探讨了等强度悬臂梁的动应变分布。
Distribution of dynamic strains for beam of constant strength has been investigated.
讨论高阶应变梯度对纳米纤维轴向应变分布的影响。
The influence of high-order gradient of strain on static analysis of nanofibers is discussed.
通过应变分布影响系数把应变疲劳与应力疲劳联系起来。
Strain fatigue and stress fatigue are related by the influence coefficient of strain distribution.
同时，对变形区内的应力应变分布特征作了较详细的分析。
In addition, the distribution characteristics of mean stresses and mean strains in the deformation zone have been investigated.
分析了典型实物拉深零件JD90型摩托车油箱的应变分布特点；
The feature of strain distribution in a typical deep drawn part JD90 motorcycle tank was analyzed.
应用有限元法，编制子程序，研究了重力坝应力和应变分布规律。
Applying finite element method and programming subprogram to study distributed regularities of concrete gritty dam's stress and strain.
材料拉伸力学性能对缺口前端的应力、应变分布总体上影响不大。
The tensile mechanical properties of materials have a little influence on the stress and strain distributions in front of notches.
论述了该型催化转换器的气体流动特性、温度分布和塑性应变分布。
Discuss the gas flow characteristics, temperature distribution and plastic strain distribution of this catalytic converter part.
同时研究了合金颗粒和基体应力、应变分布，以及轧制量的影响。
The distributions of stress and strain after hot rolling and effects of milling thickness were investigated with the evolvement of state from sliding to sticking.
分析了甘蔗种植机机架在弯曲和扭转组合工况下的应力和应变分布。
The stress and strain of the vehicle frame when bearing bending loads and bending-torsion loads are analyzed.
研究了多曲率旋转壳体胀形过程中各部分的应变分布及位移变化规律。
The strain distribution and displacement variation of multi-curvature revolving-shell in the hydro-bulge forming process was investigated by experimental method.
通过线性分析初步了解了轴压下仓壁柱承钢筒仓的应力应变分布特性。
At first, linear stress analyses were performed to investigate the stress-strain distribution of axially compressed column-supported steel silos with engaged columns.
由计算的应力应变分布形态所展示的亚微观断裂性质与实验观察相符。
The microscopic fracture mechanism revealed by these stress distributions coincides with experimental observations.
摘要超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布。
Commonly, ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression.
由于起落架的结构比较复杂，很难通过理论计算得出准确的应力应变分布。
It is difficult to calculate theoretically the exact distribution of the stress and strain because of the complex structure of landing gear.
通过实际管材在CNC弯曲过程中的计算，得到内部应力、应变分布及变形。
This programme can be applied universally and can be use to anyalsis some kinds of pipe. Practice pipe of CNC bending compute, gained the interior stress?
用塑性理论求得杯形件拉深成形工艺过程中凸缘部分的应力与应变分布的解析解。
The paper mainly focuses on the analysis of the distribution of stress and strain in the flange of a cup-shaped part during deep drawing, according to the plastic mechanics theory.
详细地分析了该条件下的坯体致密规律，应力应变分布规律和粉末质点流动规律。
Finally the compacting principle of the billet, strain and stress distribution and powder particle flowing rule are analyzed in detail under this condition.
通过分析可得，粘贴层剪切应力的分布与致动器端部附近的应变分布有相似的特征。
This paper shows that the shear stress distribution in bonding layer has similar characteristics as the strain distributions near the ends of the actuator.
通过分析可得，粘贴层剪切应力的分布与致动器端部附近的应变分布有相似的特征。
This paper shows that the shear stress distribution in bending layer has similar characteristics as the strain distribution near the ends of the actuator.
通信光缆拉伸应变分布测量对于保证光纤通信线路的长期可靠性具有十分重要的意义。
The measurement of tensile strain distribution of optical fiber is very necessary to guarantee the long-term reliability of optical cable.
辊模拉拔变形区内的应力应变分布特征完全不同于固定辊模拉拔，而倾向于轧制过程。
The distribution of stresses and strains in the deformation zone under roller dies drawing is different from that under fixed rolls drawing, but tends towards rolling.
应变分布、主要成形参数对成形过程的影响以及成形过程中可能产生的缺陷进行了分析。
The stress-strain distribution, the effect of the main forming parameters on forming process, and the possible flaws in the forming process are analyzed.
目的在平衡牙合及非平衡牙合状态下，对上颌总义齿沿基托中线应变分布进行比较研究。
Objective To study the strain distribution along midline of maxillary complete denture base under the condition of balanced and unbalanced occlusion.
采用薄板弯曲理论研究了均匀载荷作用下多晶金刚石方膜在小挠度和大挠度下的应变分布情况。
The strain distribution based on small and large deflection theories of diamond square diaphragm was studied using theories of plate bend.
分析发现，与无缺陷焊点相比，气孔使焊点中应力应变分布发生了改变，使焊点疲劳寿命缩短；
The effect of gas hole location on SMT solder joint fatigue life has been analyzed by finite element method .
并对壳体的应变分布、胀形前后的壁厚分布及直径变化进行了测量，指出了变厚度球壳的应用前景。
The strain, thickness distribution, diameter variation are analysed, and finally the practical prospect of the technology is pointed out.
并对壳体的应变分布、胀形前后的壁厚分布及直径变化进行了测量，指出了变厚度球壳的应用前景。
The strain, thickness distribution, diameter variation are analysed, and finally the practical prospect of the technology is pointed out.
应用推荐