• 速度型过阻尼地震检波器相对阻尼系数的测量方法进行了研究。

    It was devoted to the relative damping measurement for overdamped geophone with a moving coil of constant velocity.

    youdao

  • 绞车工作特性进行分析,采用大林算法设计了一速度数字控制器给出了控制模型数学公式

    Analyzing the characteristic of the hoist, a kind of digital controller of constant speed is designed using Dahlin arithmetic, the model and formulas are presented.

    youdao

  • ACS 5000变速驱动系统使得波音公司可以根据每个测试规程参数,自由设定可调速度模式或者模式。

    The ACS 5000 variable speed drive system enables Boeing to run the fan in adjustable speed mode or at constant speed, depending on the protocols and parameters of each test.

    youdao

  • 实现翻转过程中薄膜线速度张力控制,采用转速张力闭环控制,线速度作为主控制变量,进行综合控制。

    In order to carry out the constant line speed and the constant tension for the rolling of plastic films during reversal, loop control of the rotating speeds and the tension is adopted.

    youdao

  • 同时,讨论了钢筋锈蚀速度参数载参数对服役可靠性的影响。

    The effects of parameters such as variability in dead and live load and corrosion rate are studied.

    youdao

  • 浆纱机卷绕装置能否实现张力卷绕直接影响着浆纱速度质量

    The winding device of the sizing machine determines the sizing speed and quality.

    youdao

  • 仿真实验表明采用GPC算法能使挤压速度精确跟踪设定曲线,有效抑制对象参数时变、突加值干扰及随机干扰影响

    Simulation results showed that the GPC algorithm enabled extrusion speed to follow the given tracks accurately, and could effectively restrain the influence of variety of plant parameters.

    youdao

  • 通过试验确定了针对城市污水直接膜过滤应选择的合适错速度、料液温度以及采用低压操作的模式。

    This article presents an experimental determination for optimal operational parameters, such as cross velocity, trans-membrane pressure, temperature and fixed flux operation, etc.

    youdao

  • 经计算机仿真理论分析表明算法传统模算法相比收敛速度加快稳态剩余误差减小

    Computer simulations and theory analyses show that the proposed algorithm can speed up convergence rate and decrease state residual error compared with conventional CMA blind equalization algorithm.

    youdao

  • 速度闭环控制系统应用了模糊pid控制策略,实现摊铺机控制

    The paver can be controlled with constant speed. The close type speed control system USES fuzzy control tactics PID.

    youdao

  • 理论分析计算机仿真实验表明算法传统模算法相比具有更快收敛速度和更小的稳态剩余误差

    Theoritical analyse and computer simulation both shows the new one has faster convergent speed and less steady error than traditional constant-modulus algorithms.

    youdao

  • 基于定子磁场定向矢量控制线运行控制方案基础提出了一个速度闭环闭环的矢量控制方案

    Then a vector control method with speed closed-loop and magnetic linkage closed loops put forward, which is based on the constant velocity by means of stator flux-oriented vector control.

    youdao

  • 本文介绍一种新颖的速度张力自动平滑转换张力控制系统

    This paper introduces a new system with speed and tension which can realize the auto-smooth conversion for constant tension control.

    youdao

  • 结果表明荔枝微波干燥主要处于阶段,干燥速度取决于不同间歇比;

    The experimental results showed that the constant speed drying was the main stage of litchi microwave drying and the drying speed depended on different intermittent rates.

    youdao

  • 就是众所周知速度速度方程这个方程线性直线的斜率就是加速度

    Is the well-known equation for velocity under constant acceleration. This equation is linear; the slope of the line is the acceleration.

    youdao

  • 阳极电流不但使载荷的不锈钢蠕变速度增加,而且使屈服强度下降

    The creep rate was increased while the yield strength was reduced by anodic dissolution.

    youdao

  • 运动速度采用速,也可以通过电机控制变速运动方式。

    The speed can be constant or be changed by the controlling of step motor.

    youdao

  • 理论分析计算机仿真实验均表明算法传统算法相比具有更快收敛速度和更小的稳态剩余误差。

    The theoretical analysis and the simulation results proved to show that the new algorithm has improved performance of the convergence speed and residual error than traditional CM algorithm.

    youdao

  • 提出张力状态方程设计张力最控制器进一步将张力最优控制器预控速度张力控制系统结合,设计热连轧张力复合控制系统的方案

    Now a new plan is put forward that an optimal tension controller is designed by using tension state equation, and still further the tension comp.

    youdao

  • 对其速度闭环控制系统应用模糊pid控制策略实现了摊铺机控制。

    The fuzzy PID control strategy is applied to the closed loop speed control system to realize consistent speed control.

    youdao

  • 导数就是这个速度

    The second time derivative is the constant acceleration.

    youdao

  • 为了消除以上弊端我们设想找出凸轮磨削移动速度规律,使凸轮作线速磨削。

    In order to avoid those disadvantages, we assume that the CAM part rotates in different rates to make the speeds of every grinding point equal.

    youdao

  • 这种算法矩阵算法表现出更快的收敛速度更好地抑制噪声的性能

    This new algorithm has better converge and interference suppressors performance than what Matrix CMA algorithm has.

    youdao

  • 研究阻尼动圈地震检波器参数测量方法。

    It focuses on parameter measurement for constant acceleration overdamped coil type geophones.

    youdao

  • 该试验箱采用平衡温湿度控制方式结合PID控制温湿度解处理,实现了响应速度快、温湿度调节精度高的湿控制。

    With balance control mode of temperature and humidity, PID control, temperature and humidity decoupling applied, the high-response-speed and high-precision control can be fulfilled.

    youdao

  • 详细介绍应用磁质点速度有机玻璃冲击研究的全过程。

    In this paper the application of a permanent-magnet particle velometer in impact test for PMMA is presented in detail.

    youdao

  • MMH经呼吸道吸收,与速静脉输注一样,为表观零级速度过程

    The absorption of MMH through lungs could be characterized as an apparent zero-order process similar to that of the infused MMH.

    youdao

  • 速度卷装交流电机直接拖动经轴,并plc控制变频器实现级调速,线卷绕

    High speed, big package, ac motor drives beam directly, controlled by PLC. Stepless speed regulated by inverter, winding at a constant linear speed.

    youdao

  • 介绍了摊铺机行驶控制系统的基本要求,单边行驶回路为例探讨了工作原理; 根据摊铺机对行驶速度要求,分析速控制技术,探讨了行驶系统控制方式。

    The principle of phase lock loop and its application in the motor power-measuring system are introduced, furthermore the design and analysis of the circuit for constant speed control are provided.

    youdao

  • 介绍了摊铺机行驶控制系统的基本要求,单边行驶回路为例探讨了工作原理; 根据摊铺机对行驶速度要求,分析速控制技术,探讨了行驶系统控制方式。

    The principle of phase lock loop and its application in the motor power-measuring system are introduced, furthermore the design and analysis of the circuit for constant speed control are provided.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定