考虑的工件变形包括接触变形和弹性变形。
The deformations in consideration include contact deformation and elastic deformation.
研究了纤维树脂基复合材料超弹性变形行为。
The hyperelastic deformation behavior of the fiber reinforced polymer is studied.
材料首先发生弹性变形,然后发生塑性变形。
The material will deform at first elastically and then plastically.
大多固体,一经拉伸或弯曲,都会出现弹性变形这一过程。
Most solids, if pulled or twisted, will give a little in a process known as elastic deformation.
大部分的生物软组织遵守非线性超弹性变形规律。
The most of biological soft tissues obey nonlinear hyperelastic law.
断口主要分为塑性屈服变形区和弹性变形区两部分。
Fracture surface consists of plastic yield deformation area and elastic deformation area.
分析中可考虑体系的弹性变形、内部机构和刚体运动。
The elastic deformation, the inner mechanism and the rigid motion of systems can be properly considered.
本文对轧辊弹性变形理论的几个重要问题进行了研究。
Several problems of theory about elastic rolls deformation were studied in this paper.
精密成形时弹性变形是影响锻件尺寸精度的重要因素。
Elastic deflection is an important factor to influence the accuracy of the formed component in precision forming.
图8.29表示考虑弹性变形及粘度提高对计算结果的影响。
Fig. 8. 29 shows the effect on the solution of including elasticity and enhanced viscosity.
谐波齿轮传动是基于柔轮的弹性变形来传递运动或者动力的。
Being based on the flexible deformation, harmonic drive achieves transferring its motion or power.
瞬间弹性变形和延迟弹性变形均随着应力水平的加大而加大;
The instantaneous elastic, delayed elastic, and viscous deformation increase with stress level.
齿廓弹性变形是影响鼓形齿端齿盘精度和承载能力的重要因素。
Elastic deformation is an important influential factor of indexing accuracy and loading capacity of end-tooth indexing table with drum tooth.
当膜力卸除后,周向弹性变形和径向缩短的弹性变形导致回弹。
When the membrane stress is removed, circle elasticity deformation end radial shorten elasticity deformation make for resilience.
陀螺在加速度作用下的弹性变形,是产生漂移误差的主要因素。
Elastic distortion generated by gyro due to acceleration is the major factor of producing drift error.
正常运行时,联轴器能够吸收仅有弹性变形产生的正常抗压荷载。
During normal operation the couplers are capable of absorbing normal compression loads by elastic deformation only.
考虑地基弹性变形影响,用能量法对高桥墩进行几何非线性分析。
Using energy method, the geometric non-linear of higher bridge pier is analyzed.
通过分析及计算表明:软管的弹性变形所消耗的能量是不容忽视的。
The analysis and calculation indicates that the power loss induced by the elastic deformation of rubber hose can not be ignored.
在刀具前倾面前的金属直接受到压缩,首先弹性变形然后塑性变形。
The metal in front of the tool rake face gets immediately compressed, first elastically and then plastically.
本文提出用弹性变形能与弹复变形能的差值来确定残留变形能的方法。
A method of energy difference between elastic deformation and elastic-recovery deformation is developed to determine the residual deformation energy.
整个焊接板由弹性变形区、压缩塑性变形区、拉伸塑性变形区和熔池组成。
Whole weldment includes practically elastic deformation zone, compressive plastic deformation zone, tensile plastic deformation zone and melting pool.
在有限弹性变形中,边界力的方向与密度将随弹性体的变形而发生显著变化。
In finite elastic deformation, the direction and the density of the boundary force can greatly change with the deformation of the elastic body.
试验结果表明,该控制方案的弹性变形较少,有利于降低末端位置弹性振动。
The experiment result indicates that this control scheme is benefit to depress the elastic vibration of flexible arm end position.
通过拉格朗日方程建立了考虑关节弹性变形的双连杆机械臂系统动力学方程。
Based upon the Lagrange's equation, the dynamic equation of the two robotic arms system with elastic joint has been established.
通过算例,分析了机构的弹性变形和各随机参数对机构运动功能可靠性的影响。
Through an example, the influence of the elastic deformation and each random parameter on the mechanism reliability of motion function is analyzed.
本文从节理化岩体弹性变形能角度导出了含一组节理的岩体的弹性柔度矩阵。
Based on the strain energy consideration, this paper derives a elastic compliance matrix for rock masses with one set of joints.
在设计、改造板带轧机,以及控制和改善板形时都要对轧机辊系弹性变形进行考虑。
Roll elastic deformation must be considered when plate rolling mill is designed and rebuilt and plate shape is controlled and improved.
利用建立的有限元辊系弹性变形模型,分析了变接触支持辊(VCR)的综合性能。
Comprehensive function of varying contact length backup roll (VCR) is analyzed by using the finite element model for elastic deformation of rolls.
在路面的使用过程中,水泥稳定粒料基层弹性变形较小,使用年限长,承载能力高。
During the usage of pavement, elasticity deformation of cement stabilized base is low, with long service year and high carrying capacity.
结构一旦进入非线性阶段,其地震总输入能主要由结构的非弹性变形和阻尼来耗散。
Once the structures step into inelastic work state, the earthquake input energy is dissipated by the damp and inelastic distortion.
应用推荐