工程师们计算桥梁的应变和应力。
对316L不锈钢进行了单轴应变和应力控制下的室温和高温循环试验。
An experimental study of the cyclic properties is carried out for 316l stainless steel subjected to a uniaxial straining and stressing at both room and elevated temperature.
主要观察指标：标本的最大载荷、最大应力、最大应变和应力-应变曲线。
MAIN OUTCOME MEASURES: The maximum load, maximum stress, maximum strain and stress-strain curve.
采用该模型模拟了脑部正碰的过程，得到了碰撞过程的速度、能量、应变和应力曲线。
With it we simulate a brain front crash process, and get the curves which describe the process's speed, energy, strain and stress.
进一步推导了应变和应力以及单元的刚度矩阵等，最后通过具体实例验证了高阶四边形流形单元的计算应力和应变的准确性。
The calculation results, with an example shown, demonstrate that high order rectangular element of manifold method can get more accurate strain and stress.
稳定蠕变应变率本构方程是作用在盐岩上的应力偏量的幂次函数和能量与温度的指数函数。
The steady-state creep strain rate is a power function of deviatoric stress and exponential function of temperature and energy.
丝也有许多不同的形态，例如由于辐射状的丝网和环状的丝网的应力和应变不同，它们有着不同的组织结构。
Silk also comes in a variety of forms; the radial strands of a web, for example, have a different composition from the circumferential ones because the stresses and strains on them are different.
最佳答案之间的关系应力和应变在一个特定的物质决心通过拉伸试验。
The relationship between stress and strain in a particular material is determined by means of a tensile test.
应用罗代参数对压延工艺中的凸缘部分进行应力和应变分析。
Lode parameters are used to analyze the stress and the strain of the flange in calendering.
地基沉降计算中压缩层厚度确定方法主要有应变控制法和应力控制法两种。
There are mainly two methods to determine compressed layer thickness in calculating foundation settlements, control strain method and control stress method.
应变速率和应力呈非线性关系。
表明应力应变异常形态的时间特征与地震的孕育和发生有较明显的关系。
The results show that the anomalies' shape character of stress and strain has obvious relation with the development and occurring of earthquakes.
弹性范围，塑料范围（当材料以不变的应力流动时），应变硬化范围和发生颈缩现象以其断裂终止的范围。
The elastic range, the plastic range (during which the material flows at a constant stress), the strain-hardening range, and the range during which necking occurs, terminating in fracture.
研究掺聚醋酸乙烯水泥砂浆的轴拉和轴压应力—应变关系、抗弯性能以及长期粘结抗弯强度。
This paper delivered the relationships of uniaxial tensile and compressive stress with strain and bending properties, and felt-bending strength of cement mortar with polyvinyl acetate (PVAC).
实验结果表明，对于无明显峰值应变的应力-应变曲线，采用加工硬化率方法确定峰值应变和稳态应变是一种有效的方法。
Test results show that for the stress-strain curves with no obvious peak strain, it is a available to use work hardening rate method to determine peak strain and stable strain.
分析了应变率对混凝土弹性模量、峰值应力时的应变、泊松比和混凝土吸能能力的影响。
The relationships between strain rate and the elastic modulus, critical strain, Poisson's ratio and energy absorption capacity of concrete are still studied.
混凝土约束改变了有效应力-应变关系：造成强度和临界应变的增加。
Confinement of concrete results in a modification of the effective stress-strain relationship: higher strength and higher critical strains are achieved.
按照剪切滞后理论和应变硬化规律，研究微复合材料的变形和应力状态。
The deformation and stress condition of the micro-composite are studied according to the shear-lag theory and strain-hardening law.
之间的关系，应力和应变是线性的，由有关的弹性模量对束材料。
The relationship between stress and strain is linear, related by the Elastic Modulus of the beam material.
路基的沉降变形与路基中的应力、应变、强度和稳定性等有关。
The settlement of subgrade has a relationship to stress, strain, strength and stability of subgrade.
今天的儿童正在大量的应力和应变。
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
进一步针对轴对称问题，引入等效应变和等效应力。
The effective strain and effective stress are introduced under the condition of axial symmetry.
根据15年的监测成果，对施工及运行期高边坡和船闸的变形、渗流和应力应变等进行分析。
According to the result of 15 years monitoring, the deformation, seepage and stress-strain of the high slope and the navigation lock during construction and operation periods are analyzed.
数值例题给出了典型生物软组织的宏观载荷-位移曲线和应力应变曲线。
Numerical examples give the macroscopic load-deflection curves and the stress-strain curves of typical soft tissues.
应力应变分析和坝基抗滑稳定性是重力坝设计中的重要内容。
The stress, strain and sliding stability are important contents for the design of gravity dam.
要明确食管的组织力则必须首先明确食管壁的应力—应变关系和零应力状态，而后者又直接反映了在应力作用下组织机械重建的结果。
To understand the tissue forces of the esophagus, it is necessary to know the stress-strain relationships and the zero-stress state that is sensitive to structural and mechanical remodeling.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
应用推荐