微观形貌观察表明产物呈规整球形结构。
The morphology observations showed that the products were regularly spherical in the shape.
研究了电刷镀镍的工艺、镀层微观形貌与镀层性能。
The process of the brush plating Ni, the microstructure and the properties of the plating layer are studied and analyzed.
试验研究了稀土对涂层的微观形貌及涂层厚度的影响。
The effect of the rare earth on the surface morphology and the thickness of coatings has been investigated.
通过SEM观察，可知主断口微观形貌符合白点断口特征。
By SEM the micro appearance of main fracture conformed to characteristics of flake fracture.
微区分析：对材料的微观形貌、微区成分、微区结构进行分析。
Microanalysis: analyzing the microstructural aspects, micro-constitution and microstructure of materials.
采用结构函数法计算出高速铝合金铣削表面微观形貌的分维数。
The fractal dimension of high speed milling aluminum alloy surface micro-topography is calculated by the structure function method.
通过SEM和XRD分析了黑色陶瓷膜层的微观形貌和相结构。
Morphology and phase structure of the black ceramic coatings were also investigated by XRD and SEM.
采用X射线衍射相结构分析对膜层的微观形貌和膜层进行了分析。
The microcosmic configuration, phase distributions and constituents are investigated by X-ray diffract meter.
观察、分析了镀铝层表面微弧氧化陶瓷膜的微观形貌以及组织结构；
The morphology and the structures of the micro arc oxidation ceramic layer was observed and analyzed.
利用X射线衍射和扫描电镜研究涂层和氧化物膜的结构和表面微观形貌。
The structures and surface morphology of coating and oxide film were characterized using X-ray diffraction and scanning electron microscopy.
其冲击断口微观形貌由室温时的韧窝断口逐渐变为低温下的塑性沿晶断口。
The fracture appearance is dimple at room temperature, it changes into intercrystalline fracture at low-temperature.
SEM对试样微观形貌的研究表明，晶粒大小不均匀是这种材料的微观特征。
Research of SEM indicates that the heterogeneity of grain size is the typical microstructure of the materials.
采用ICP、SEM分析检测方法对产物的杂质含量、微观形貌进行了分析研究。
Analysis is made by ICP and SEM of the impurity content and microscopic morphology of the product.
用扫描电镜(SEM)分析了亚磷酸三苯酯在A3钢表面所成膜的微观形貌特征。
Micromorphology analysis by SEM is performed on the film of triphenyl phosphite formed on A3 steel.
对断齿齿面的宏观特征、微观形貌、显微组织和渗层深度进行了观察、测试与分析。
The macro characteristics, micro morphology, metallographic structure and carburized layer depth of the fractured teeth were observed and analyzed.
根据断口的宏、微观形貌，认为油管焊接后未及时消除焊接应力，产生了淬硬裂纹；
The macro and micro analysis of fracture indicates that it produces fracture because it doesn′t avoid welding stress in time.
对失效铝合金管进行了宏观形貌观察、材质检验、 断口微观形貌观察及应力分析。
The failure reason of the aluminum alloy tube was investigated by macroscopic and microcosmic appearance observement, quality of material test, the stress analysis.
试验研究了不同微弧氧化电压和脉冲频率对涂层微观形貌，涂层厚度及相组成的影响。
The effects of different oxidation voltage and pulsed frequency on microstructure, thickness and phase constitute of the coatings have been investigated.
分析并解决了测量过程中的技术难题，对纳米表面微观形貌进行了高精度实时自动测量。
Some technical difficulties existed in the measurements are analyzed and solved. The high accuracy real time measurements of nanometer surface microtopography are carried.
采用DSC、XRD、SEM等研究了赤泥微晶玻璃的热学特性、相组成以及微观形貌。
The crystal phases and microstructure of the as-received glass-ceramics are investigated by DSC, XRD, and SEM.
通过对阳极氧化膜的SEM微观形貌图及其他电化学参数的分析，推断氧化膜为分层结构；
With the analysis of SEM micrograph of the oxide film and other electrochemical parameters, the construction of the oxide film by layers was presented.
采用数值模拟方法探究恒力模式下探针耦合变形对微观扫描力信号、微观形貌信号的影响。
Numerical simulations of micro scanning forces and micro topography are presented to investigate the influence of the coupling deformation of AFM probe under the AFM contact mode.
研究表明，“沿晶”、“多边化”和“扇形解理花样”是稀土锆合金断口最常见的微观形貌特征；
The results show that the crack and the hole are the primary microdefect of fracture.
采用涂层断面金相、X射线衍射、扫描电镜分析方法，研究了涂层微观形貌、组织结构、组成成份。
With coat section metallographic, X-ray diffraction and scanning electrical mirror analysis method, have studied coat microscopic shape look, organization structure and the coating's composition.
研究纳米硅溶胶改性剂对水溶性丙烯酸树脂和钼酸盐组成的有机复合膜微观形貌及腐蚀行为的影响。
Effects of nano silicon sol on micro-morphology and corrosion behavior of organic composite film made up of water soluble acrylic resin and molybdate were investigated.
对一个实际清淤中磨损失效的泥浆泵轮叶片表面进行宏观观察，并利用扫描电镜作了微观形貌分析。
The abrasive erosion pattern of the impeller blades of a used slurry pump is investigated by macro observation, and analyzed by SEM method.
本文不仅描述了采用二阶段加压法工艺复制的CD唱片，还描述了用SEM观察复制信息的微观形貌。
Using this method, we make a copy of Ni Stamper of CD and give the microstructure of the copied information with SEM.
利用SEM和能谱分析，研究了其微观形貌的变化，并对球磨粉末的晶粒细化机理进行了一定的研究。
The morphology of the powders was studied by SEM and EDS, on which the discussion of grain refinement mechanisms is based.
对城市垃圾与煤混烧飞灰进行旋风熔融试验，分析了不同熔融温度条件下熔渣的微观形貌及重金属行为。
The melting characteristics and behavior of heavy metals of fly ashes were investigated under different melting temperatures.
对城市垃圾与煤混烧飞灰进行旋风熔融试验，分析了不同熔融温度条件下熔渣的微观形貌及重金属行为。
The melting characteristics and behavior of heavy metals of fly ashes were investigated under different melting temperatures.
应用推荐