这些成果均可供土坝非线性应力应变分析中使用。
All the achievements can be as reference in the nonlinear stress and strain analysis of the earth dam.
这些成果均可供土坝非线性应力应变分析中使用。
All the achievements can be as reference in the nonlinear stress and strain analysis of...
模型建立后对其进行了自重作用下的应力及应变分析。
After the model was built, analyze the stress and strain of the weight load.
以凝固传热模型为基础，建立了连铸板坯应变分析模型。
A strain analysis model for continuously cast slab has been established on the basis of a thermal analysis model.
研究了压电智能梁力电耦合应力应变分析的新理论新方法。
The new theory and new method of the electromechanical stress and strain analysis of piezoelectric intelligent beam are studied.
应用罗代参数对压延工艺中的凸缘部分进行应力和应变分析。
Lode parameters are used to analyze the stress and the strain of the flange in calendering.
应用罗代参数对压延工艺中的凸缘部分进行应力和应变分析。
In this paper Lode parameters are used to analyze the stress and the strain of the flange in calendering.
应力应变分析和坝基抗滑稳定性是重力坝设计中的重要内容。
The stress, strain and sliding stability are important contents for the design of gravity dam.
本文用有限元素法对轴对称旋转板、壳进行了应力、应变分析。
By adopting finite elements method to make the the analysis of stress and strain of axisymmetric rotating shells.
在钢绞线应变分析的基础上，提出总体配箍特征值的计算方法。
Based on the experimental results, the resistant capacity and rigidity of column are studied.
本文提出用摄动边界元法对材料非线性问题进行应力、应变分析。
In this paper a perturbation boundary element method is proposed to analyse stress and strain for the problems with nonlinear materials.
这两种方法分别在纯剪切和山字型构造应变分析中得到成功的应用。
The two methods are successfully applied to in- plane moire analysis of pure…
研究了一个新的动脉壁零应力状态测量方法和动脉壁应变分析方法。
The zero stress state of an artery is brought by cutting a ring of the artery radically and, then, the ring segment springs open into a sector.
本文针对多轴比例恒幅加载情况下的缺口件进行了应力应变分析和寿命预测研究。
In this paper, the stress-strain analysis and life prediction for the notched shafts were studied under multiaxial constant amplitude proportional loading.
滑坡属于地质力学的范畴，建立适当的力学结构模型，进行理论上的应力应变分析。
Landslide is the scope of geomechanics, the establishment of an appropriate model of the mechanical structure, the theoretical stress and strain analysis.
通过对板料弯曲变形应力应变分析，提出了几种近似计算最小相对弯曲半径的方法。
A few methods, which approximately calculate minimum relative bending radius, are put forward by analyzing the stress and strain as plate bending deformation in this paper.
在对裂尖弹塑性应力应变分析的基础上，作者建立了疲劳裂纹扩展的应变累积模型。
Then, the strain accumulation model of EPFC growth is presented based on an analysis of elastic-plastic stress and strain at the crack-tip.
采用应力应变分析方法研究回转包装容器吹塑成型变径部分尺寸和性能的影响因素。
Influencing factors on the dimensions and the performance of the variable radius section of packing container were investigated using stress-strain method.
本文介绍了利用变形椭球体理论，对花岗岩组构(叶理、线理)进行应变分析的方法。
This paper introduces the method for a strain analysis of the fabric (foliation and lineation) of granite by using the theory of the strain ellipsoid.
通过引入应力复数和应变复数的概念，提出了平面应力分析和平面应变分析的复数方法。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
本文对大变形理论网格法技术以及与网格应变分析相联系的几何模拟法进行了深入的研究。
In this paper, the technology of large deformation square grid and the geometrical simulation which is closely allied with the square grid strain analysis, are studied deeply.
分别进行了不同粘贴形式下加固钢筋混凝土T形梁的极限承载力、变形和应力-应变分析。
The paper respectively carries through the deformation, stress and strain and ultimate flexural resistance of the reinforced concrete Tee-shaped beam under the different gluing forms.
简要介绍了成形应变分析技术的原理、方法，并应用这种技术对汽车冲压件进行了优化选材。
This paper briefly presents principle and methods of forming strain analysis technology, and option of materials by taking this technology.
该计算方法的提出不仅有利于微齿轮接触齿廓间粘附分析，而且对微齿轮应力应变分析提供一种新思路。
The presentation of the method is not only in favor of the adhesive analysis between the contacting faces also offers a new thought for the stress and strain analysis of microgear train.
大型固结试验所获得的参数，是坝基应力应变分析的重要数据，而此项试验研究工作，在东北地区尚未广泛开展。
The data from a large - scale consolidation test are important for the stress and strain analysis of a dam foundation.
一级设备在核设备中非常重要，在该设备的设计和调试的过程中需要对其进行应力与应变分析，从而确保其安全性。
The class 1 equipment is very important in the nuclear device, in the design and testing process required to carry out their stress and strain analysis, so as to ensure their safety.
以带气膜冷却孔的航空燃气涡轮发动机涡轮叶片为研究背景，引入了等效概念对密布小孔结构进行了详细的应力-应变分析。
An equivalent no-perforated plate concept is introduced in the stress-strain analysis for densely-distributed film cooling holes on turbine blades of gas turbine engines.
方法：在后牙单种植体支持式义齿上部结构不同载荷点分别施加载荷，以电阻应变法对种植体颊舌两侧组织进行了应变分析。
Methods: Strains of the tissue around the implant were tested and effects of nine load locations were analyzed by resistant strain method.
同时表明：充分利用ABAQUS已经具备的非线性分析功能，二次开发是完成混凝土面板堆石坝三维非线性应力应变分析的有效解决方案。
Moreover, fully utilizing the nonlinear analysis capacities provided by ABAQUS, redevelopment is a shortcut and an effective solution to accomplishing stress and strain analysis for CFRD.
业务分析员的组织管理严密的建模过程是随需应变业务流程生命周期方法学的关键。
A business analyst's top-down modeling is a key element of the on demand business process life cycle methodology.
应用推荐