实验表明，随着磨片齿高的降低，打浆后成浆的物理强度性能指标呈下降趋势，而打浆电耗却增加显著。
The strength index of the refined pulp decreased in some extent, as the bar height decreased. On the other hand refining energy consumption increased when the disc was abraded.
结果表明：（1）不同生产厂生产同一牌号，同一规格虽性能指标符合标准要求，但其条件疲劳强度和疲劳寿命是不同的。
The results show that:(1)The conditioned fatigue strength and the fatigue life of products from various plants are different although their trademark and standard used are identical.
界面强度是薄膜涂层材料的最重要的性能指标之一，目前尚缺乏有效的测量方法。
Interface strength is one of the most important properties of coating materials. There are no effective evaluation methods yet.
抗弯强度是水泥刨花板的主要力学性能指标。
Bending strength is the main mechanical performance index for cemented chipboard.
试验证明，用本工艺生产的钢带性能指标完全达到高强度包装用钢带的力学性能要求。
Experiments show that the performance indexes of the banding steel produced by the above process can meet the mechanical property requirements for the high strength banding steel.
试验过程中通过优化调整烧结操作参数等，提高了烧结矿转鼓强度，使燃料消耗下降，改善了烧结矿冶金性能指标。
During the experimental period sintering parameters were optimized and adjusted, which improved sintering indexes, such as tumbler strength, fuel consumption, sinter metallurgical properties etc.
作为结构材料的聚合物而言，强度和韧性是两项最重要的性能指标。
For structural polymer materials, strength and tough are the most important properties.
这种交换标准是建立在绝对和相对信号强度基础上的，其性能指标即平均交换量和平均交换延迟。
The handoff criteria are based on absolute and relative signal strengths. The performance criteria are the average number of handoffs and the average handoff delay.
然后，本文研究了碳纤维分散性对CFRC的导电性和抗折强度等重要性能指标的影响。
Secondly, the influence of the dispersion of CF on conductivity and flexural strength of CFRC are discussed.
经测试，粉刷石膏的各项技术性能指标均符合国家行业标准要求，强度、稳定性明显优于建筑石膏生产的粉刷石膏。
All terms of property test result show that every technical performance index of plastering gypsum has reached the national trade standard. The strength and stability of plastering g...
胶件密度、机械强度、硬度、耐介质系数等性能指标均达到技术要求。
The density, machinery intensity, hardness and medium resistance index of the rubber products meted the technology requirement.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
抗压强度是金属两片罐的一个重要性能指标，而罐底结构影响其抗压强度。
Compressive strength is one important mechanics factors of metal two-piece can and the bottom configuration affects its compressive strength.
大多数产品要求纤网内纤维的排列方向随机分布，即形成杂乱状态，所得产品各方向性能差异最小，主要性能指标强度差异即纵横向强度比要小。
So, beside the uniformity requirement, the web should have more fibers of random orientation which means the difference of breaking strength in length and breadth is small.
用于测定氨纶丝断裂强度、断裂伸长率、定伸长负荷、应力松弛，塑性变形等性能指标。
Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
通过硅橡胶力学性能试验，得出用硅橡胶的拉伸、撕裂、剥离强度等性能指标，可以满足气囊模具的要求。
Tested the mechanical properties of silicon rubber, tensile, tearing and peeing strength can are meet the demand of inflatable bag.
结构强度是车轮重要的性能指标。
The structural strength is the key point to describe the quality of a wheel.
纤维的主要力学性能指标是抗拉强度和韧性。
Principal mechanical properties of metallic fiber include tensile strength and stiffness.
用于测定氨纶丝断裂强度、裂伸长率、伸长负荷、力松驰、性变形等性能指标。
Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
测定了密度、硬度、抗弯强度、断裂韧性等性能指标。
Their density, hardness, flexural strength and fracture toughness were measured.
本文研究了常用强度等级的石灰石石屑代砂混凝土的力学性能，并对各项力学性能指标之间的相关关系进行了统计分析。
The mechanical properties of limestone chip concrete with ordinary strength grade were studied, and the relationships between the mechanical properties were analyzed.
用玻璃纤维增强尼龙6，使其拉伸强度和弯曲强度等性能指标成倍提高。
After glass fiber reinforced nylon 6, the performance index such as tensile strength and bending strength has improved several times.
通过系缆强度性能实验分析了系缆强度曲线四个阶段，得到了系缆屈服强度、破断强度、弹性模量等性能指标。
The intensity curve of cable is divided into four typical phases. The yield strength, breaking strength and elastic modulus can be calculated and the elastic modulus is basically a constant.
研究表明，MLPB能在一定程度上提高有机填料与橡胶基体之间的界面结合强度；同时，也能有效地提高IIR胶料的自粘性能和撕裂强度等性能指标。
It was shown that MLPB could improve the interface combination between the organic fillers and the rubber matrix, and could increase the tear strength and the stickiness of the IIR rubbers.
在保证涂层的结合强度、孔隙率等性能指标的前提下，喷涂成本比国外产品降低一半以上。
The production cost of this system is 53 % lower than that of the relevant equipment abroad and the coatings show the same quality of bonding strength and porosity.
在保证涂层的结合强度、孔隙率等性能指标的前提下，喷涂成本比国外产品降低一半以上。
The production cost of this system is 53 % lower than that of the relevant equipment abroad and the coatings show the same quality of bonding strength and porosity.
应用推荐