对CAN总线节点通讯卡的硬件组成,软件流程做了较详细的说明。
The hardware composition and software flowchart of the CANbus node communication card are described in detail.
同时主要对CAN总线节点的通信程序、家电通用控制器和数据采集模块进行了详细设计,并最终在开发环境下演示运行。
And it designs the CAN field bus node communication, the universal controller and the module of data gathering in details, and finally runs the system under the development environment.
介绍了一种应用pic 18 F系列单片机片上CAN总线模块实现CAN总线节点的新方法,给出了系统的组成和硬件配置,讨论了系统软件设计和测试原理。
A new method of node implemented with PIC18F MCU on CAN bus is introduced in this paper. The structure and hardware configure are described, the software design and test principle are discussed.
一个总线可以跨多个节点和机器,拥有一个或多个服务器或集群作为其总线成员。
A bus can span multiple nodes and machines, and has one or more servers or clusters as its bus members.
当挑战节点检测到通讯丢失后,立刻申请SCSI总线范围的重置来中断所有已有的占用。
When the challenger detects the loss of all communications, it immediately requests a bus-wide SCSI reset to break any existing reservations.
注意总线成员可能不同,因为您的服务器运行在您自己的节点上。
Note that the bus member name is likely to be different, as your server will running on your own node.
NUMA通过限制任何一条内存总线上的CPU数量并依靠高速互连来连接各个节点,从而缓解了这些瓶颈状况。
NUMA alleviates these bottlenecks by limiting the number of CPUs on any one memory bus and connecting the various nodes by means of a high speed interconnection.
本文对于利用FPGA芯片进行系统设计的研究人员具有一定的参考价值,也可以作为LONWORKS现场总线智能节点开发的参考资料。
The paper maybe value to those who ready to use FPGA chips in their designs or be reference for development of neuron node based on LONWORKS field-bus technology.
最后基于LPC 2194微控制器和TJA1050高速CAN总线驱动器开发了各通信节点。实际应用表明,该系统稳定可靠。
Communication nodes are developed based on microcontroller LPC2194 and high speed CAN bus driver TJA1050. The application shows that the network is reliable and stable.
然后将MCU芯片at89c51和SJA1000总线控制器结合,为实验平台设计了实时可靠的智能控制CAN节点。
Thirdly, combining MCU clip AT89C51 with bus controller SJA1000, an intelligent control CAN node for the experimental platform is designed.
在其硬件设计中,着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
给出了一种OBS边缘节点总线控制的硬件设计方案。
A hardware design of bus control module in OBS edge node is reported.
多播技术是控制CAN总线系统中节点同步工作的有效方法。
Multicast is an effective way to control nodes working synchronously in CAN bus system.
设计并实现一种新颖的CAN总线双冗余节点电路,增强了冗余切换的灵活性。
A new circuit for CAN bus dual-redundancy node is designed and implemented, which makes the redundancy switch more flexible.
CAN总线上的智能节点是网络上报文的接收和发送站,一般由单片机和可编程的CAN通信控制器组成。
The smart node on CAN field-bus is the transmit or receive station of messages. It is mainly combined with micro-controller and programmable CAN controller.
数据节点通过各自CAN控制器与总线相联,实现网络数据交换。
Data nodes are connected to the bus through their own CAN controllers to realize network data-changing.
这是一个CAN总线通信的节点程序,是我自己编写的,希望指正。
This is a CAN bus communication nodes procedures, the preparation of my own, and I hope correct me.
介绍了基于CAN总线的通信节点设计方法。
This paper introduces the way of designing communication node based on CAN bus.
该文介绍新型电动叉车CAN总线控制系统中人机交互节点。
The paper introduces a man machine interactive node in the CAN bus control system for the electric fork lift.
其设计包括不同数据节点的CAN控制器,及单片机控制的CAN接口模块和基于DSPTMS320 LF 2407a的CAN总线接口等。
The design includes designs of different can controllers for different data nodes, the can module controlled by single chip computer and can bus interface based on DSP TMS320LF2407A, etc.
为保证信息的可靠、快速的传递,采用基于CAN总线的通讯网络。使故障录波监测装置的故障信息及时上报到后台pc网络节点上。
The system use communication net based on the can bus to ensure that the fault message of recorder equipment can be transferred to PC net node fastly.
介绍一种通用CAN节点的电路结构、相关应用程序及在工业中频感应加热设备控制现场总线中的应用。
An introduction to the circuit structure and program of universal CAN node as well as the application in inductive heating.
为了避免死锁问题,我们采用了基于黑总线的确定路由,并对路由节点进行了设计。
To avoid this problem, we adopt a deterministic routing method based on Black-Bus technology and then we design the router node.
文章介绍了1553B总线的特点,基于1553总线设计的嵌入式网络节点类型和网络结构。
This paper introduces the characteristics of 1553b bus, and the nodes' functions and network structure based on 1553b bus.
本文中论述了CAN总线的基本原理与技术规范;设计了以微控制器AT89S52为核心的CAN总线智能节点;
This dissertation elaborated the basic principle and the technology standard of CAN bus, and designed a CAN node with AT89S52 micro-controller.
该控制器不仅可实现信号的采集、处理、显示,还可通过CAN总线实现不同节点间信号的传输。
The controller can realize not only the collection, processing and display of the signal, but also the transmission of signals between different nodes through can bus.
节点通过智能网络适配器连接到CAN总线上,从而实现了多主结构网络数据的及时、准确、可靠传递。
Nodes are connected to CAN bus through the adapter of intelligent network, resulting in timely, exact and reliable transfer of multifold main architecture network data.
在了解CAN总线功能与特性的基础上,重点阐述了CAN总线智能节点在煤矿运输信、集、闭系统中的应用。
This paper presents the function and characteristics of CAN bus, and gives more description of CAN intelligent nodes application in coal transportation signal, integrated and blocked system.
CAN总线连接各节点,是控制信息和状态信息传递的通道。
CAN bus is the channel of transmission of control and state messages.
开发了以单片机ds80c 390为核心的双CAN总线分层分布式监控系统,设计了双CAN总线的智能CAN节点。
A hierarchical distributed monitor and control system with dual CAN bus is presented, which bass on MCU DS80C390. The intelligent CAN node of dual CAN bus is developed.
应用推荐