警告！你需要升级你的HD音频总线驱动。
警告！你需要升级你的HD音频总线驱动。
Please go to the below website to get the latest HD Audio bus driver.
USB总线驱动程序负责控制实际的硬件，实现与底层的通信。
The USB Bus device driver takes charge of control and communicates with hardware.
PCI总线驱动程序的实质是通过相应板卡配置空间的访问来配置系统资源。
The essence of the driver is to configure the system resources through access to the configuration space of corresponding PCI card.
其内容包括串口驱动、LCD驱动、触摸屏驱动及控制键盘的I2C总线驱动。
These drivers include Serial port, LCD, Touchscreen, and I2C bus driver which is used to control keyboard.
总线驱动已经自行处理了这个部分，因为总线有专门的结构来代替设备和驱动。
With generic device and device driver structures, most of the binding can take place using common code.
因为存在着总线定制结构为代表的设备和驱动，所以总线驱动有自己的处理方法。
Bus drivers have typically handled this because there have been bus-specific structures to represent the devices and the drivers.
PDO代表的物理设备对象。总线驱动使用这个对象来描绘介于设备和总线之间的连结。
PDO stands for physical device object. The bus driver USES this object to represent the connection between the device and the bus.
当一个总线驱动被初始化的时候，就会调用总线注册函数。它会初始化总线对象的其他域。
When a bus driver is initialized, it calls bus_register. This initializes the rest of the fields in the bus.
对于即插即用总线的一个总线驱动有能力在启动的时候通过扫描所有可能的端口来列举它的总线。
A bus driver for a Plug and Play bus has the ability to enumerate its bus by scanning all possible slots at start-up time.
在设计上除模拟控制及总线驱动等器件外，尽量采用FPGA来实现控制逻辑以提供应用平台的可扩展性。
Except for the analogue controlling and bus driving devices, we use FPGA to implement controlling logic in order to provide expansibility of application platform.
检测的水表数据通过单片机串行输入到CAN总线驱动器并经过总线驱动器、中继器实现信息的网络传输。
The measured data of water meter is input by micro-computer to CAN Bus-driver serially. And, through Bus-driver and carrier, network transmission of information is realized.
最后基于LPC 2194微控制器和TJA1050高速CAN总线驱动器开发了各通信节点。实际应用表明，该系统稳定可靠。
Communication nodes are developed based on microcontroller LPC2194 and high speed CAN bus driver TJA1050. The application shows that the network is reliable and stable.
由下往上将整个驱动软件系统分为总线驱动层、设备功能驱动层、通信层和用户界面等层次，每一层都以接口的形式为上层提供服务。
From bottom to top, the system is plotted out bus driver layer, device function driver layer, communication layer and user-interface. Each layer provides service to the layer above by interface style.
介绍了串口编程技术，RS485总线驱动模式和RS485串口驱动程序。 然后在此基础上设计和实现了SDM300远程控制模块和异步信道的通信模块。
Findally, we implement SDM300 remote control module and Async communication module on the basis of introducing technology of serial programming , RS485 bus driving mode and RS485 serial driver.
USB功能驱动程序由设备开发者编写，位于USB总线驱动程序的上层，通过向USB总线驱动程序发送USB请求包，来实现对USB设备信息的发送或接收。
USB Function device driver is designed by client, it lies the up layer of USB Bus device driver, it sends and receives information from USB device by send URB to USB Bus device driver.
通过事件驱动消息总线的每一个业务应用程序都是其它应用程序的同位体。
Each business application is a peer of the others through the event-driven message bus.
如上所述，服务集成总线拥有内置重试机制和SCA消息驱动Bean (MDB)。
As describe above, the Service Integration Bus has a built-in retry mechanism with the SCA message driven bean (MDB).
使用高速适配器连接磁盘驱动器，这一点是非常重要的，但是您必须确保该总线本身不会成为一个瓶颈。
Using high-speed adapters to connect the disk drives are extremely important, but you must make certain that the bus itself does not become a bottleneck.
BIOS所做的工作大部分会被忽略掉，操作系统一旦加载scsi驱动程序之后，就会自行扫描scsi总线。
The work the BIOS did is mostly ignored; the operating system, once it loads a SCSI driver, will do its own scan of the SCSI bus.
请求从集群磁盘驱动传递到微软存储驱动栈，并最终传递到与磁盘通讯的那个总线适配器。
The request is passed from the cluster disk driver to the Microsoft storage driver stack and finally to the driver specific to the HBA that communicates to the disks.
如果您准备用SCSI设备创建一个RAID - 0卷，注意不要让所有驱动器的总吞吐量超过SCSI(和PCI)总线的最大吞吐量。
If you're creating a RAID-0 volume out of SCSI devices, be aware that the combined throughput of all the drives can potentially exceed the maximum throughput of the SCSI (and potentially PCI) bus.
这篇文章分析了无线设备的一些示例，并且研究了设备驱动程序的Linux实现、总线技术以及各种协议。
This article examines examples of such wireless devices and explores the respective Linux implementations of the device drivers, bus technologies, and protocols.
这些是我们发送消息到总线和从那儿到消息驱动bean需要的所有构件。
These are all the artifacts that we need to send a message to the bus and, from there, to the message-driven bean.
接下来总线可以将消息转发至JMS消费者，例如消息驱动bean。
The bus can then forward this message to a JMS consumer, such as a message-driven bean.
这个命令是通过整个总线重置，或者storport驱动对总线上的特定设备进行重置来实现。
This command can either be a bus reset (for the entire bus) or, using the storport drivers a targeted reset for a particular device on the bus.
企业服务总线(EnterpriseService Bus,ESB)将事件驱动的方法和面向服务的方法结合使用，以简化业务单元的集成，从而在异类平台和环境间建立联系。
An Enterprise service bus (ESB) combines event-driven and service oriented approaches to simplify integration of business units, bridging heterogeneous platforms and environments.
由于您的Web服务还接受使用JMS的请求，因此需要创建一个总线、两个用于传入和应答的队列目的地和一个用于消息驱动Bean (Message Driven Bean,mdb)的激活规范。
Because your Web service also accepts requests using the JMS, you need to create a bus, two queue destinations for incoming and replies, and an activation spec for the message driven bean (MDB).
在 Ångström第一次引导时，它会检查系统上的总线，初始化键盘、显示器、鼠标、以太网适配器和所有其他外设，然后寻找要使用的驱动程序。
The first time Ångström boots, it inspects the buses on the system and initializes the keyboard, display, mouse, Ethernet adapter, and any other peripherals, then finds the correct drivers to use.
在 Ångström第一次引导时，它会检查系统上的总线，初始化键盘、显示器、鼠标、以太网适配器和所有其他外设，然后寻找要使用的驱动程序。
The first time Ångström boots, it inspects the buses on the system and initializes the keyboard, display, mouse, Ethernet adapter, and any other peripherals, then finds the correct drivers to use.
应用推荐