应力腐蚀管线钢进行了环焊缝焊接工艺研究。
In this paper, focused on researching on welding process of anti-SSCC X60 pipeline steel for ZHONG-WU pipeline.
应用推荐