通过小型批量试验，对酵母菌处理皂素生产废水的技术条件进行了研究。
With small batch experiments, the technical conditions for treatment of saponin manufacturing wastewater by yeast were studied.
试验表明，采用合适的冶炼工艺，大型转炉加炉外精炼能够批量生产超低硫低磷钻杆用钢，使钻杆获得高横向冲击韧性。
Test results show that such steel can be mass produced with technology of a large converter plus the secondary refining, which can insure drill pipes for the transverse impact toughness.
对于常见目的(比如调整批量混凝土的成分)，本试验方法可提供充分的精确度。
This test method is sufficiently accurate for usual purposes, such as adjusting batch quantities of ingredients for concrete.
根据手动模具成形试验的结果，设计了适合批量生产，与旋转成形压机配套的自动成形模具。
Following the compacting test results, we designed the auto model for the rotary press to meet the requirement of mass production.
最后，采用本文的工艺手段和精度控制措施，进行了一系列齿轮精锻试验，并进行了小批量的生摘要产。
At last, with the improved forming process and accuracy control operation in this thesis, series of experiments of precision gear forging have been implemented.
该新药在批量生产之前经过了多次医学试验。
The new medicine had gone through a number of medical trials before it was mass-produced.
批量生产性试验效果良好。
最后还论述了如何结合快速模具及精密铸造技术小批量制造引信零件应用于引信研制阶段的实验室试验及实弹试验中。
At last we discussed how to combine the rapid tooling and precision foundry to produce batch of samples, we can apply these samples in the fuze system and ball cartridge experimentation.
经过反复的工艺试验及一年多批量生产验证，成功地将熔融石英应用于精铸用低温蜡—硅溶胶型壳生产中。
By repeating technological tests and batch production tests for over a year, the fused silica was successfully used in the production of silica sol shell for low temperature wax precision casting.
理论和实际装车试验都证明了这一项目的可行性，一些国家已开始批量生产装车运行。
Theory and Practice of setting test in automobile demonstrate that this project is practicable. Some countries have began on batch production and put the products into use.
通过冲连皮工艺试验及批量生产，证明采用冲连皮工艺能够应用于活塞销加工过程；
Through stamping technology test and batch yield, it is proved that the process can be applicable to piston pin manufacture;
参与新产品项目的实施，保障新产品试验及大批量生产顺利进行。
Participate in the new product launch, ensure pilot run and mass production of the new product smoothly.
对硬铝、纯铝、防锈铝合金镀银进行了试验并获得成功，投入了批量生产。
Successful tests on the silver plating on hard aluminium, pure aluminium and rust-proof aluminium alloy, are made and the mass production is finally carried out.
试验证明，新的钻头刃型在大批量汽车生产中使用效果很好。
Test has proved that the excellent result with new cutting edge shape of drills has been obtained during large mass-production of automobile.
测定了选矿试验中大批量样品二氧化硅含量。
Silicon dioxide content of the multitudinous samples in the ore dressing test was assayed.
通过试验分析，探索了煤直接液化残渣采用热态、小批量连续进料炼焦工艺的可行性。
The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
这个型号经过试验后才进行大批量生产。
This model had been tested out before it was put into production.
首先，用批量平衡法开展了镉在砂质壤土、壤质砂土和粉壤土中的吸附特性的试验研究，获得吸附常数；
First, to characterize the adsorption property of cadmium, cadmium adsorption isotherms in soils were determined by the batch experiment, and the adsorption parameters were obtained;
经小批量生产、各种试验、试车，证明本项目研究的钎焊工艺是成功的。
The results of batch production has been indicated that the adopting technology had been succeeded extremely.
本文就此类板件的生产进行深入研究、试验、批量生产验证，找出一种高精度，高效率的加工方法。
This article involves an in-depth study and experiment of this kind of PCB, achieves high precision, and high efficiency goals through experiment and mass production quality verification.
企业具备大规模批量生产加工能力，主要有机械加工、冷挤冲压、塑料成型、弹簧加工、表面处理、总成装配、检测试验等工艺方式。
JABF owns production and manufacturing capacity on large-scale, including processes of metal machining, cold stamping, plastic forming, spring coiling, surface treatment and final assembly etc.
经一定批量油剂纺丝应用试验，表明ASY-2的各项性能与XF-2B相接近，具有替代进口油剂，实现油剂国产化的推广应用前景。
The result shows that properties of ASY-2 finish can basically come up to that of XF-2B. It can replace the imported finish and will become a promising finish in our country.
针对临钢高炉冶炼条件，对高炉出铁口用有水炮泥进行研制，通过试制、试验和批量使用，所研制的炮泥满足了高炉的使用要求。
Research on Bot Stuff used in iron notch was conduced on the ironmaking condition in NewLingang Iron and Steel Co. Ltd. As a reult, the Bot Stuff can meet the requirements of being used in BF.
通过批量和堆肥反应器的试验研究，初步得出了堆肥过程的优化控制参数：通过周期性的补水，使堆料的含水率保持在50-60%之间；
Studies of batch test and composting reactor presented optimized conditions as follows:keeping 50%-60% of moisture content by periodic replenishment of water.
通过冲连皮工艺试验及批量生产，证明采用冲连皮工艺能够应用于活塞销加工过程；
The effective adopting stamping process on piston pin product quality and belemnoid demension is explained;
为了研究固体废物批量热解特性，在试验台上进行了批量规模的高温热解试验，得到了各样本的热解气组分和产气率。
The change of final pyrolysis temperature, characteristic of waste, rate of gas yield and the key element of gas calorific value were studied in detail.
为了研究固体废物批量热解特性，在试验台上进行了批量规模的高温热解试验，得到了各样本的热解气组分和产气率。
The change of final pyrolysis temperature, characteristic of waste, rate of gas yield and the key element of gas calorific value were studied in detail.
应用推荐