开放式数控系统是当前数控技术的研究热点。
Opening CNC system is research hotspot of nc technology now.
开放式数控系统是当前数控技术研究的热点。
Open numerical control system is the research hotspot of NC technology now.
开放式数控系统是当前数控技术研究的热点。
The open numerical control(NC) system is the research hotspot of NC technology now.
介绍了并联机床开放式数控系统的软件、硬件设计。
The paper introduces the design of the software and hardware of the opening NC system for the parallel machine tool.
最后，开发了一个NC嵌入PC型开放式数控系统实例。
At last, an instance of nc - embedded PC open architecture numerical control system is developed.
该算法适用于目前流行的开放式数控系统和各种CNC系统。
It can apply to the current popular open NC and all kinds of CNC system.
简述了开放式数控系统的定义、特点、国内外现状和发展趋势；
This text discusses the definition and the characteristic of open type CNC system, and the developing situation of the home and abroad.
因此，采用开放式数控系统对X52K铣床进行了数控化改造。
So, the open architecture numerical control system is used to carry on the numerical control transformation to the X52K milling machine.
介绍了以PC为基础的开放式数控系统——PCNC的产生背景；
The paper introduces background of open CNC system-PCNC based on PC.
以PC为基础的开放式数控系统在结构和性能上都存在很大局限性。
There exists great limitations in architecture and performance on open nc based on PC.
针对这种情况，本文研究了基于开放式数控系统的数字化采集技术。
Therefore the digitizing collection technology based on open CNC system is studied in this paper.
实践证明，该系统完全能满足现代数控机床对开放式数控系统的要求。
It's proved by practice that this system could completely meet the request of modern numerical control machine tool for open numerical control system.
尽管开放式数控系统的概念已经出现了很久，但在业界一直未能得到统一。
Though the conception of open CNC system, but the definition of it isn't agreed by industry.
本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。
This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine.
开放式数控系统不仅要实现系统的功能属性，还要尽可能地实现其非功能属性。
It realizes not only the system's function properties but also it's non-function properties with open CNC.
在开放式数控系统中，PLC模块的开发在高性能CNC系统中有着重要的作用。
The PLC is an important module to high-performance open CNC system.
总之，软件PLC有着硬件PLC不可比拟的优越性，适应开放式数控系统的发展趋势。
In a word, the soft PLC has got the superior that hard PLC can't compare to, which representative the trend of the open numerical control system.
分析了基于STEP-NC的CNC控制器的三种结构模式，指出开放式数控系统结构。
Three structure model of CNC are analyzed. Furthermore, authors point out the open NC system structure.
在分析开放式数控系统和网络数控技术的基础上，首次提出了数控信息网络存储制造的新概念。
On the basis of analyzing open CNC system and network CNC technology, the new concept of nc information network storage manufacture was presented.
采用面向对象技术，以动态连接库的形式开发开放式数控系统的基本构造单元—软件功能模块。
Software modules in the form of Dynamically Linked Library using object-oriented program technology are design, which are the basic system components.
介绍了基于PMAC的开放式数控系统在栽剪机中的应用，论述了数控系统的硬件构成和工作原理。
This paper introduces the application of PMAC numerical control system in clothes cutter machine. Hie hardware structure and working principal of the numerical control system is described.
为适应开放式数控系统及现代制造技术的发展趋势，开发研制了基于PC机的数控原理实验教学系统。
To adapt to the trend in development of open CNC system and modem manufacture technique, a CNC principle experimental instructional system based on PC is developed.
试验结果表明，这一开放式数控系统可以应用于其他机床的数控改造，且具有一定的经济性和实用性。
The results show that the open numerical control system can also be applicable for numerical control transformation of other machine tool, so it has certain economy and practicality.
经过实例验证，使用本文设计的宏指令系统编制而成的宏程序，完全可以在开放式数控系统上正确运行。
After example validating, the macro program wrote with macro instruction system designed in this dissertation can run well in open NC system.
本文以开发凸轮磨床开放式数控系统为目标，涉及硬件、软件设计两个方面，侧重数控系统的软件设计。
Aimed at developing open architecture CNC system for CAM grinder, the design of hardware and software is included and the software design is the focus in this paper.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
对数控加工程序编辑模块开发的研究，可减轻对数控系统开发的工作量，为构建开放式数控系统提供通用模块。
All research is helpful to reduce CNC system developing work and provides universal part to build open CNC system.
对数控加工程序编辑模块开发的研究，可减轻对数控系统开发的工作量，为构建开放式数控系统提供通用模块。
All research is helpful to reduce CNC system developing work and provides universal part to build open CNC system.
应用推荐