我的专业是应用计算机。
对设计方法进行了详细讨论，并有应用计算分析。
The design method is discussed in detail. Calculation and analysis are also presented.
第二部分：基础地理教育中应用计算辅助教学的研究。
Part Two: Research and application of CAI in foundational Geography education.
描述了建立模糊评价模型的方法，并给出了实际的应用计算。
Methods are described for building fuzzy integrative evaluation model. To illustrate our approach, examples for application calculates are described in the paper.
应用计算感染点数目来确定其传染性，如蚀斑，痘疱及病杜数。
The infectivity is quantified by counting the number of infective centers such as plaques pocks and foci.
构建这些试验并应用计算和图形的方法分析和评估结果的显著性。
Construct experiments and apply computational and graphical methods to analyze and evaluate the significance of results.
构建这些试验并且应用计算和图形方法分析和评估结果的显著性。
Construct these experiments and apply computational and graphical methods to analyze and evaluate the significance of results.
构建这些试验并且应用计算和图形方法分析和评估结果的显著性。
Construct these experiments and apply computational and graphical methods to analyze the significance of results.
应用计算流体力学理论给出了长输管道稳态气体泄漏率的计算方法。
A mathematical model of steady state gas release flow rate in long distance pipeline is given by use of computational fluid mechanics.
应用计算流体力学理论，给出了长输管线气体泄漏率新的计算方法。
A mathematical model for accidental gas release in long transmission pipeline was given, on the basis of computational fluid mechanics.
探求了应用计算流体力学（CFD）研究汽车车身外部流场的可行性。
The possible benefits of the technique of computational fluid dynamics (CFD) used in car body flow-field analysis is highlighted.
近些年来，人们开始应用计算流体动力学（CFD）来求解气动弹性问题。
Years followed, current research has turned toward the application of Computational Fluid Dynamics(CFD) models to the solution of these aeroelastic problems.
应用计算流体力学(CFD)方法计算模拟轿车三维外流场，得出模拟计算结果。
The flow field around a car is simulated with the method of computational fluid dynamics (CFD) in this paper. Some aerodynamic parameters are obtained.
通过应用计算，分析隧道围岩回冻对衬砌的稳定性影响，并讨论了若干防冻害措施。
By calculating, effects of the tunnel wall rock refreezing on the lining stability are analysed. S...
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
主要介绍非晶、纳米晶材料的特性及纳米铁心在逆变焊机上的应用计算和应注意的问题。
This article introduces the character is tics of amorphous and nanocrystalline materials, and the application of anocryst alline iron core on invert welder as well as the points for attention.
本文应用计算流体力学的理论和方法模拟了带内热源的三维空调房间室内气流的湍流流动。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of a three-dimensional air-conditioned room in which there are heat sources.
以工程中常见的弯管为例，应用计算流体力学(CFD)技术，研究管中的流体状态参数。
By taking common bend pipe in the project as an example, and using computational fluid dynamics (CFD) technology, the fluid state parameter was studied.
应用计算几何技术来决定优化的刀具定位和刀具姿态以实现环形刀的5轴自由曲面数控加工。
A method is presented by using computational geometry techniques to determine optimal tool position and orientation for 5-axis machining with torus end-mill.
应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。
The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.
给出了应用计算多刚体系统动力学建立的通用失重人体4关节反向运动学与反向动力学模型。
The 4 joints universal human body inverse kinematics model and inverse dynamics model in weightlessness utilizing computational multi-body dynamics were proposed.
最后简单说明了数据结构转换、坐标系转换、图形裁剪与分幅、图层管理以及应用计算等功能。
At last, this paper narrates several issues, they are conversion of data structure, conversion of coordinate system, cutting out and disparting of map, the management of layer and applied calculation.
本论文应用计算流体力学的理论和方法模拟三维较复杂条件下空调房间室内空气流场的湍流流动。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of three-dimensional air-conditioned room.
应用计算流体力学软件FLUENT，对固体火箭发动机喷管内的二维两相粘性湍流进行数值模拟。
A fully coupled two-phase viscid nozzle flow of SRM is numerically simulated with FLUENT software.
应用计算实验思想，采取自下而上的建模方法，采用多主体建模方式(abm)构建出供应链实验平台。
Applied computational experiment, took the bottom-up modeling method and used multi-agent modeling (ABM) to build a supply chain simulation platform.
应用计算流体动力学软件FLUENT，对QD128航改燃气轮机燃烧室进行了三维数值模拟计算分析。
The 3D numerical simulation of the QD128 aero-derivative gas turbine combustor was performed by using computational fluid dynamics(CFD) software FLUENT.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
应用计算流体力学的方法可以精确地模拟出气流对芯片的冷却情况，对集成电路板气冷系统的设计具有一定指导作用。
We can precisely describe the effect by Computational Fluid Dynamics, which is useful to the air-cooling system design of circuit board.
采用零方程模型和3点动量风口模型，应用计算流体力学软件PHOENICS模拟了某候机厅空调气流组织方案的速度场和温度场。
Simulates the air distribution in an air conditioned airport ball by PHOENICS using zero equation turbulent model and three point momentum draught model.
应用计算流体力学(CFD)方法对转动坐标系下的三维环形密封流场进行了准稳态数值模拟，在此基础上进行了转子动力系数的计算。
Three dimensional annular seal flow field was simulated quasi-steadily with computational fluid dynamics (CFD) method in a rotating reference frame. The Rotordynamic coefficients were calculated.
应用推荐